Used Hermle U 1130 for sale (153)

Condition: good (used), Year of construction: 2014, 1 unit CNC Machining Center C 400 U with 5-axis simultaneous Heidenhain control iTNC 530 Manufacturer: Hermle Year of manufacture: 2014 Technical Data Working Area: - Travel distances X-axis 850 mm Y-axis 700 mm Z-axis 500 mm - Swivel range A-axis +91 / -139° - Swivel range C-axis 360° - Direct path measuring system - Resolution 0.0001 mm - NC rotary table 650 mm diameter - Table load capacity 600 kg - A-axis rotation speed 25 rpm - C-axis rotation speed 30 rpm Main Spindle Drive: - Drive power (100% – 20% duty cycle) 10 – 20 kW - Torque (100% – 20% duty cycle) 87 – 180 Nm - Speed range 20 – 15,000 rpm - Spindle taper SK-40 Rapid Traverse In X / Y / Z axes 35 / 35 / 35 m/min Linear acceleration 6 m/s² Tool Changer: - Magazine capacity 81 tools (extended magazine) - Tool diameter 80 mm - Chip-to-chip time (per VDI 2852) 6 sec. Hsdpfx Aajw N Ip Dobjfn Space requirements 5.85 x 4.10 x 3.10 m Machine weight approx. 10.0 t Equipment HH probe, electronic handwheel, Blum tool breakage/ measurement A2, with ICS 40 bar, air blow-off device, swarf flush gun, electronic thermal compensation, tool holders SK-40 Delivery terms: Ex stock Hessen, Bad Emstal Delivery date: By arrangement; machine can be demonstrated under power.

Condition: used, Year of construction: 2005, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Siemens weight of the machine ca. 9500 kg Hsdpfxow Sahdo Aabefn

Condition: used, Year of construction: 1999, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm Hedpfx Ast Rmffeabefn total power requirement: 35 kW weight of the machine ca.: 6,5 t table-size: 600 x 370 mm tool taper: ISO 40 tool diameter: 80 mm tool length - max.: 250 mm no. of tools in magazin: 30 speeds: 12.000 U/min feed power: 6000 N kp power capacity: 9,0 kW 5-Axis CNC Milling Machine Spindle: 15113h *

Condition: used, Year of construction: 2022, x-travel 450 mm Hedpfxewh Ukts Aabofn y-travel 600 mm z-travel 330 mm Control Heidenhain TNC 640 spindle HSK A 63 turning speeds 18000 U/min swivable table: STP 320mm Tools changer 55 fach/tools Internal cooling system 80 bar Chip coveyor JA Spindle hours 7521 h Machine on 10.532 h weight of the machine ca. 8,7 t 5-axis CNC machining center -Equipment & accessories -Dynamic Efficiency (ACC, AFC, vortex milling), -Dynamic Precision (CTC,AVD,LAC), -Additional magazine ZM216, torque drive in the C axis, -Spur gear tandem drive -in the A-axis, car. Cabin roof including side panel, interior -Scratch belt conveyor, chip washing gun, electric. heat compensation, -Tool breakage monitoring, robot cell RS05-2

Condition: used, Year of construction: 2000, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 430 Hfodpfx Aev T Nr Rjabsn turning speeds 10.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 600 U equipped with a 30-tool changer, a swivel axis, and an NC combination table (600 x 370mm / ø 280mm). The machine has approx. 17.754 H spindle hours. Additional equipment: - Swivel axis - NC combination table (600 x 370mm / ø 280mm) - Probe system (SK 40 - RENISHAW) - Tool breakage monitoring The machine is in well-maintained condition, has been used exclusively for educational and training purposes, and can be inspected under power at any time. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 600 | C600 | C-600 | C600U

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Hedpfx Aowhrfzjabofn Tool magazine for 30 tools, SK 40

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Hjdevytgfepfx Aabjfn Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control switch-on time: 64,299 h Machine switch-on time: 61,676 h Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Hfsdpfx Aaevtmhpsben Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Hfodsvn Si Ispfx Aabon Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: good (used), Year of construction: 1999, Hermle U 1000 T, Built in 1999, Hfjdjwlqimjpfx Aabsn Heidenhain TNC 426 control, X/Y/Z travel 1000/630/550 mm, 16-station tool changer, SK 40 tool holder, Spindle speed up to 7,000 rpm, Vertical spindle quill stroke 75 mm, Universal milling head 0-90°, Direct measuring systems, Table size 1200 x 630 mm, Heidenhain TS 632 touch probe, Electronic handwheel,

Condition: good (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Machine type: Machining center Hjdpfx Aeu Dniteabefn Manufacturer: HERMLE Type: U 740 Control: HEIDENHAIN iTNC 530 Serial number: 16165 Year of manufacture: 2003 Production times Switch-on time: 86,672 hours Working time: 34,362 hours Spindle running time: 27,804 hours Axes and table Total number of axes: 5 Table length: 900 mm Table width: 500 mm Number of T-slots: 8 Distance between T-slots: 65 mm T-slot width: 14 mm Max. Workpiece weight on the table: 700 kg Longitudinal travel (X-axis): 915 mm Transverse travel (Y-axis): 500 mm Vertical travel (Z-axis): 500 mm Workpiece size max. Length: 900 mm Width: 500 mm Height: 500 mm Tool changer Number of tools: 16 Tool diameter max.: 125 mm Diameter with free secondary positions: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Milling head Swivel range: -5° to +95° Tool holder: SK 40 Spindle Speed infinitely variable from: 20 rpm to: 12,000 rpm Feed rates Rapid traverse lengthwise: 30 m/min Rapid traverse: 30 m/min Vertical rapid traverse: 20 m/min Connections and power Compressed air connection: 6 bar Electrical connection: 400 V, 50 Hz, 3-phase Spindle power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB(A) Dimensions and weight Machine weight approx.: 7,300 kg Dimensions (L x W x H): 2,760 mm x 2,390 mm x 2,370 mm EQUIPMENT Three-jaw chuck Ø 200 mm Workpiece probe: HEIDENHAIN TS 640 Dividing head 4th axis: HOFMANN, type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Control cabinet Air conditioning unit Machine can be inspected assembled and energized for inspection after consultation.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Hedpfewmm D Njx Aabofn Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: used, Hermle C 600 U 5-axis CNC universal machining center Milling machine Spindle on : 28383 h Control on: 64298 h X-axis: 600mm Y-axis: 450mm Z-axis: 450mm Hedpfx Aaeuqap Robsfn Spindle holder: HSK A 63 Feed range: 1-30000mm/min Speed: 35m/min rotational speed: Ø turntable: 280mm Rotation range: A-axis: +20 / - 90° Rotation range C-axis: 360 Control: Heidenhain iTNC 530 Year of manufacture: 2002 Weight: approx. 6500 kg You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 2004, Manufacturer: HERMLE Type: U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 Machine weight: approx. 8500 kg Tool holder: SK 40 X travel: 1300 mm Y travel: 720 mm Z travel: 630 mm Speed range: 18000 rpm Max. table load: 700 kg Operating hours: 50,775 Spindle hours: 21,654 Space required: approx. 3600 x 4500 x 2800 mm Table size: 800 x 1000 Number of tools in magazine: 28 positions Internal coolant supply: 80 bar Hfjdpfx Aov S Alnoabsn 3D measuring probe: TS 640 5 axes simultaneous

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,007 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 Spindle motor power 15 kW Number of axis 5 Hodpoxnd Tzsfx Aabjfn Movement X-Axis Movement 600 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Table Table load 300 kg Additional Equipment Through spindle cooling 80 bar: -Renishaw workpiece probec/ -Blum laser This 5-axis HERMLE C20U was manufactured in 2007, featuring a robust vertical machining center design. It boasts a spindle speed of up to 18000 rpm and a spindle power of 15 kW. The machine includes a 250mm table capable of handling loads up to 300 kg and a versatile 30-position tool changer. Ideal for piece or small batch production. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of Manufacture: 1995 Operating Hours: 65,071 Control: HEIDENHAIN TNC 426 Hsdpfsv Rxa Sjx Aabofn Working Area X/Y/Z: 600 x 450 x 500 mm Spindle Speed Range: 20 - 6,300 rpm Tool Holder: SK 40 M & H 3D Probe (for workpiece measurement) Vertical-Horizontal Milling Attachment Quill Coolant System Swivel Table: 900 x 458 mm Weight: 4,000 kg Machine Dimensions (LxWxH): approx. 3,900 x 2,000 x 2,000 mm 151025

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,222 h, functionality: fully functional, machine/vehicle number: 14631, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle diameter: 70 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances Travel range X-axis: 800 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Rapid traverse in X, Y, and Z axes: 35 m/min Max. spindle speed: 16,000 rpm Clamping table surface: 1,000 x 560 mm Spindle taper: HSK A63 (DIN 69063) Spindle diameter at front bearing: 70 mm MACHINE DETAILS Control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 3,300 x 2,400 x 3,000 mm Hfedsxnkwgopfx Aaben Weight: 7,000 kg Coolant tank capacity: 300 l Operating hours Spindle hours: 20,222 h Power-on hours: 49,977 h EQUIPMENT 3D probing system Technical documentation Note: The mounting plate currently fixed on the worktable, as well as tool holders and tools, are not included in the scope of delivery or sale.

Year of construction: 1989, condition: good (used), Machine: Hsdpjd I Uwmsfx Aabsfn Control Heidenhain TNC 355 Built in 1989 Travel: X 600 mm method path Y 450 mm process path Z 400 mm method Spindle speed 20 – 4000 min-1 Angular size 850 x 440 mm Swivel cull 650 x 395 mm Electronic hand wheel The machine is still under power and is in good condition.

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 8,5 x 5,5 x 3,0 m Hfodpfx Aoxmagzoabsn 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - FASTEMS - incl. FASTEMS FPC-400 Pallet-System / 15-pos. - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change

Condition: used, machine/vehicle number: 8317, This CNC machining center Hermle UWF 600 is being auctioned online in our industrial auction / machinery auction due to the closure of Bellinger Feinmechanik & Werkzeugbau. Hfedjxlg Amepfx Aabsn

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,025 h, Control Unit Brand HEIDENHAIN This 3-axis HERMLE C 800 V was manufactured in 2001. It features a high-speed spindle capable of 16,000 RPM with both SK 40 and HSK-A 63 interfaces, electronic hand control, and a robust chip conveyor system. Ideal for detailed machining tasks, it also includes an Ethernet interface for easy programming. Consider the opportunity to buy this HERMLE C 800 V vertical machining centre. Contact us for more information about this machine. Application Types Milling Hedpfx Aexnr H Nsabjfn

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel range X/Y/Z: 600 x 450 x 500 mm Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Hfedjv Rpr Sjpfx Aabjn Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm 151025

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Hfsdpjxnkfkjfx Aabjn Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools.

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Hsdpfxok Dz Ngs Aabofn Working travels 800 x 600 x 500 mm Table size Ø 280 mm Table swivelling +/-110° Table rotating 360° Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Condition: good (used), machine/vehicle number: 5387, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, mount diameter: 40 mm, total height: 1,900 mm, total width: 1,200 mm, total length: 1,500 mm, table width: 280 mm, table length: 700 mm, overall weight: 1,000 kg, Including three-axis digital readout Hfsdpfowxpx Hjx Aabjn