Used Hole Puncher for sale (3,340)

Condition: used, maximum load weight: 19,740 kg, overall weight: 28,000 kg, axle configuration: 2 axles, first registration: 12/1999, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,630 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion, subject to errors, typographical errors, and prior sale: Spier 2-axle double-deck box trailer with beams (Vehicle 159) First registration: 16.12.1999 Type: SGL 290 Permissible gross vehicle weight: 28,000 kg Unladen weight: 6,590 kg Payload: 19,740 kg Overall length: 13,800 mm Overall width: 2,550 mm Overall height: 4,000 mm Interior length: approx. 13,450 mm Interior width: approx. 2,480 mm Interior height: approx. 2,630 mm Double deck with 13 beams 12 x beam hole strips from top to bottom + 3 x stacked approx. 3 m in the rear area Reinforced floor Roller shutter door Air suspension with lifting and lowering function Hedpfx Aez Rktxoh Ujfn 2 x 12-ton 2-gear winch Chock 2 x LED reversing lights Tires: 385/65R22.5, 1) approx. 80/40%, 2) approx. 40/40% Ideal for storage, watertight Price: € 2,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to € 5,000.00 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Manufacturer's number: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 pieces Transmission ratio: 1:1 Spindle spacing (center of spindle to center of spindle diagonally): 45 to 138 mm Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collets Overall height from tool holder (bottom) to gearbox housing (outer edge, top): 218 mm - 4 spindle drives with collet chucks (collets are not included in the scope of supply) - 4 tool spindles, adjustable in steps by twisting within the spindle spacing Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition Hjdpfx Ajz Hfclsh Uofn

Condition: used, Year of construction: 2025, color: grey, empty load weight: 2 kg, fuel type: gasoline, gearing type: other, TITLE: NEW FLAT-BED HOIST CONTAINER WITHOUT SIDES AND ZERO TAIL FOR LOADING VEHICLES WITH REINFORCED FLOOR SUPPORTED BY 200 MM BEAMS REINFORCED BY MT. 2.50 IN THE CENTER ON THE OUTER PART PLUS REINFORCEMENT AT THE FRONT YIELD POINT, 2 RETRACTABLE ANCHOR HOOKS AND HOLES ON BOTH SIDES H. 20 CM AND 1 CM PLATE REF.: 22-N-39 TYPE: swap body C NEW: yes COVER: no OPENING: / OVERALL DIMENSIONS TOTAL LENGTH: 6.20 m FRONT SIDE: 1.50 m REAR SIDE: / SIDE SIDE: / INTERIOR/EXTERIOR WIDTH OF BODY: 2.53 m / 2.55 m WEIGHT: 1680 kg BOTTOM FROM: 7 mm almond WALL FROM : / COLOR : gray Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 Hfodpfx Ahevm Ewco Uen URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of advertisements and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Hedpfoz Ebzhox Ah Ujfn Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, suspension: air, tire size: 385/65 R22,5, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, KRONE Cool Liner 3-axle refrigerated semi-trailer, SDR 27 eL4-DS, Krone axles. 1st axle is a lift axle. LED taillights. 2 roll-compression buffers (4 rollers per side). Pallet box (for 36 pallets). Tool box. Duoplex floor. Body length (overall): 13,311 mm. Body width (overall): 2,490 mm (=flower width). Interior height: 2,630 mm. 1 row of slotted-hole lashing rails at 780 mm. Double-deck rails. Refrigeration unit: Thermo King SLX i 300-50, diesel/electric. Sale exclusively to commercial enterprises, with no warranty of any kind. Subject to errors and prior sale. Hjdpez Sp Hmjfx Ah Ujfn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G Hfodpfx Ajz Iw Ezoh Usn MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale are 10 GARANT ZeroClamp clamping devices, type 10012. The clamping devices are used, in good condition, and fully functional. New price per unit: €661.20 plus VAT. Available for sale individually or as a complete package. If you are interested or have any questions, please do not hesitate to contact us. Inspection possible by appointment. Shipping and inspection are possible! Hodpfx Aez E Rdfoh Uofn Product details Technical data Series: ZeroClamp Manufacturer's designation: ZeroClamp clamping device, type: 10012 Clamping device diameter: 120 mm Maximum clamping force: 25 kN Material: Steel Indexing hole available: no Product type: Clamping device Identification & Classification Article number: 360040 10012 EAN / GTIN: 4045197415820 Manufacturer's number: 360040 10012 Description Design: All components are made of stainless or corrosion-resistant steel. The zero-point clamping of the GARANT ZeroClamp system is an important function for modern manufacturing systems, especially in automated manufacturing. Thanks to a special contact interface, it guarantees precise and reliable zero-point repeatability. The pneumatic clamping force of the system holds workpieces securely in the desired position, allowing for quick and accurate workpiece changes without re-positioning. This reduces setup effort and increases productivity. The zero-point clamping of the GARANT ZeroClamp system is essential for efficient manufacturing processes. Learn more about the innovative technology of GARANT ZeroClamp and optimize your production. Application: For individual installation in clamping fixtures.

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width Hsdpfx Asz Ha Hleh Uofn 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Hfodpfx Ahoz Hutto Uen Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2020, For profitable performance. For individual furniture production. For industrial requirements. The profit H80I CNC machining center is an integral part of the intelligent F4®Solutions production process, which will be the only answer to the expectations regarding profitable furniture production in the future. The profit H80 center for cutting, drilling, and milling panels enables highly efficient furniture 4.0 production, guaranteeing a secure future for furniture and woodworking companies. Completely dimensioned furniture components, including all holes, grooves, and joints, will be produced with a single clamping operation at the push of a button. The latest nesting technologies ensure the highest possible material and time savings. The profit H80I can be flexibly expanded, even to a fully automated version, through various loading and unloading solutions, allowing for maximum throughput. With F4®Solutions, a seamless, efficient, and economical production process will be created, taking into account each individual furniture component. Tools in the form of software for extreme efficiency are part of the entire production chain. Simple design of original furniture in a familiar CAD environment. Photorealistic rendering supports communication with the customer through 3D visualization. Accurate transfer of files to all integrated machines, including economical nesting optimization. Even the final assembly of the furniture takes place with the support of clear assembly drawings and 3D files – this is 4.0 for crafts and industry. » Automation solutions FORMAT4. Uncompromising competence for the highest requirements. Hsdpfx Ahsz Hkiws Ujfn The premium brand from Felder Group has been meeting the highest requirements of professional users since 2001. Tailor-made, high-performance solutions are uncompromisingly innovative, offering maximum ease of use and the highest efficiency. drilling/milling head, nesting software for this, a slatted table with dimensions of 2 meters wide and 3 meters long, automatic unloading, and chip blowing. Number of operating hours: 10,000 only.

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch Hsdpfx Ajz Eavwjh Uefn • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Condition: new, Year of construction: 2026, Equipment: documentation/manual, foot remote control, Indexing table, 1500 x 3000 x 200 mm Tabletop thickness: 22 mm, hole diameter: 28 mm Hsdjz D Af Sjpfx Ah Usfn with wireless handheld remote control Swivel range: 360° Height adjustment: hydraulic, motor range 800 to 1200 mm Speed: 0.5 RPM Motor power: 0.75 kW We offer the tables in various sizes and load capacities: Load capacity: 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker Hodpez Dth Rsfx Ah Uofn • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: used, Year of construction: 2011, CNC machining center Manufacturer: Homag Type: BMG311 Venture 316L Year of manufacture: 2011 Technical data - Design: 5-axis CNC machining center - X-axis travel: 4,200 mm / 4,375 mm (with hole diameter 25 mm) Hfedpfx Aez E Hpdjh Usn - Y-axis travel: 1,400 / 1,550 mm (limitation in drilling operations) - Z-axis travel: 250 mm - Workpiece thickness: up to approx. 250 mm - Cantilever table: 8 cantilevers, LED positioning aid - Vacuum: 2 vacuum pumps, 100/140 m3/h and 90/108 m3/h - Main spindle: 5-axis, 10 kW Drive5C - Speed: 1,500 - 24,000 rpm - Tool holder: HSK 63 - Tool changer: 18 positions - Drilling head: 21 spindles, V17/H4/S0/90, 2.2 kW - Control system: powerControl PC85 - Software: WoodWOP 6.1 - Monitor: 17" TFT - Operating system: Windows XP Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2016, loading space length: 6,300 mm, loading space width: 2,260 mm, loading space height: 2,330 mm, loading space volume: 33 m³, Equipment: ABS, tail-lift, Moetefindt car transporter, box body, winch For inquiries: 1026883 * Condition: very good, first registration: 09/2016 * Permissible total weight: 3,500 kg * ABS * Winch * Tilting mechanism * Fold-out ramps for a shallow loading angle * Aluminum profile floor with transverse ribbing Hfjdpfx Aoz Rrggjh Ujn * Fastening system with countersunk holes * Recessed storage compartments in the floor Dimensions (loading area/loading platform) Loading area length: 6,300 mm Loading area width: 2,260 mm Loading area height: 2,330 mm ----Price: 27,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and Russian Typographical errors, errors, and prior sale are subject to change.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, sandwich construction Equipment: - 30mm insulated wall - Lashing rails - Aero slope Net price: €6,718.49 / Gross price: €7,995.00 Article number: TKB115301519.07 Technical data: • Brand: Vezeko • Model: TK B • Vehicle type: Box trailer Hfsdpfx Ahjyivb Us Ujn • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 305 x 152 x 193 cm • External dimensions (LxWxH): 455 x 205 x 256 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,500 kg • Unladen weight: 635 kg • Payload: 865 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, sturdy, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish multiplex • Many cross members for high point load • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aerodynamic slope on side wall • Aluminum ramp • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, with three-bolt safe locking system, lockable from inside and outside • Rear frame on hot-dip galvanized steel, solidly welded • 4 lashing eyes recessed into the floor (750DaN/kg) • Slotted hole lashing rail, mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, GALVANIZED PALLET RACKS FOR OUTDOOR USE Hot-dip galvanized pallet racks for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 16.80 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 Hedpjz Rvk Aefx Ah Usfn - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 007 x upright approx. 450 cm x 110 cm, pre-assembled. - 024 x crossbar approx. 270 x 14 x 5 cm, T30. - 048 x Locking pins. - 048 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 54 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3550 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 11.20 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 05 x upright approx. 450 cm x 110 cm, pre-assembled. - 16 x crossbar approx. 270 x 14 x 5 cm, T30. - 32 x locking pins. - 32 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2450 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Hfodpsz Rvlaofx Ah Uon Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 14 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x uprights approx. 450 cm x 110 cm, pre-assembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x locking pins. - 40 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2.990,00 € net plus legally valid VAT. Hsdpfxoz Ru E So Ah Ujfn You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Some of the technical specifications on the nameplate are damaged and not completely clearly legible. Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Repair of existing vibration testing systems Supply of replacement and assembly components Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Hodjz Iqh Ajpfx Ah Usfn Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No warranty for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik.   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed.   Technical data:   Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Hfodpfez Iqigox Ah Uon Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type T 35 – CE Version ----- Working width: 3000 mm Working height: 2000 mm Manufacturer’s Technical Description: Item 1 00001931 S&S FRAME PRESS, Type T 35 Item 2 00003701 Medium-pressure beam with double-acting pressure cylinder, weight compensation, pressure hose, and shut-off valve, up to 2000 mm high Sturdy welded frame construction made of thick-walled special hollow sections; sliding carriage and pressure beam with 50 mm hole spacing. Continuous abutment on the left side for wide-span compaction; lower abutment in 2 levels. Vertical press cylinders mounted on special pressure beams with one-hand quick adjustment and weight compensation, height-adjustable in 50-mm hole spacing. Long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing-mounted carriage with central locking, secured in 50-mm hole spacing. Upper horizontal press cylinder is infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering holes for the two abutment levels, without weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 60 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick adjustment, 2 horizontal pressure cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 130 bar, corresponding to 550 to 3,500 kg of vertical pressing force. Equipped with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Painted in RAL 7035 light gray with RAL 7016 anthracite gray. ----- Price of the above machine available upon request! ----- ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment including a beveling device, counter profiles for single-part production, and much more! Request the complete price list from us! Hjdpod Ih H Nsfx Ah Usfn ----- (Technical data according to the manufacturer, subject to change; the illustration may show optional equipment!)

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Hedpswgc I Rofx Ah Ujfn Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Hfjdpfswwmkdsx Ah Usn Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... Hsdpfx Ahjz Sypfo Uofn We will be happy to help you with the realization of your projects, from planning to ordering to assembly.