Mobile extraction system

Nestro

Condition: used, Year of construction: 2000, Used Machine Year of Manufacture: 2000 Features and Technical Specifications: - Nominal airflow: 5,040 m³/h - Minimum airflow: 3,532 m³/h - Inlet diameter: 250 mm - Filter area: 25.23 m² Iodozuuncopfx Acreba - Number of collection tanks: 3 - Negative pressure: 2,600 Pa - Collection tank capacity: 480 l - Motor: 5.5 kW - Automatic filter cleaning - Filter category: H2 - CE mark: Yes - Dimensions: approx. 350 x 100 x 230 cm - Weight: 740 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: Ibjdpoyi Efcofx Acrea - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Isdpfx Ajzt Ipkecrsba Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), functionality: fully functional, For sale is a compact and mobile Nestro dust extraction system for extracting wood chips and dust from woodworking machines. The mobile design allows for flexible use of the extraction system on different machines. The system features a filter and a chip collection bag and is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data: Ibsdpfx Ajztau Eocrea Manufacturer: Nestro Motor power: 1.1 kW Extraction connection: Ø 140 mm Mobile design Filter unit with filter bag Separate chip collection bag Direct extraction at woodworking machines Compact design Equipment: Filter bag Chip collection bag Extraction fan Extraction nozzle Ø 140 mm Chassis with rollers Suitable for extraction, for example, on circular saws, milling machines, planing machines, and other woodworking machines – depending on the required air volume flow and extraction connection. Scope of delivery: Nestro dust extraction system Filter and chip collection bag Accessories as shown in the photos The machine can be inspected and tested under power after prior appointment. Transport is possible for an extra charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, 5.5 kW (7.5 HP), 3 spindle speeds Iedpfx Aoyw Rz Hjcrjba 15″ touchscreen (19:6) Motorized height and tilt adjustment Double roller carriage 3,200 mm Tilting range 0 – 46° Max. cutting height 154 mm Main saw blade D = 300 – 450 mm Large safety hood Scoring unit with LED lighting Parallel fence DIGIT X, cutting width 1,410 mm Angle-mitre fence 3,450 mm, without length compensation

Condition: used, Year of construction: 2001, functionality: fully functional, volume flow: 7,000 m³/h, We are selling our dry spray booth, manufactured by Nestro, including a fan with an air flow rate of 7000 cubic meters per hour. Discharge diameter: 400 mm. Dimensions: 2400 x 1600 mm. The unit will be dismantled shortly, as we are receiving a new spray booth with a heat exchanger. Isdpjzt Rvyjfx Acrjba

Condition: used, Year of construction: 2001, functionality: fully functional, filter area: 43 m², volume flow: 7,650 m³/h, negative pressure: 2,200 Pa, rotational speed (min.): 2,800 rpm, We are selling our bag filter, type Nestro NAsf5/3. The unit is available for dismantling and collection at our premises. Due to a new acquisition with integrated heat recovery, this unit is now surplus to our requirements. Ijdpfx Acezt Ruvoroba

Condition: as good as new (ex-display), Year of construction: 2025, Semi-automatic under-table crosscut saw, including: - 2 meter roller conveyor to the left of the saw with 1 manual folding stop and 1 pneumatic folding stop - 2 meter roller conveyor to the right of the saw General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connectors: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Standard equipment: Automatic protection and pressure device Two-hand operation and safety shield Carbide-tipped saw blade SAFE The ergonomically positioned two-hand control and safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! ROBUST Legend saws are designed and built to work with challenging materials and hard wood even under tough conditions. The frame is made of thick-walled, fully reinforced and coated steel. Robust, compact, and durable. FAST Isdpew Rcibefx Acreba Compared to a pull or radial arm saw, the LEGEND pneumatically guides the saw blade through the workpiece at extremely high speed. This significantly reduces the physical burden on the operator.

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Ibodpfozh Hw Aox Acroa Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.

Condition: used, Year of construction: 1998, Used dedusting unit Ibsdpfx Aceznfpqorea Year of manufacture: 1998 Note: The unit does not have a fire extinguishing system! Equipment and technical data: - Volume flow: 3,530 m³/h - Suction nozzle: 250 mm - Filter surface area: 25.2 m² - Number of collection containers: 3 - Negative pressure: 2,500 Pa - Collection container volume: 480 l - Motor: 5.5 kW - Automatic cleaning - Filter category: H2 - CE marking: Yes Weight: 740 kg Availability: short notice Location: Flörsheim

Condition: used, Chain chisel machine, chiseling machine Iedpfx Aeqv A U Ijcrsba

Condition: used, 350 mm manual operated ja Dimensions (L/W/H) 1240x900x450 mm Used Item Features and Technical Specifications: - With manual switch lever, painted, sturdy Ibodpfszk N Ayjx Acrea - Connection diameter: 350 mm Dimensions: approx. 1240 x 900 x 450 mm Availability: available shortly Storage location: 63934 Rölllbach

Condition: used, Second-hand extraction parts Pipes in standard sizes from 80 to 350 mm Ibjdpjzk Nlzjfx Acrsa Branch pipes from 80-80-80 to 350-350-350 Elbows: 22.5°, 45° and 90° Electric valves Pneumatic valves Control systems All types of special components If you are interested in a quotation, please provide your detailed specifications Availability: immediate Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2014, Spänex SMU 6000.1 Extraction diameter: 300 mm Ibodoxlk Tvopfx Acrja Motor power: 7.5 kW H3 tested 2 bins of 165 l each Space requirement: 2710 x 900 x 1965 mm Price: 10,000.- Condition: Function tested

Condition: used, Year of construction: 1997, Suction nozzle diameter: 200 mm Maximum volumetric flow rate: 3,200 m³/h Nominal volumetric flow rate: 2,862 m³/h Volumetric flow monitoring: Differential pressure display Negative pressure: 2,336 Pa Ijdpfex Edmvsx Acrjba Filter surface area: 16.8 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: dB Chip bag volume: l Filter cleaning: Pneumatic Motor power: 4 kW Machine length: 2,300 mm Machine width: 900 mm Machine height: 2,200 mm Weight: 350 kg