Used Hose Crimp for sale (2,532)

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, pneumatic cleaning, movable collection container, automatic fire extinguishing system Bdedszzn Iijpfx Agkei ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, Bdsdpfx Agjz Snbcokei self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 45 m³, Year of construction: 2026, Equipment: ABS, Chassis material: Aluminum Fifth wheel coupling, kingpin: National (t) 12 Axle load: National (t) 8 Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1175 Chassis width (mm): 1400 Loading width (mm): 2475 Internal height, front (mm) (IHF): 2165 Internal height, rear (mm) (IHB): 2165 Loading length (mm): 8486 Bsdo Agxxyopfx Agksdi Overall width (mm): 2550 Wheelbase (mm) (WB): 5800 Overall length: 10,300 Axles, brakes, and suspension Axles: JOST Brake type: Disc brake Brake type: JOST - DCA-T7 (Knorr Bremse) Offset (ET): 120 Option: 1st axle with lift axle and starting aid Starting aid activation: Via button in the truck and by pressing the brake pedal three times Brake pad wear indicator: Connected Air suspension: ECAS with lifting and lowering valve European Palm coupling Type: Smartboard Standard Air and electrical console: Centrally mounted on the driver's side As a steel gear support winch, type Weweler, with compensating springs, single-sided operation, and 2 speed stages Tire size: 385/65R22.5 Tire pressure monitoring: Wabco Trailerpulse Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nuts: Open Wheel nut covers: Chrome with STAS Manufacturer: Lighting ECOLED III - with STAS logo Work lights (operated via switch): With Position of work lights (operated via switch): 2 pcs. LED rear work lights (controlled via reverse signal) Operation: Underrun protection - Manually Towing eye: 1 pc. on the left Splash guard: Underrun protection - Black with STAS logo, mounted across the entire width of the underrun protection Cover: Underrun protection - With covers Handle: Underrun protection - Handle Hydraulics Manufacturer: Tipping cylinder - Edbro Type: Tipping cylinder - Hydraulic cylinder with small housing Cylinder tipping angle: Normal ±47° Model: Tipping cylinder - Edbro - CS18 Stroke: Tipping cylinder: 6733 Tipping cylinder max. pressure: 190 Surface treatment of the cylinder stages: Standard surface treatment Hydraulic coupling: Size 1 Hydraulic coupling: Gender - Female Hydraulic coupling: Hose 2,500 mm Suspension of the hydraulic hose with springs: Yes Number of splash guards on the fender: 2 pcs. Type: Splash guard - Fender - Asphalt Toolbox: In front of the axles, plastic Dimensions: Toolbox - Right in front of the axles: 860x520x500 Aluminum extension ladder: 3 m - right Mounting: Extension ladder for rear access - With hooks for hanging Position: Broom and shovel holder - With 3 holders each, mounted on the chassis on the driver's side Plastic shims: With two plastic shims incl. holder Anchoring device: Chassis - Superstructure Inclination: Front wall (°): 20 Inclination: Rear wall (°): 20 Inclination of the lower profile inside (°): 45 Front wall: 4 mm (Aluminum) Profile: Side wall - 3 mm - 2 mm, smooth design inside and outside, double-walled profiles 600 mm wide - 30 mm thick Floor: 8 mm Aluminum - 110 Brinell Position: Rubber pads - Rubber pads attached below the floor crossbeams Rear door Rear wall: Type - Hinged flap Rear wall: Aluminum Type of hinged flap: Straight design with planks Type of hinges: With double door hinge (double-joint hinge) Sliders: Rectangular design, standard Slider position: 1 slider, with operating handle, in the center on the driver's side Fastening of the open door flap: Door latch for hinged flap, positioned on the right on the driver's side Sealing: Rear wall - With rubber sealing completely around (LL sealing) Rotating locks: 4 toggle locks (left, right and 2x bottom) A

Condition: used, mileage: 6,76,000 km, power: 331 kW (450.03 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes Antos 2545 6x2 milk tanker, Euro 6, automatic transmission, leaf spring/air suspension, lift/steer axle, long-distance cab with 1 bunk, wheelbase 4.20m, body by abo-Magyar V1000, stainless steel 1.4301, capacity 16,500L, 3-chamber (5500L/5500L/5500L), ejector vacuum system with milk transfer pump, measuring system V1000, suction hose 5m DN50, maximum transfer rate approx. 60,000 l/h, 1 level probe per chamber, Bartec double sampler for sample collection, round container system type abo Magyar (total sample and cooling by Waeco), CIP cleaning acceptance system/CIP cleaning tank, Bartetc MAK 3002 Plus data acquisition system, Webasto heater type AIRTOP 3900, reversing camera, air conditioning, radio/AUX, heated seats, sunroof, ECE Bede Agx E Ujpfx Agkedi Tank manufactured in 2015 First owner Service booklet/inspection book

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") Bsdsz Rzh Hspfx Agksdi • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: FANUC, controller model: 21i-MB, total height: 3,100 mm, total width: 2,500 mm, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, product length (max.): 4,300 mm, number of axes: 3, This 3-axis SPINNER MVC-1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC-1600 vertical machining centre we have for sale. Contact us for further details. • Table size: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Electrical supply: 3/PE ~ 400 V, 50/60 Hz • Rated current: 50 A • Machine dimensions: approx. 4.3 × 2.5 × 3.1 m • Operational status: dismantled, not under power Additional equipment • E.A.-tronic Super 3 central lubrication unit • Habor heat pipe heat exchanger (Model HPM-35AR) • Coolant hoses/piping system installed Bedpfx Agoz Rzqnokjdi Technical Specification Taper Size SK 40

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: Bjdpfxez N Shuo Agksdi 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Condition: used, maximum load weight: 29,720 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2026, next inspection (TÜV): 10/2027, Bottom loading and top loading for gasoline, diesel, heating oil, etc. Saddle plate height 1200mm unloaded. Metering system: as per GMV with additional venting, meter DN 100 / 1,000 l/min, manufacturer Sening, with full-hose valve. 1 measured outlet. Emptying hose, cylindrical shape, separate parallel tank, material: light metal, 0.5 bar test pressure. 5, 5.0 mm minimum wall thickness, head 5 mm, bottom 7.5 mm. 5 Chamber 1 with sloped bottom plate, discharge slope towards the rear (wedge). 5 3 chambers, approx. 38,500 l gross, distribution from front: 13,300 / 6,000 / 19,200 liters gross. 5 Total filling volume approx. 36,200 l net, max. filling volumes: 12,500 / 5,500 / 18,200 liters (= max. filling volumes for bottom loading according to VOC. The actual usable filling volume also depends on the permissible axle loads and the permissible total weight!). 5 Baffle plates as required. 5 Discharge slope controlled by actuating the air suspension during discharge. Lifting loops at the front and rear of the tank to upright the partially loaded tank semi-trailer. 5 Conductors (deflectors) in the chambers to dissipate static charge. 5 Supports (small tables) as bottom valve protection and for holding the filling pipe during top loading, mounted in each chamber. Walkway / ladder / folding railing: as per safety walkway on the right. 5 1 folding railing within the dome fairing, right. 5 Intermediate platforms in front of the dome covers. 5 1 access ladder at the rear right. Dome fittings: 5 per chamber: • 1 manhole cover NW 500 (EN 13317) with filling opening DN 265, recessed installation. • 1 pneumatic tilt valve with sequential control. • 1 vent pot with flame arrester. • 1 overfill protection, electric VOC version (EN 13922). Bottom fittings: « Per chamber 1 pneumatic bottom valve DN 100 (EN 13316). « 1-channel collector. Bottom loading: 5 Bottom loading cabinet on the left. • Swing flap, lockable (square lock). • Drainage channel and drainage device (front). 5 per chamber: • 1 filling coupling. • 1 electric overfill protection system (VOC) 10-pole VOC socket, acting on the land side. Unloading device: « Right side in the fitting cabinet: • Bus flap, lockable (square lock). • Drainage channel and drainage device (front). 38,500 l capacity, 3 chambers (13,300/6,000/19,200), wall thickness 5mm, tank code LGBF for low-viscosity mineral oils class 3. 1 metering system, pump 1x full-hose, discharge on the right side of the vehicle, hydraulics: 8 Hydraulic pump drive. Hydraulic hoses. Coupling plugs (supply / leak oil / return). Pneumatics: for supplying the braking system, air suspension and the tank fittings: Air tank made of aluminum. Test connections combined. Accessories: 2 fire extinguishers 6 kg in a plastic box. 2 wheel chocks. 1 changeover warning board at the rear. 3 flame symbols, foldable. 3 hazard labels “environmentally hazardous substances” (Fisch & Baum), foldable. Rear view camera, manufacturer Motec, in the upper lighting bar. Pneumatically actuated flap at the rear of the trailer. Supply of the imaging components for the tractor unit (without installation). 1 container cabinet made of light metal, rear right. Acoustic reversing buzzer at the vehicle rear. Inclination indicator (level), right. 2 grounding lugs per vehicle side. 1 aluminum hammer, right. 1 shaft hook, right. 2 pole boards, right. 2 absorbent containers with holder. Pylons with holder. Shovel and broom. Drip trays under the outlets. Shaft cover. Bodpfo Agduzex Agkodi

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. Bsdpfx Aez Ng Nyogkjdi COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Bodpfs Aa Aufsx Agkodi Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data Bdsdpfsz Sr Uysx Agkoi - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, pressure: 180 bar, empty load weight: 126 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 8/18-4C HOT-WATER PRESSURE WASHER Year of manufacture: 2023 Bdedpfoz Tqwpox Agkei The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 800 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6 Cleaning agent tank [l]: 15 Hose length [m]: 10 Weight [kg]: 126 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits Bjdpfxez Smkqe Agkjdi ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: excellent (used), Professional mobile tank for storage and distribution of diesel fuel/light heating oil from the renowned German company Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, designed for transport by forklift. The tank is equipped with a 24V electric pump from HORN GmbH and a fueling nozzle. Ideal for: • Agricultural operations • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical specifications: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III • Test pressure: 3 bar • HORN GmbH fuel pump • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum pumping height: 6 m • Suitable for diesel fuel and light heating oil • Fueling nozzle + hoses • Protective housing • Forklift-transportable • Galvanized steel construction Condition: Used item. Bdedpfx Aez Smz Ajgkji Shows normal signs of use according to age and operation. Visual condition and completeness as shown in the photos. Included: • 250L tank • 24V pump • Hoses • Fueling nozzle • Transport frame.

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, Bdodoz Sm Dqopfx Agkoi very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: new, Year of construction: 2024, Pad Printing Machine TIC PRL2C254 2-colour-machine, stand model, electro pneumatic control, closed ink system, ink cup ø: 90mm, cliché size: 2x100x250mm, incl. enlarged carré table with 10stations, the table is height-adjustable via spindle, pick-and-place station, enlarged pedestal, pad cleaning station with infinitely adjustable belt conveyor, corona generator with 1electrode (60mm), extraction unit with adjustable fan to suction the ozone at the corona device and to suction the solvents fumes at the ink cups, pad blowing system with adjustable jointed hoses, pad pressure: 168kg when 6bar. - Option: micro fine adjustement for printing of empossed printing objects, feeding station, suitable drying system, flaming station, optical registration. Bdjdpfx Agohmpm Neksi Sturdy housing made of aluminium cast, electro-pneumatic control, clear touchscreen display with modern microprocessor control, optional signal outputs for connection of peripherals. Stand models with sturdy torsion-resistant support out of steel plate with an extended downward adjustment of the feeding table to positioning of higher objects. European/Japanese pneumatic elements, low running by air sound absorbers, print parameter adjustable via display, closed ink system with register pins for magnetic fastening, ink cups with ceramic doctor ring, contact pressure adjustable via magnetic adjustment. All machines equipped with safety plates at the sides as well as emergency switch and foot switch. Needed connection: compressed air 6bar, 230V, 50cycles. Delivery time 14-16 weeks

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GH4200BD, operating pressure: 290 bar, total length: 1,200 mm, high-pressure hose length: 15,000 mm, total height: 1,250 mm, total width: 1,000 mm, pressure: 290 bar, empty load weight: 120 kg, fuel: super 95, overall weight: 125 kg, warranty duration: 24 months, fuel tank capacity: 6 l, temperature: 150 °C, The GH4200BD hot water pressure washer combines extreme power with the efficiency of hot water cleaning. Designed for demanding tasks where cold water isn’t enough, this professional machine is powered by a robust Briggs & Stratton Vanguard engine and diesel water heating system. It easily removes the toughest dirt, grease, and oil residues, making it ideal for industry, construction, agriculture, and vehicle or machinery maintenance. Key Features Max. pressure: 4200 PSI / 290 bar Max. water flow: 18 l/min Engine: Briggs & Stratton Vanguard, 408 cm³, horizontal OHV This hot water high-pressure cleaner is widely used in environments where conventional cold-water washers fall short Package Includes GH4200BD hot water petrol pressure washer Short high-pressure spray gun 15 m high-pressure hot water rubber hose with QC 3/8 Stainless steel lance extension Bdodpfx Ae Aaxzzegkei Nozzle set: 0°, 15°, 25°, 40°, detergent nozzle /029 Waspper oil Detergent suction hose User manual

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GF120, operating pressure: 220 bar, total length: 1,000 mm, high-pressure hose length: 10,000 mm, total height: 1,400 mm, total width: 700 mm, pressure: 220 bar, empty load weight: 40 kg, fuel: super 95, overall weight: 45 kg, water tank capacity: 120 l, warranty duration: 24 months, fuel tank capacity: 4 l, Petrol high-pressure washer Gaspper GF120 with 120l tank is made for the toughest dirt. With the Gaspper GF120 pressure washer, the cleaning process is very simple and pleasant, even in the case of larger surfaces. Bdodpfx Ae Aayxnogkoi Key Features Petrol Engine: Peggas AP170F, 4-stroke, OHV Power: 5.2 HP / 3.9 kW Water pressure: 220 bar / 3.200 PSI Flow rate: 2.91 GPM / 11 l/m Specific Features: Free electricity cords for prevention of short circuits in wet surroundings You can take it anywhere thanks to a gas-powered system 10 meters high-pressure rubber hose 0°, 15°, 25°, 40°, and saponite nozzle for various uses Robust and lightweight steel construction for easy handling Big wheels and high chassis so it can be moved easily even in rough terrain areas High-pressure ergonomic gun with high-quality stainless steel lance Quality Peggas petrol engine with speed control for longer life Aluminum pump with brass head, ceramic pistons, and water pressure control Wide range of accessories Customer service, warranty, and post-warranty service

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GP5000HC, operating pressure: 350 bar, total length: 1,300 mm, high-pressure hose length: 15,000 mm, total height: 800 mm, total width: 800 mm, pressure: 350 bar, empty load weight: 125 kg, fuel: super 95, overall weight: 130 kg, warranty duration: 24 months, fuel tank capacity: 6 l, Built to tackle demanding cleaning tasks across industries, the Gaspper GP5000HC high-pressure washer is a true workhorse. This powerful machine is a perfect fit for construction sites, agricultural operations, and automotive detailing. But its capabilities extend far beyond – technical service providers, municipal authorities, and construction equipment rental companies all benefit from its heavy-duty cleaning power. Key Features: Petrol Engine: Honda GX630, 4-stroke, OHV Power: 20.8 HP / 15.5 kW Water pressure: 350 bar/5.000 PSI Flow rate: 5.81 GPM / 22 l/min Package contents: High-pressure washer Pressure gun High-pressure rubber Hose 15m with QC 3/8 Stainless Steel Extension Lance Nozzle 0 ̊ Nozzle 15 ̊ Nozzle 25 ̊ Nozzle 40 ̊ Soap nozzle Waspper engine oil Detergent tube Bdsdps Aayyrefx Agksi Operation manual Wheel assembly set

Condition: used, functionality: fully functional, machine/vehicle number: 36518, mileage: 44,900 km, power: 175 kW (237.93 HP), first registration: 02/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary as some vehicles are currently in rental use! Additional similar vehicles available upon request. Right-hand drive, 6-cylinder OM 936 engine, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t, air suspension with differential lock, lane assist, Active Brake Assist, hill start assist, underrun protection, reversing warning tone, daytime running lights, rain sensor, light sensor, plastic toolbox, tank capacity: 125 l, AdBlue 8l. Bdodpey Rnk Ssfx Agksi Cab with 2 seats: driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote, immobilizer with transponder, cruise control, digital tachograph, sun visor, reversing camera. Hydraulically driven turbine, steplessly adjustable, tank made entirely of stainless steel, additional manual pump for lifting the container, weight display, operating hours counter, sweeping hours counter and water indicator (remaining volume 300 l), automatic water supply cut-off when lifting the sweeping units and when reverse gear is engaged, acoustic signal in the cab when container is raised, 2 LED beacons + 2 LED work lights, sound insulation in equipment compartment, left/right sweeper unit, dual-sided intake, dual sweeping system, sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, trailing disc brushes with steel bristles, diameter 700 mm, adjustable disc brush tilt (joystick right and left), roller brush with mixed polypropylene and steel wire bristles L=1500 mm, diameter 400 mm, disc brush spray nozzles, continuous front spray bar with 6 nozzles, 3 nozzles per disc brush, 6 nozzles in suction mouth, 5 nozzles on sweeping roller, wild weed brush type 'C' mounted on right, water system for cleaning upper suction shaft with external water connection, stainless steel leaf grid, area approx. 2 m², pneumatic lifting/lowering with vibration mechanism, turbine wheel made from 8 mm Hardox 700, housing dome made from integrated Hardox AISI 316, filling via hose with check valve, Wilden water pump, P1, diaphragm pump, dry-run safe, leaf suction system at rear, reversing camera with monitor in cab, PM 10, broom and shovel holder, cable remote control.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 49 kg, input voltage: 230 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 6/16-4M COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. Bedoy S S Nzopfx Agksdi TECHNICAL DATA: Model: HD 6/16-4M Power supply voltage [V]: 230 Discharge capacity [l/h]: 600 Operating pressure [bar]: 160 Connection power [kW]: 3.4 Weight [kg]: 49 Dimensions [mm]: 467 x 407 x 1010 Hose [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 2008, Plasma power source for plasma cutting machine Manufacturer: Kjellberg Type: HiFocus 80i Bdedjzn Hp Sepfx Agkji Year of manufacture: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Includes hose package and torch Manual gas console 31126ä

Condition: used, Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement. Bedpfxs Agwqao Agkjdi

Condition: used, Year of construction: 2002, Offered is a vacuum tube lifter with pillar-mounted jib crane. Maximum load capacity: 85kg. Weight of the lifting unit: 63.5kg. Equipped with a vacuum lifting unit, ergonomic control unit with handle, vacuum gripper, vacuum supply hose, side channel blower with filter, as well as a pillar-mounted jib crane with jib arm and movable suspension. Inspection possible by arrangement. Bsdpfxj Afpl Uj Agksdi

Year of construction: 2017, condition: used, 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, 1x Cloos GLC 451-C welding machine and 1x Cloos GLC 553/MC3 welding machine are available, 1) 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, welding current: 40-450A, welding current at 60% duty cycle: 450A/36.5V, welding current at 100% duty cycle: 350A/31.5V, open-circuit voltage: 77-98V, mains voltage: 380-480V/50Hz/3-phase, power cable: 4x6mm², mains fuse protection: 400V/32A, protection rating: IP23, insulation class: F, cooling method: F, dimensions (without wire feeder): 1011x517x703mm, weight (without wire feeder): 88kg, year of manufacture: 5x2017, 1x2016, 2) 1x Cloos GLC 451-C welding machine, year of manufacture: 2003, 3) 1x Cloos GLC 553/MC3 welding machine, year of manufacture: 2008, additionally, 21 welding torches with long torch necks, 12x500mm, 4x600mm, 5x1500mm, and 53 FKS400 Autogen Ritter welding torch hose assemblies are included, an on-site inspection is possible. Bdjdpfx Ao Afzadegkji