Used Hose for sale (2,384)

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm Bjdpfx Aewd Emwoktslp The technical data sheet can be found below the images; the operating instructions are attached.

Condition: good (used), Parker 82C 061 hose crimping machine for hoses from 1/4" to 1 1/4" (depending on the crimping dies) with 5 sets of crimping dies (colors see images). Included is an Enerpac PUJ1200E hydraulic power unit, as well as a TONE SM 210-SL hose cutter, manufactured in 03/2016. The table is also included. The equipment has been checked for proper functioning and has undergone electrical inspections, which were carried out by an electrical company. Blsdpfxez N Slme Aktsp

Condition: used, Year of construction: 1998, power: 13 kW (17.68 HP), Hose Assembly Machine Manufacturer: PARKER/POLYFLEX Type: SMM 100 Year of manufacture: 1998 The Parker Polyflex SMM100 is a specialized hose assembly machine designed for the precise assembly of thermoplastic ultra-high-pressure hose lines. A safety three-jaw chuck ensures stable clamping and reliable force transmission during the swaging of the fittings. Technical data: - Operating voltage: 400 V / 50 Hz - Power: 13 kW Condition: used, without warranty In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Blodpfx Akjzz S Ndjtjp

Condition: used, Year of construction: 2010, machine/vehicle number: Howard 1900 PLE, functionality: fully functional, operating hours: 40 h, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, total length: 5,000 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 960 kg, Equipment: CE marking, Used hose press from production conversion. The system was used for pressing or dewatering plant-based materials. On-site inspection and functional video are available upon request. • Suitable for dealers and processors in the fruit, juice, cider, or plant processing sector. Bedpfxjzuzfno Aktelp • Stainless steel trays are included in the scope of delivery. • Sale due to system or process change.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). Blodpsy Ufk Refx Aktop These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a joining unit and veneer stop table. A video of the machine in operation can be sent upon request. For cutting veneer without splintering and ensuring tight joints, including thick-cut veneer. Cutting length max. 4200 mm. Bjde Ahrgajpfx Aktelp The saw unit and joining unit are combined in a single unit, so only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with full-length finger stop, adjustable from approx. 2 - 50 cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2 kW. Fine-tooth blade with carbide inserts, sharpened. Joining blade with PCD inserts, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80 mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. On-board tools. Saw blade and secondary cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600 mm (L x W x H). Weight approx. 800 kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this supplier."

Year of construction: 2020, condition: used, functionality: fully functional, Unused Suction and Discharge Hose – 63 / 70 / 80 / 90 / 100 / 127 mm Blsdoz Er Skepfx Aktsp For sale: 13 rolls of new and unused heavy-duty suction and discharge hose in various diameters. Durable green suction and discharge hose, suitable for pumping and transporting water and other compatible liquids. The hose has a thick wall and is reinforced, and can be used on both the suction and discharge sides of pump systems. Available diameters: 63 mm / 70 mm / 80 mm / 90 mm / 100 mm / 127 mm Total quantity: 13 rolls Condition: New / unused Type: Reinforced suction and discharge hose Color: Green Quantity: 13 rolls in various sizes Suitable for water pumps, irrigation systems, agriculture, construction, industry, drainage, and various temporary or permanent pumping systems. Collection from VADO Technische Groothandel in Uden, The Netherlands. Price EXW Uden – transport costs are not included. Shipping can be arranged; please inquire about transport costs in advance. We also have various other sizes and types of hoses, pumps, couplings, and installation materials in stock.

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit Bjdpfez Smt Ejx Aktelp ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured

Condition: used, Year of construction: 2010, functionality: fully functional, Used hydraulic hose cutting machine, fully functional and currently in use. Can be inspected on site. Bledpfx Ajzphrqoktep

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. Blsdpfjz Smtrjx Aktsp ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: used, functionality: fully functional, Year of construction: 2005, Tone Hose Stripping Machine RI 180 Blodpoxwvf Isfx Aktep - tested - includes accessories DN 6, 8, 10, 13, 16, 25, 32, 40 - shipping possible for an additional charge

Year of construction: 2024, condition: new, functionality: fully functional, Protective cable conduits, electrical installation hoses from Pipelife at a special price. FXP20 (KUP) Total quantity: 9,000 m (180 bundles) Item number: KU-P-AS-E-MF-LSZH 20 Packaging: 50 m per bundle FXP40 (KUP) Total quantity: 6,300 m (252 bundles) Item number: KU-P-AS-E-MF-LSZH 40 Packaging: 25 m per bundle FXP25 UV (RPE) Total quantity: 11,200 m (224 bundles) Item number: RP-E-SF-UV 25 Diameter: 25 mm Packaging: 50 m per bundle Special feature: cable protection conduit with additional UV protection FXP50 UV (RPE) Total quantity: 6,000 m (240 bundles) Item number: RP-E-SF-UV 50 Diameter: 50 mm Packaging: 25 m per bundle Special feature: cable protection conduit with additional UV protection All items are available for immediate delivery. Partial orders are also possible. Bsdpfxswtfiwj Aktolp

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw Bodpfx Akjz Afhpotslp - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: new, Heated high-pressure hose (with integrated control / sensor unit). Bjdpfxe Afdzqs Aktslp

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), overall weight: 12,000 kg, fuel type: diesel, color: yellow, fuel: diesel, gearing type: automatic, emission class: euro4, loading space width: 2,550 mm, loading space length: 5,150 mm, loading space height: 3,100 mm, Year of construction: 2012, operating hours: 6,790 h, machine/vehicle number: 17.55.856, Backhus 17.55 windrow turner together with Backhus Hose Drum HD 63 for sale. The 17.55 Machine is fully equipped in great and working condition. Manufactured in 2012 and 6790 operating hours. The machine is sold together with the Backhus Hose Drum HD63 with 200 m long hose (Drum has never been used) which can be connected to the machine for spraying the compost rows. The HD 63 drum is operated automatically via the Bachus 17.55. On demand we can send aditional pictures. For further information please contact us. Blsdsxmvlyspfx Aktjp

Condition: used, New: Yes Bedpfxez S Dipo Aktjlp Attachment suited for: Agricultural machines

Condition: used, New: No Blsdpsz S A Scofx Aktsp Year of construction: 2000 Attachment suited for: Agricultural machines

Year of construction: 2025, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2025. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It is offered with a 6-month warranty on all electrical components. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible choice of delivery or self-collection Competent advice - before and after purchase Provision of operating manuals, wiring diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: 635 x 750 x 1470 mm (2050 mm) Basket size: 500 x 500 mm Clearance height: 440 mm Program cycle time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/rinse cycle Total connected load: 10.7 kW Fuse rating: 19.5 A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Washing pump: 0.75 kW / 4.60 A Machine protection rating: IP X4 Serial number: 10640578 Year of manufacture: 2025 Condition: Used, inspected and fully functional Your advantages: Simple operation thanks to clear and easy-to-understand symbols Digital temperature displays for washing and rinsing water Bjdpfx Aks Ahnmkstelp 3 program cycle times Eco-filter system for the best cleaning result thanks to warmer and filtered tank water Machine and hood double-walled – ideal thermal and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent washing time extension – hygiene safety under all operating conditions Washing and rinsing systems made of stainless steel Hood start-up automatic Including lye pump, pressure booster pump and rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Further details: Rack dishwasher Structure and interior made of CrNi steel 18/10 or high-quality, corrosion-resistant materials Deep-drawn tank with easy-to-clean curves Tank and hood double-walled insulated Hood with CrNi hood handle can be opened upwards on three sides Hood start-up automatic (program start by pressing down the hood handle) CrNi rotary arm washing and rinsing systems CrNi tank cover sieve for coarse contaminants Sloping roof with an internally running water channel Supply lines outside the washing chamber Eco-filter system for the best cleaning results and the lowest cleaning effort Fully electronic control with operator display Digital temperature display for washing and rinsing water Self-cleaning program Pressureless stainless steel boiler Connection possible to the left or right Connection set, consisting of supply and drain hose and electrical cable (each 1.6 m from the machine) Wall connection profile to the rear Noise level: 65 dB(A) Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket base equipment: 1 universal basket VKV 50/1 Subject to change and errors.

Condition: excellent (used), Condition: used, shows normal signs of use, fully operational Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 The set includes: 2x Vetter air lifting bag Type 1/6 complete set of air hoses (yellow + red) quick couplings carrying bag the set exactly as shown in the photos ⚙️ Technical specifications: Model: Type 1/6 Maximum lifting capacity: approx. 3.2 t (32 kN) – each bag Max. operating pressure: 0.5 bar Volume: approx. 403 L Air requirement: approx. 603 L Hoses: DN 19 mm working pressure 1 bar (14.5 PSI) Bodpez Smv Tofx Aktslp ISO standard 🛠️ Applications: technical rescue (fire department) lifting of vehicles and machinery workshops and industry maintenance and emergency operations 📌 Additional information: renowned German manufacturer – Vetter complete set, ready for immediate operation solid, durable construction fast and safe lifting of heavy elements sold as shown in the photos

Condition: excellent (used), Condition: used, with normal signs of use, fully functional Manufacturer: Vetter (Germany) Country of manufacture: Germany Bljdpfx Asz Smv Hoktop 📦 Set includes: Vetter air lifting bag air hoses with quick couplings transport bag complete set as shown in the photos ⚙️ Technical data: Model: Type 1/13 (VSM 14) Max. lifting force: 65 kN (approx. 7.2 tons) Max. working pressure: 1 bar (14.5 PSI) Nominal capacity: 403 L Air requirement: 806 L Year of manufacture: 2018 🛠️ Applications: technical rescue (fire brigade) lifting of machinery and vehicles service and industrial work emergency situations 📌 Additional information: equipment from a reputable German manufacturer robust and durable construction fast and safe lifting of heavy items sold exactly as shown in the pictures

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Bjdpfjwuqfyjx Aktjlp Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Year of construction: 1979, condition: good (used), Hydraulic hose press, crimping tool, crimping machine, crimping jaws, crimping tool, hose press Bsdpfozbirksx Aktelp -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Condition: good (used), Year of construction: 2014, ITW Dynatec Hot Melt Glue Pump Complete with two heated hoses, modules, guns and nozzles 240 Volts 7200 Watts 50 / 60 HZ Bljdpsurf T Dofx Aktsp In good working condition

Year of construction: 2005, condition: used, stable hose reel for tough and extremely challenging applications stable durable and extremely corrosion-resistant for air, water (oil and grease) diameter of hose connection 12.5 mm (1/2 ") hose length max. 20 m possible open version housing made of cast aluminium, lacquered in space-blue  hose drum ball bearing mounted made of cast aluminium, lacquered in space-blue  can be mounted either on wall, floor or ceiling safety lock for hose drum drum bearing encapsulated Bjdpfx Aksh A Sflotjlp drum locking mechanism sixfold rotary transmission made of brass oder brass / stainless steel  hose stop included in scope of delivery  hose outlet via 6 rolls, steplessly adjustable spring drive encapsulated max. pressure: 1.5 MPa (15 bar) hose connections: sppit with hose clamp with rubber hose, cord reinforced temperature max. 80° C space requirements depth - 760 x height - 560 x width - 320 mm weight approx.  32 kg original price approx. ? 1,600.00  - 9 units on stock -

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, MORI SEIKI NHX 4000 CNC Horizontal Machining Center with Pallet Changer General Machine Data Manufacturer: MORI SEIKI Model: NHX 4000 Year of Construction: 2012 Control System: Siemens Sinumerik 840D solutionline with SLIMline operator panel Machine Type: CNC Horizontal Machining Center Number of Axes: 4 (X, Y, Z, B) Travel and Feed Rates X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm B-axis: 360° NC rotary table Bodpfx Ae Agn Tloktjlp Rapid Traverse X/Y/Z: 60 m/min Maximum Feed Rate: 60,000 mm/min Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Interface: HSK-A63 Spindle Power: Dependent on the installed spindle version Internal Coolant Supply (ICS) through the Spindle Tool Changer Automatic Tool Changer Tool Interface: HSK-A63 Tool Magazine: 40 positions Maximum Tool Diameter: approx. 70 mm Maximum Tool Diameter with Free Adjacent Positions: approx. 170 mm Maximum Tool Length: approx. 450 mm Maximum Tool Weight: approx. 8 kg Work Table and Pallet Changer Automatic 2-position Pallet Changer Pallet Size: 400 × 400 mm Maximum Pallet Load: approx. 400 kg Maximum Workpiece Diameter: approx. 630 mm Maximum Workpiece Height: approx. 880 mm B-axis: 360° Equipment Siemens Sinumerik 840D solutionline SLIMline operator panel HSK-A63 main spindle with 12,000 rpm Automatic Tool Changer Automatic 2-position Pallet Changer NC rotary table / B-axis Internal Coolant Supply (ICS) Chip Conveyor Coolant System Machine Dimensions and Weight Length: approx. 4,214 mm Width: approx. 2,720 mm Height: approx. 2,512 mm Machine Weight: approx. 8,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Spindle hours: 39,000