Used Herzog for sale (20)

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm – maximum working width 52cm – double rear knife shafts Rcsdpfx Abox Hbkdopef – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Rcodjzqfx Dspfx Abpjf

Condition: used, Year of construction: 2000, Format: 520 x 720 mm Rodszu Spkspfx Abpocf Equipment: 12 bags

Condition: like new (used), Year of construction: 2010, 6 pockets 72 cm working width Rsdpozrnvhsfx Abpscf Pattern image

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Redpfjziphaox Abpjcf

Condition: good (used), Herzog Heymann KL112-6 Pharmaceutical Folding Machine + Press and Stacking Made in Germany. The world’s highest-class folding machine. The machine is ready for production. Infinitely variable feed and folding speed adjustment. 6-cassette module. Rjdpfx Ajzurz Tobpscf Vacuum feeding Desta BAS 350 platen press HH 177 stacking delivery This machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Maximum format: 350x500mm Weight: 650kg 380V power supply

Condition: good (used), Year of construction: 2007, Pick & Place machine including HHS hot melt application system with 4-channel control unit and tank on a mobile cart Rjdpfsyuixkex Abpecf

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 1,760 mm, conveyor belt width: 730 mm, conveyor belt speed: 180 mm/s, total length: 2,000 mm, total height: 1,000 mm, overall weight: 150 kg, input frequency: 50 Hz, motor manufacturer: WEG, Equipment: emergency stop, TAF item number: 1000006117 Manufacturer: Herzog + Heymann Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,000 x 960 x 530 mm Width including side frame in mm: 820 Width including drive unit in mm: 820 Side frame height in mm: 80 Conveyor length in mm: 1,760 Conveyor width in mm: 730 Belt type: Smooth, blue Belt width in mm: 730 Substructure: Included, lifting substructure (H: approx. 530–1,000 mm) Running surface: Wood Drive: Head drive Motor type: Geared motor Motor manufacturer: WEG Motor specifications: 150 W / 50 Hz / 22 rpm Rcodpfx Aboy D T Ddjpof Motor position (in conveying direction): left Conveying speed in m/s: 0.025 – 0.18 Net weight in kg: 150 Special features: manually height-adjustable, stepless speed control, emergency stop, castors, incl. CEE 16A plug Condition: used / fully functional Functional test: OK

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Rcedpfsxwp A Hex Abpef Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: ready for operation (used), Year of construction: 1999, Herzog Heymann small folding machine KL112 – 1250, year of manufacture 1999 Rsdpfsxlu Tyox Abpscf Flat pile feeder, shingled, 176–646, station with 6 pockets Cold glue unit HHS C210 with one glue head 6 segmented folding rollers The second station is not available!

Condition: ready for operation (used), Year of construction: 2003, Deliveries Herzog Heymann stack delivery 502-04 Rcodpfx Asxrwdnsbpef

Condition: refurbished (used), functionality: fully functional, Herzog Heymann folding unit max. working width 42cm Rjdpfx Asvnml Rebpjcf 6 folding pockets Ruler "right" 24-pin MBO control

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, infeed width: 520 mm, Submission of a bid requires collection by the deadline of 31/12/2025! Rcjdpfoxyhg Asx Abpef The offer consists of: Feeder F530 mobile (Serial number: 95080104, Year of manufacture: 2008) Folding unit H + H M7.32 (Serial number: 253/08, Year of manufacture: 2008) Delivery unit H + H 271 (Serial number: 246/08, Year of manufacture: 2008) Transfer unit H+H 246/08 (Serial number: 850.3-363, Year of manufacture: 2008) Knife H+H XS 300/6 (Serial number: 253/08, Year of manufacture: 2008) Small format feeder H+H (Serial number: 204/91 272-0085, Year of manufacture: 1991; bottom suction) Small format delivery Stahl STA30F (Year of manufacture: 1990) TECHNICAL DETAILS Feed width folding unit: 520 mm Number of pockets folding unit: 12

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Rcjdpfx Abexyhnyspsf Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: ready for operation (used), Year of construction: 1980, Herzog Heymann small folding machine KL112, year of manufacture 1980/1985 Rcodpfjvyapyex Abpjf Schuppen feeder 176 1st station KL112 with 6 pockets 2nd station KL112 with 4 pockets Vertical stack delivery 177

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 720 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 90 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left Rcodpfoid Ixdjx Abpsf To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch, emergency stop switch and restart protection. Without Fixing Holder: max. Length of workpiece, finished: 300mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 90kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 720x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks inklusive folgendem Zubehör: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Year of construction: 1984, condition: used, Technical details: material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm feed:: Stufe 2: 0,1 Doppelhub mm air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm - coolant device available * Rcedpfju Ng Sdsx Abpof

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German Rcjdsid Iymjpfx Abpof • 1 piece Wooden Box

Condition: new, End-facing and length grinding machine Manufacturer: HERZOG Model: LY 600 400V version Length tolerance: ± 0.01 mm Angularity: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: Rsdpfx Abod Idb Iepjcf - Measuring stop with micrometer screw - Cup grinding wheel and cut-off wheel - Operating manual

Condition: new, Year of construction: 2021, Vacuum table with servo drive and touchscreen Adjustable vacuum Adjustable drive Rjdpfex Thy Ejx Abpecf Approx. 50 cm working width