Used Hurco Bmc 4020 Ht for sale (157)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Hurco VMX42t was manufactured in 2007. It features an X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1270 x 610 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42t vertical machining centre we have for sale. Contact us for further details. Hjdpfszwgztjx Airsw - Control System: Ultimax- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 15 KVA- Full Load: 30 KVA- Interrupt Capacity: 10,000 AMPS- Optional Equipment: Chip conveyor, Simulation graphics, Tool and material library, Pocket milling with island, Synchronous thread cutting without compensating chuck, High-pressure through-spindle coolant

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces 35x72) Coolant system adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter at full capacity: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm Hsdpfszka Hiex Airsw T-slots in table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hrs Spindle hours: approx. 5,000 hrs The following items are not included in the scope of delivery: vices, tools, extraction system, tool cart. Further technical data can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 2008, A vertical 3-axis machining center by Hurco is offered, including spindle through-coolant, 3D Tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool stations: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment. Hedpfxjzghfxo Airsw

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 2,800 mm, table load: 1,500 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 7,000 g, This 3-axis Hurco VMX42T vertical machining center was manufactured in 2007. It features a robust table size of 1,270 × 610 mm, supporting a maximum load of 1,500 kg. Equipped with a high-speed spindle capable of up to 12,000 rpm and a BT40 taper, it ensures efficient machining. The machine includes a 24-tool automatic changer and rapid traverse rates of 24 m/min. Contact us for more information about this machine. • Table: • Size: 1,270 × 610 mm Hsdpfx Ajz Hxpljirsw • Spindle: • Lubrication: Grease-lubricated • Through-spindle coolant (CTS): optional • Feed rates: • Cutting feed: up to 20 m/min • Tool changer: • Type: Automatic carousel • Accuracy: • Positioning: ±0.005 mm • Repeatability: ±0.003 mm • Control: • Hurco WinMax CNC • Display: Dual 19" touchscreen Dimensions Machine Depth 2800 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Travel X-axis approx.: 1,524 mm Travel Y-axis approx.: 660 mm Travel Z-axis approx.: 610 mm Table size approx.: 1,676 x 660 mm Table load approx.: 1,500 kg Tool changer: 24 positions Tool holder: SK 40 Spindle speed: 12,000 rpm ICS 20 bar 3D probe: Renishaw Network interface Electronic handwheel Pocket milling with islands Synchronous tapping DXF software Hsdpfx Aijy R A Swjrsw Scraper belt conveyor * Spindle hours approx. 1,937 (spindle replacement 2019) * Approx. single-shift operation

Condition: used, Year of construction: 2003, MACHINING CENTER HURCO VMX 42 YEAR: 2003 CNC: HURCO UltiMAX 4 Hedpjyup Urefx Airjw Table: 1,270 x 610 mm Travels: X axis: 1,070 mm Y axis: 610 mm Z axis: 610 mm Spindle: ISO 40 DIN 69871 Speed: 10,000 rpm Power: 18 kW Tool magazine: 24 stations Complete with chip conveyor Assorted tool holders included

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Hedpfxow Dfhzo Airsw

Condition: used, A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment. Hodpoz Hzd Sefx Airow

Condition: good (used), Year of construction: 2016, HURCO CNC Machining Centre VMX 24 i Travels X-axis (mm): 610 Y-axis (mm): 508 Z-axis (mm): 610 Main Spindle Spindle taper (DIN 69871): SK 40 Max. spindle speed (rpm): 12,000 Max. spindle power (kW): 9 Hsdpoxvtihefx Airow Max. spindle torque (Nm): 95 Feed Rapid traverse X/Y/Z-axis (m/min): 38 / 38 / 32 Tool Changer Magazine positions / optional: 30 Max. tool diameter (mm): 80 Max. tool length (mm): 300 Max. tool weight (kg): 7 Additional Data Required installation space (mm) (doors open, incl. control unit and chip conveyor): 3,930 x 4,041 x 2,725 Machine weight (kg): 4,750 Coolant tank capacity (l): 367 Scraper belt conveyor: Standard Technical specifications subject to change without prior notice.

Condition: ready for operation (used), Year of construction: 2019, Make: HURCO Type of machine: VMX42i Year of manufacture: 2019 Control system: Hurco WinMax Tool holder: SK40 x-travel: 1.067 mm y-travel: 610 mm Hjdpfeyc Sn Rsx Airew z-travel: 610 mm Speed range: 12.000 U/min max. Table load: 1.000 kg Table dimensions: 1.270 × 610 mm Number of tools in the magazine: 24

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm Hsdpszaprzsfx Airew MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: used, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,020 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: HURCO Model: VMX 40 Technical Data: Hedpjzaf Ixofx Airew - X-axis travel: 1,020 mm - Y-axis travel: 510 mm - Z-axis travel: 610 mm - Table size: 1,020 x 610 mm - Spindle speed: 10,000 rpm - Spindle taper: SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2014, Controller WIMNAX V09 (DSM) Table size 2184 x 865 mm T-slots in table 7 x 18 x 125 mm Table load max. 2268 kgs X travel 2134 mm Y travel 864 mm Z travel 762 mm Spindle speed 12000 rpm Spindle power 18 kW Tool holder type SK40 Hodpspiaqxsfx Airew ATC magazin 40-fold Max tool dia. 74.9 mm Max tool length 300 mm Max tool weight 7 kgs Rapid speeds X/Y/Z = 18, 18, 13.5 m/min Weight 17000 kgs Dimensions LxWxH = 7570 x 4450 x 3260 mm Accessories, features - Coolant device - DXF, NCPP, ISNC, Herical, rigid tapping, pocket/islands options - CTS 20 bar - Spindle cooler - Chip conveyors - Manuals Very good condition. Ready to sale immediately. The tools are not in with the machine.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader. Machine comes with 3 jaw Hedpfx Aeydqpioirjw chuck, tool set arm, chip conveyor and single piece extraction.

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 640 mm, Ultimax control BT 40 spindle, new in 2020 Hedoxu Ikqspfx Airsw speed 10,000 rpm travels 1270X660X640 mm 24-tool changer chip conveyor

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Hedpfxszguhyo Airew Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months Hjdpfezu Nz Dex Airsw - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: excellent (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Hsdezwhlajpfx Airow Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: good (used), Year of construction: 2010, HURCO CNC Machining Center VMX 30 U with WinMax control Travel distances in mm: X-axis 1060 Y-axis 610 Z-axis 520 Integrated rotary and swivel axis: Coolant system Rinsing system to support chip removal Chip splash-guard enclosure Coolant spray gun Signal light for machine operating status Work area machine lamp Set of leveling pads Machine manual on CD includes: WinMax control 2 color screens (text + graphics) 2 software modules (1 x conversational programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system through RS-232 C or V 24 interface) Hsdpfxsxvtf As Airew

Condition: good (used), Year of construction: 2011, HURCO CNC machining center VMX 60 t X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer, 24 positions Equipped with WinMax control Includes: Internal coolant system (IKZ) Spindle cooler Coolant spray gun Chip splash guard cabin Hsdpfx Aisxvtfperow Signal light for machine operating status Flushing system to assist with chip removal Machine lamp Set of machine leveling pads Machine manual on CD 2 color screens (text + graphics) Simulation graphics Tool and material library Detachable electronic handwheel Pocket milling with islands Synchronous tapping (thread cutting without compensating chuck)

Condition: used, Year of construction: 2001, BAZ Hurco VMX 40, year 2001 for sale in very good condition. Hedoy Nlpcjpfx Airsw

Condition: ready for operation (used), Year of construction: 2006, Offered is a Hurco CNC vertical machining center including spare parts. Travel X/Y/Z: 1270mm/660mm/610mm, table dimensions X/Y: 1500mm/660mm, max. table load: approx. 1360kg, spindle speed: 10000rpm, spindle taper: SK40, main drive power: approx. 18.5kW, tool pockets: 24, feed X/Y/Z: 30m/min, feed Z: 20m/min, rapid traverse X/Y: 30m/min, rapid traverse Z: 20m/min, spindle operating hours counter: approx. 7676h, control: Hurco Ultimax. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, machine weight: approx. 9000kg. Inspection possible by arrangement. Hedpfx Aiozkvmfsrew

Condition: ready for operation (used), Year of construction: 2003, X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible. Hjdpfeza E Ryex Airjw

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine. Hjdpfxjygmtvj Airjw • Table size: 1,670 x 660 mm • Tool turret: 24 positions Additional equipment • Various tools • Chip evacuator Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 660 mm, table length: 1,670 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm. Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Tool turret 24 positions Hodpfx Aoyi Ekxjirsw • Equipment various tools • Accessories chip evacuator