Used Hurco Vmx 50 for sale (157)

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Pjdpfx Ask Iugzebhjpu

Condition: used, Year of construction: 2006, Hurco VMX 42 i, Year of manufacture: 2006, Control system: Ultimax 4, Travel range X/Y/Z: 1060/610/610 mm, Tool changer: 40 positions, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Chip conveyor, Internal coolant system (IKZ), Psdpfezg E Nuex Abhjpu X and Y axes have slight play.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,067 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Number of axes: 3 Spindle speed: 12,000 rpm Drive power: 12 kW Torque: 237 Nm Ppodpfjzapr Ujx Abhsu Table size, X-axis: 1,270 mm Table size, Y-axis: 610 mm MACHINE DETAILS Number of tools in the magazine: 30 Tool holder: SK40 Operating hours: 12,000 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Pedpfx Abszaprzshspu Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 Ppodpfx Aoy Tzc Hsbheu - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY Psdpsy Tzctsfx Abhjpu - Supply voltage : 400 [V] - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] EQUIPMENT - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Ppodpjzam E Eefx Abhsu Removable handwheel

Condition: used, x-travel 1.020 mm y-travel 510 mm z-travel 610 mm surface area 1.020 x 610 mm Ppedpfx Ajzaf Ixsbhou spindle tunring speed 10.000 U/min spindle taper SK 40 In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin Podeu Iddnopfx Abhopu incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: excellent (used), Year of construction: 2007, Ultimax 4 control system Travel ranges X/Y/Z: 610 x 510 x 610 mm Table size: 760 x 510 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Chip removal system Ppodpfx Abey U Rzuehsu

Condition: excellent (used), Year of construction: 2015, Control Winmax Travel paths X/Y/Z 2135 x 865 x 762 mm Spindle speed 12,000 rpm Tool magazine for 40 tools, SK 40 Handwheel Ultimotion ICS 40 bar Ppsdpey U Hdrefx Abhou Renishaw probe Chip conveyor

Condition: used, Year of construction: 2006, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: WINMAX, Hurco VMX 24S – Vertical CNC machining center – Year of manufacture 2006 – WINMAX control For sale is a Hurco VMX 24S vertical CNC machining center, manufactured in 2006, equipped with the user-friendly Hurco WINMAX CNC control. Technical data / Equipment: Manufacturer: Hurco Type: VMX 24S Year of manufacture: 2006 Control: Hurco WINMAX Machine type: Vertical CNC machining center Travel in X-axis: approx. 610 mm Travel in Y-axis: approx. 510 mm Travel in Z-axis: approx. 610 mm Spindle speed: 15,000 rpm Ppedszdkt Tjpfx Abheu Spindle taper: SK 40 Internal cooling: 30 bar Tool changer: 24 tool positions Operating hours: approx. 34,000 hours Machine weight: approx. 5,000 kg Condition: used Availability: by arrangement Description: The Hurco VMX 24S is a proven vertical CNC machining center with a solid machine structure and a very user-friendly WINMAX control. The machine features a 15,000 rpm spindle, SK 40 tool taper, 30 bar internal cooling, and a 24-position tool changer. With approximately 34,000 operating hours, the machine is in used condition, reflecting its year of manufacture. It is particularly suitable for flexible manufacturing tasks, single parts, small series, toolmaking, and mold making. The Hurco WINMAX control enables quick and easy program creation directly on the machine. The machine can be inspected by arrangement. We will gladly provide further technical data, images, or videos upon request. Note: Please check the technical data, equipment, and accessories before completing the purchase. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light Ppedpoy Tw R Hsfx Abheu • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system Pedpfx Abey Tw Ryohopu Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2002, x-travel 1.060 mm y-travel 610 mm z-travel 610 mm control Winmax 9 (Upgrade) table-size 1.270 x 610 mm max. table load 1.100 kg number of T-slots 5 T-slot - width 18 mm T-slot - distance 100 mm turning speed range - milling ~ 10.000 U/min power capacity - milling spindle 18 / 11 kW tool taper SK 40 Tool changer 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool length 300 mm max. tool weight 7 kg feed ~ 15,4 m/min rapid traverse X-axis 30 m/min rapid traverse Y-axis 30 m/min rapid traverse Z-axis 20 m/min Pjdpfx Abjx R Enhehjpu weight of the machine ca. 7,0 t dimensions of the machine ca. 3,5 x 3,2 x 3 m Machining Center - Vertical HURCO VMX 42

Condition: ready for operation (used), Year of construction: 2003, X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible. Ppodpjza E Ryefx Abheu

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,050 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details. • Operating hours: 2,050 h Ppsdpfx Aoy Nab Hjbhou Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h Pedey Naacjpfx Abhspu • The machine is equipped with a 30-tool magazine, and it also includes a chip conveyor and tool cooling system. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,398 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 750 kg, overall weight: 4,800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30i was manufactured in 2017. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 15 kW, providing efficient machining capabilities. The machine includes a tool magazine with 24 positions and a robust table size of 1020 × 510 mm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30i vertical machining centre we have for sale. Contact us for further details. • Control: Hurco WinMax • Operating hours: 10,398 h Podpfxoy I Uyze Abhopu • Table size: 1020 × 510 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, Offered is a vertical three-axis machining center. Travels X/Y/Z: 1524mm/660mm/610mm, table: 1675mm x 660mm, spindle speed: 12000rpm, tool holder: SK40, tool changer: 24 positions, spindle hours: 1937h (spindle replaced 10/2019), chip disposal: scraper conveyor, control system: WinMax. Equipped with 3D probe Renishaw, scraper chip conveyor, coolant system, spindle cooler, coolant spray gun, chip splash protection enclosure, flushing system for chip removal, electronic handwheel, rigid tapping, DXF software, cooling air through spindle switchable. Weight: approx. 8400kg, overall dimensions X/Y/Z: approx. 4650mm/3470mm/3030mm. Inspection possible by arrangement. Podpfey Ulmlex Abhopu

Condition: used, Year of construction: 2003, MACHINING CENTER HURCO VMX 42 YEAR: 2003 CNC: HURCO UltiMAX 4 Table: 1,270 x 610 mm Travels: X axis: 1,070 mm Y axis: 610 mm Z axis: 610 mm Spindle: ISO 40 DIN 69871 Speed: 10,000 rpm Power: 18 kW Tool magazine: 24 stations Complete with chip conveyor Ppodpfx Abeyup Urehsu Assorted tool holders included

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Psdpfx Absy Tx Nqohopu

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hurco VMX 64, Pedsy T Iuvspfx Abhepu Year of manufacture: 2002, Control system: Ultimax 4, Travel range X/Y/Z: 1625/860/760 mm, Tool changer: 40-position, Spindle speed: up to 8,000 rpm, High-pressure coolant system, Chip conveyor system, Pocket with islands, DXF, Simultaneous threading, Ultinet, Workpiece positioning detection, Ramping/helix plunging, Advanced Velocity Control, Z-axis cover defective.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Ppodpfxjy R Rn Ho Abhju Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: excellent (used), Year of construction: 2007, Hurco machining center VMX 24 condition see pictures Ppjdpfxjv Nzuio Abhou