Used Helmut Of Its Laminar Airflow Extraction for sale (14,118)

Condition: used, mileage: 3,25,000 km, Year of construction: 2010, Field of application: Freight transport Serial number: WDB9066571S48xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21039 Specifications: 2010 model Approx. 325,000 km Wheelbase: 432.5 cm 4x2 drive 190 hp Diesel New belts New idler pulley Rear brake pads recently replaced Front shocks and brake pads replaced last year Lhjdpfx Ajw H Ifusdwjb Good summer tires Winter tires included Rearview camera Webasto heater TV DVD / DAB / Radio Microphone Quality sound system Delivery by agreement Description: Mercedes Sprinter 519 minibus, 2010 model, with 16+1 seats and two sets of tires. Rear brake pads have recently been replaced, and both shock absorbers and front brake pads were replaced. There is some rust on the doors and above the wheel arches. Available by arrangement. Km: 325000 HK: 190 Technical approved: Yes EU-approved until: 24.11.2026 Own weight: 3730 Total Weight: 5000 Payload: 1195 Width: 199,3 Length: 734,5 Euro: 5 Model: Sprinter 519 minibuss 16+1 seter m/ 2 sett dekk

Condition: used, Year of construction: 2023, Machine in operational condition! Ask for spec and pictures1 Also feeders can be bought separate: Radial Feeder CENCORP RTF 60 Strip Feeder CENCORP Lhsdpfx Aox Up D Uodweb Located in EU!

Condition: excellent (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, exhaust gas temperature (max.): 400 °C, Smoke Extraction Roof Fans from Stock Manufacturer: Nicotra-Gebhardt 2 units RDM 56-4550-4W-16 Airflow: 6,250 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 2.2 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €3,019 – 60% discount 1 unit RDM 56-5671-6W-21 Airflow: 12,000 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 9 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch Lsdpfexuwqgox Adwehb List price: €4,606 – 60% discount 1 unit RDM 56-3535-4W-10 Airflow: 2,050 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 0.55 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,213 – 60% discount 1 unit RDM 56-2528-2W-11 Airflow: 2,850 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 1.1 kW Voltage: 3x230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,023 – 60% discount These as-new fans were initially installed but never operated. As the intended purpose was not achieved, the fans were removed again and are now palletized and ready for collection.

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Lhjdpfx Ajx Agpzjdwjb Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2025, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak Lhedpfx Asvzqtxedweb

Condition: new, Year of construction: 2025, A machine designed for aluminium and steel chips (not aluminium dust) as well as grinding dust collection from machines, along with cleaning workstations. A side turbine makes the collector perfect for connection to machines that produce large number of chips. Also equipped with a dust filter and a tank (a drawer) for by-product removal. Machine features Quick and easy filter replacement Large container for waste with easy access Compact and stable body High efficiency Technical data Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400V/50Hz Intake connectors 2×100 mm Suction efficiency without bag 2200 m³/h Suction efficiency with bag/hose 1500 m³/h Dimensions 840×660×710 mm Ledpjvuq Amjfx Adwohb Weight 72 kg

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS Lodpfx Ajuc Unqodwehb 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: new, Year of construction: 2025, Metal Dust, Chips and Shavings Extractor MDC800 230V The MDC800 metal extractor is a professional device designed for effective extraction of chips, shavings and dust generated during metalworking processes. Its high efficiency, robust construction and easy operation make it a reliable piece of equipment for grinding and production workstations requiring constant cleanliness control. Key Advantages of the Machine High extraction efficiency – an airflow of up to 1800 m³/h ensures effective removal of even large volumes of metal chips. Versatile application – ideal as a chip extractor, grinder extractor, polisher extractor or for other metalworking equipment. Compact and stable construction – the rigid housing ensures safe operation and minimizes vibrations. Quick access to the container – makes emptying easier and reduces downtime. Easy filter replacement – quick and convenient access. Construction and Technology The MDC800 is designed for intensive and continuous industrial operation. The robust 0.75 kW motor runs at 2800 rpm, providing a constant and stable airflow. The dual 100 mm suction inlet system allows simultaneous connection of two workstations, significantly increasing work efficiency. The large impeller diameter of 325 mm improves the system’s aerodynamic performance and enables extraction of larger metal chip fractions without the risk of clogging. A spacious collection container ensures long operating cycles without frequent emptying. Precision and Work Efficiency The MDC800 metal chip extractor provides even and stable airflow with both single and dual inlets. The performance of 1800 m³/h (single inlet) and 1520 m³/h (dual inlet) ensures effective capture of contaminants generated during grinding, drilling, milling and other machining operations. Applications The device is ideal as a: extractor for bench and belt grinders, metal chip and shaving extractor in locksmith workshops, metal dust extraction system in tool shops, extraction unit for polishing and deburring processes. Standard Equipment large-capacity chip container, Lhedpfjx E Udhex Adwob replaceable filter, dual suction inlet 2 × 100 mm, stable, compact steel casing. Technical Data Specification Value Motor 0.75 kW, 230V Speed 2800 rpm Suction inlets 2 × 100 mm Airflow (single inlet) 1800 m³/h Airflow (dual inlet) 1520 m³/h Impeller diameter 325 mm Chip bag size 330 × 500 mm Dimensions 580 × 480 × 1016 mm Weight 55 kg

Condition: new, Year of construction: 2025, The DCV8900E+ professional industrial extraction unit has been designed for the most demanding working environments. It is a high-performance unit designed to remove sawdust, dust and shavings from carpentry machines, guaranteeing continuous extraction performance throughout the production cycle. Thanks to its compact design and high suction power, the central extraction unit is suitable both as a stand-alone unit and as part of a multi-point extraction system. Technical data Motor power S1 7.5 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 8900 m³/h Suction nozzle diameter 300 mm Suction speed 32 m/s Number of filters 45 Filter material Polyester (5 microns) Filter area 20 m² Dimensions (L x W x H) 2400 x 1170 x 2240 mm Weight 500 kg Standard equipment 45 polyester filters (5 microns) metal rotor and rotor housing hermetic film containers Lhedjwwq Ndspfx Adwob integrated filter cleaning system

Condition: new, Year of construction: 2025, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 Lhsdpfxsuc Uchs Adwsb DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: new, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE Lhodpfxevuggho Adwsb 230V or 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg The price given is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE Lodpfxoxzrzae Adwjhb 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Lhedpfjudalwjx Adwob Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Lhjdpfx Adewl Dn Aewsb Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg MACHINE USED: RETURNED, REPAINTED, VISIBLE SIGNS OF PAINT, 100% OPERATIONAL

Condition: used, machine/vehicle number: W09STTB3NBEN1xxxx, Year of construction: 2012, Please contact ATS Norway for more information Lhodpfxjvgx Syj Adwsb Please provide reference number upon request: 18972 Specifications: - 2012 model - 3 axle - Turn on 3 axles - Lift on 1 axle - Box space - Tvinge fasteners - Extension at 5.5 metres - Internal length on 1. stage: 4,422 m - Internal length on 2. stage: 9,021 m - Total internal length: 13,475 m - Ready for delivery Description: Everything work as it should according to the new owner. Ready for delivery Technical approved: Yes EU-approved until: 02.04.2026 Own weight: 10560 Total Weight: 50000 Payload: 39440 Width: 255 Length: 1378 Model: 3 akslet jumbosemi m/ utrekk på 5.5 meter

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included. Lsdpfx Adjx Ncu Aowjhb

Condition: used, Year of construction: 2008, operating hours: 4,105 h, CE mark: yes Serial number: 75xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21490 Specifications: 2008 model 4105.4 hours 17165 kg Certified to: 05/25 110 kW Tires (see pictures) Support paws Crew basket Lifting height: 24.1 meters Range 17 meters Radio control 1 manual pallet forks 1 hydraulic pallet forks Jib with winch (1.5 tons) Chains Climate Light Radio Ready for delivery   Description: We have a 2008 Manitou MRT2540 w/ radio control, crew basket, 2 sets of pallet forks, jib with winch (1.5 tons) for sale. Everything works as it should and all services have been taken by Hesselberg continuously. However, errors and shortcomings may occur as it is from 2008. Handsome Manitou used on construction sites for various lifting and moving jobs. Ready for delivery Hours: 4105 Own weight: 17165 Kw: 110 CE: Yes Ljdpfx Aexm Thrjdwjhb Model: MRT2540 m/ radiostyring, mannskapskorg, 2 sett pallegafler, jibb med vinsj (1.5 tonn)

Condition: used, Year of construction: 1999, operating hours: 6,985 h, machine/vehicle number: 990288xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 20494 Specifications: - 1999 model - Hours: 6985 (will increase slightly) - Certified to: 04/26 - 13700 kg Lsdpfxjwph Ete Adwshb - 39kW - Max lift height: 20.8 m - Max weight in basket: 230 kg - Tilt on basket - ​​Diesel - Engine type: hatz 3L41c - Batteries - Control panel in basket - ​​Ready for delivery Description: We have a 1999 Haulotte H23 TPX Telescopic lift w/  Max height of 20.8 m for sale. The lift works as it should according to the owner. It is also certified to 04/26. Well cared for and maintained by the owner. Ready for delivery Hours: 6985 Total Weight: 13700 Year controlled: Yes Year controlled until: 04/26 Km/t: 39

Condition: used, Year of construction: 2015, operating hours: 5,231 h, functionality: fully functional, machine/vehicle number: 2015019, type of input current: three-phase, overall weight: 1,590 kg, input voltage: 400 V, total width: 1,756 mm, total length: 2,066 mm, total height: 3,643 mm, power: 15 kW (20.39 HP), input frequency: 50 Hz, Equipment: oil mist separator, type plate available, Oil mist extraction from the workshop, plug & play filter tower for extraction during emissions of coolant lubricants in production halls. Filter ventilation tower IVAT Air FTower 20,000M. Ideal for aerosols, oil mist, emulsion mist and vapors. Industrial hall filtration ventilation – suitable for various technical manufacturing processes in production facilities, primarily in metalworking. In many cases, the extraction systems installed directly on machines for coolant recovery are either insufficiently efficient or not installed at all. Setup operations on machine tools, frequent opening of machine enclosures, or missing covers on machining heads can result in oil mist escaping from the machine area and reaching work zones, where employees are exposed to harmful mists and vapors. Installing a ventilation tower significantly improves air quality at workstations and should be considered the ideal complement to industrial hall filtration ventilation – especially where complete separation of oil mist via coolant recovery systems is either not possible or difficult to implement. Includes automatic room air and temperature monitoring. An innovative PLC control system compares sensor data and detects any exceedance of thresholds at workstations or increased temperature directly at the hall ceiling, then fully automatically regulates temperature and air quality. Filters are barely used, see images. Price ex works, pick-up only. Lhodpfsxqf Hzsx Adwsb

Year of construction: 2021, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20825 Lhsdpfxowwgnie Adweb Specifications: - 2021 model - 2000 liters - Hydraulic pump - Hydraulic hoses - Hose reels - Ready for delivery Description: We have a 2021 Simed NCS 2000 Hydraulic washer of 2000 liters for sale. Everything works as it should according to the owner. Has previously been on a Durso multimobil X. But can also be used for other vehicles. Ready for delivery

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 2,200 mm, volume flow: 2,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, warranty duration: 12 months, power: 3 kW (4.08 HP), Extraction system for double mitre saws or saws used in the aluminium sector. Lhsdpfx Aowii Hxedwsb The extraction unit is perfectly suited for aluminium / PVC / steel. Very powerful and extremely quiet extraction system operating below 80dB! 2600 m³ per hour extraction capacity 3KW motor Includes 14 meter hose with 2 outlets.

Condition: used, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan Lodpforh Niaex Adwehb -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg

Condition: used, Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates Lhjdpfx Ajrh Nidedwob -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm Lodpfxeryalie Adwjhb -Weight: 100 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm Ledpfxot Rbhzs Adwohb -Weight: 9.2 kg