Used Homag Weeke for sale (482)

Condition: good (used), Machining center HOMAG BAZ 723 58/18/FC 4-axis CNC portal machine with 2 moving tables and edge banding unit Godpfxsxc Ir Rs Ag Sjuh

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Guedpsxnb Uvsfx Ag Ssh Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: ready for operation (used), machine/vehicle number: 0-200-03-8334, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 24 m/min, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC Gjdpfx Asydiymeg Seuh End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Cabinet length: from 250 to 2500 mm Cabinet depth: from 250 to 700 mm Godpfxozphrke Ag Sjuh Cabinet height: from 150 to 1400 mm Working height: 300 mm Pressing pressure (fixed): max. 15 kN Positioning speed (fixed): 25 mm/s Transport interface: no Control: via contactors/protection devices Weight: approx. 2.2 t

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 Gsdezkmrfepfx Ag Ssuh With loading system

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Gedpfxoy In Ave Ag Ssuh Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Godpfxsy In Dgo Ag Seuh Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Gedpfezq Ab Nox Ag Seuh Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Gujdpfxey Uv Ums Ag Ssh Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: P260713248, 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 The HOMAG VENTURE 115M is a high-performance, 5-axis CNC machining center designed for the precision machining of wood, wood-based panels, and similar materials. Its robust moving-gantry construction delivers outstanding rigidity, accuracy, and productivity for complex machining operations. 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • 10 kW DRIVE5CS 5-axis spindle (8 kW continuous), 1,500–24,000 rpm. • A-axis: ±100°, C-axis: ±361°. • HSK F63 automatic tool interface with liquid-cooled spindle. • Suitable for milling, drilling, sawing, and true 3D machining. 𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗔𝗿𝗲𝗮 Godpfx Agezmgkme Sjuh • X: 3,100 mm • Y: 1,250 / 1,415 mm • Maximum workpiece thickness: 160 mm • Clearance height: 260 mm 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 • 12-spindle vertical drilling unit. • Horizontal drilling: 4 spindles (X) + 2 spindles (Y). • Automatic 90° grooving saw. • 21 automatic tool positions (14 rear + 7 side magazine). 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗛𝗮𝗻𝗱𝗹𝗶𝗻𝗴 • Vacuum console table with LED positioning. • Divided vacuum zones for pendulum processing. • Pneumatic stops and adjustable vacuum consoles. 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 & 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 • HOMAG powerControl with 21.5" Full HD multi-touch display. • woodWOP CNC software with integrated 3D visualization. • Professional CAD/CAM package supporting DXF, STEP, and IGES. 𝗦𝗮𝗳𝗲𝘁𝘆 & 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 • CE compliant with bumper protection and laser safety scanner. • EcoPlus energy-saving mode and remote diagnostics via TeleserviceNet. 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Furniture manufacturing, doors, windows, architectural millwork, solid wood components, interior fit-out, and complex 3D machining.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Gedpfx Agszmglkj Souh Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: good (used), Year of construction: 2000, The lock case unit has a cutter holder for the faceplate on one side and a holder for the lock case cutter on the other side. € 800 Then we have a corner notching unit that produces the best results for sharp corners. We are selling the unit with the tool here. It was used very little. € 800 Gjdpfx Aevvr R Ieg Ssuh We also have some very good diametrical cutters... And 2 planing heads from Weinig for a 4-side planer 130 x 125 mm € 300 per head

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Gsdeyic Tuopfx Ag Souh Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, controller model: POWER CONTROL PC22, rotational speed (max.): 12,000 rpm, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Glue Application Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Rough top and bottom flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough machining: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Gedsyqx U Hjpfx Ag Seuh Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Wide belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Gjdpfeyghwcox Ag Ssuh HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-201-76-6720, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) LED position display system 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop Gsdpfx Agsxw H Tce Seuh 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin WoodWop CAM plugin Professional Machine WoodMotion

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Guedpfx Ageyttf Ss Seh Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table Gjdpfx Agsb Uhpfe Souh -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

Condition: used, Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander Gjdpfx Agsb Uhvlj Souh -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm -Weight: 292 kg/piece

Condition: good (used), Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083015404 -Number: 6x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.29 kg Gedpfxecczk Ie Ag Ssuh

Condition: good (used), Power supply, control board, input board, control unit, edgebander, edgebander Godpfscczk Nsx Ag Seuh Manufacturer: Homag Homematic -Type: 2Type: 2083027006 -Number: 5 tax cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.34 kg

Condition: good (used), Control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083015405 -Number: 1x tax card available Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.35 kg Gusdpfxocczk Ro Ag Ssh

Condition: good (used), Interface, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC Gjdpfx Agocczk Sj Ssuh -Type: PC control output card -Number: 2 tax cards available -Price: per piece -Dimensions: 30/195/H265 mm -Weight: 0.29 kg

Condition: good (used), Interface, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083016902 -Number: 3x control cards available -Price: per piece Gusdpfx Aocczlasg Sjh -Dimensions: 20/195/H265 mm -Weight: 0.23 kg

Condition: good (used), Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083018100 Gusdpfxjcc Aqaj Ag Ssh -Number: 4x control cards available -Price: per piece -Dimensions: 135/65/H200 mm -Weight: 0.34 kg