Used Hydraulic Copy Lathe for sale (19,370)

Condition: excellent (used), Year of construction: 1995, - machine in stock - after a technical review - very good condition - year of production 1995   TECHNICAL PARAMETERS: - turning length max 1300 mm - turning diameter 120 mm - three lower knives - five top knives - steady Gijdpfod Rkkzsx Ah Hsl - hydraulic knife control - automatic control - magazine   Machine dimensions: - length 380 cm - width 210 cm - height 215 cm - weight ~ 3490 kg

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 770 Gisdpfx Ahsx R E R Ns Hsl Measurements depth 2045 Measurements height 2030 Machine weight 3150 Main Drive Punching force 115 tons Main motor power 11 kw Additional Equipment Dual-cylinder hydraulic system Easily interchangeable punching tool One set of punching tools included Angle cutting shear Flat bar shear Notching tool Rod cutting tool 1000 mm electronic back gauge Foot pedal with emergency stop on both sides Delivered with one set of Ø26 mm punch and die This HILALSAN HKM-115 was manufactured in 2022. A robust hydraulic shearing machine, it's ideal for those looking to get high-quality shearing capabilities. Contact us for more information. Application Types Shearing

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic Gisdpferbk Tfsx Ah Hsl • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Condition: ready for operation (used), Year of construction: 1984, Diameter: 700mm Spindle hole: 250mm Gsdpfx Ahjx Tptas Hjil Turning length: 3000mm

Condition: excellent (used), Catalogue number 7740 TECHNICAL SPECIFICATIONS - heating plate dimensions: 3000x1350 mm - number of loads: 1 - electrically heated shelf - clearance: 340 mm - number of cylinders: 6 - cylinder diameter: 80 mm - total power: 20.7 kW - pump motor: 1.1 kW - dimensions (L/W/H): 3570x1600x2200 mm - weight: approx. 3500 kg Gijdpfxox S Ebdj Ah Hel ADVANTAGES – made in Germany – electrically heated shelves – unpainted – in impeccable condition – used press Net price: 48,900 PLN Net price: 11,650 EUR at an exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, NCT 201/15” Touchscreen + USB Control (Windows based) Max. Swing over bed: 590 mm Max. Swing over cross slide: 340 mm Max. Turning diameter: 300 mm Center distance: 300 mm Chuck diameter: 8" Guide type: Linear Travels X / Z / Y / W: 160 / 455 / - / 325 mm Rapid traverse X / Z / Y / W axis: 24 / 30 / - / 24 mm MAIN SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-6 Spindle bore: D75 mm Bar diameter: max. D60 mm Drive: Belt Number of areas: 1 Motor power: 15 kW Cooling: Air DOUBLE SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-5 mm Motor power: 6.9 kW Drive: Belt TOOLS: Tool change: Tool positions: 12 Tool equipment: VDI30 Number of driven tool positions: 12 Maximum driven tool speed: 4000 rpm SETUP: Footprint x Height: 2693 x 1810 x 1950 mm Net weight of machine: 4230 kg BAR LOADER: Type: BF1500 / DH65-LN Max. bar length: 1500 mm Max. bar diameter: 65 mm Weight: approx. 333 kg Accessories, equipments - Chip conveyor - Coolant system - Bar feeder - Finished part conveyor - Counter spindle - C-axis + driven tool turret - Tool holders - Manuals - CE marking - Foot pedals Gisdpfxsx R Smks Ah Hel The machine has barelly been used. It is currently under power and located in Western Hungary and can be viewed upon request.

Condition: used, Year of construction: 2010, Make RASOMA Model DZS 250-2 Year of Build 01.2010 Technical Details: Control SIEMENS SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Technical Details: Control CNC » SIEMENS » SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Chuck diameter max. 260 mm Sled path X (per sled) approx. 900 mm Slide path Z 400 mm Turning spindle unit Spindle head A 6 (DIN 55026) Diameter in the front bearing 120 mm Spindle bore 38.1 mm Main drive Motorized insertion spindle with AC built-in motor, water-cooled, infinitely variable lubrication Lifetime grease drive power at 100% ED 28.3 kW at 40% ED 36 kW Speed ​​range 3500 rpm Torque on the turning spindle max. at 100% ED 300 Nm Feed drive X-axis via linear motor 1FN3 Rapid traverse speed 100 m/min Feed force 6915 N Z-axis via 1FT6 AC servomotors Rapid traverse speed 30 m/min Ball screw diameter 40 mm Feed force » 8 kN Tool system Disk turret tool holder mount VDI 40 tool positions Godpfx Ahjkyth Ij Heil 12 tool disk SW 320 position measuring system X-axis incremental linear length measuring system LC 183 Compressed air connection 6 bar Dimensions Length 5.276 mm Width 2.400 mm Height 3.310 mm

Condition: excellent (used), Year of construction: 2008, Control system MSX-850 IV. Axes C and Y, live tools, NC tailstock - fully programming. Gijdex Sw Aaepfx Ah Hsl Including chip conveyor. Chuck 300mm hole 90mm Diameter ... 420 - 500 mm Swing over bed ... 995 mm Swing over cross slide ... 825 mm Max. working length ... 1260 mm Max. bar diameter ... 90 mm Axe X ... 280 mm Axe Z ... 1370 mm Max. spindle revolutions ... 3000 rpm Spindle boring ... 105 mm Number of toos ... 10 Machine dimensions ... 4532 x 2291 x 2390 mm Machine weight ... 7600 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation - Various grooving features independent of the copy assembly with the help of the stop OPTIONS - Lower cabinet system Godpfercm D Dex Ah Hoil - Pneumatic system

Condition: new, sheet thickness: 8bending length: 3100upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle Giodpsd Ab Sasfx Ah Hsl - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 7.070,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 90 mm Clamping Unit Clamping force 5000 kN This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. Application Types Giedpfxex Nr Uxj Ah Hsl Injection Moulding

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm Gedpfowwt I Nox Ah Hjil - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, Doosan TT1800SY Gisdpfxowzxcaj Ah Hsl

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 134B, feed length X-axis: 1,120 mm, feed length Z-axis: 190 mm, feed rate X-axis: 15 m/min, center height: 1,115 mm, total width: 1,513 mm, center width: 1,000 mm, disc diameter: 125 mm, total height: 1,900 mm, total length: 3,450 mm, clamping diameter: 320 mm, cone diameter: 55 mm, rotational speed (min.): 2,880 rpm, swing diameter over top slide: 320 mm, spindle motor power: 4,000 W, swing diameter over cross slide: 320 mm, swing diameter over bed slide: 320 mm, quill diameter: 30 mm, quill stroke: 30 mm, rotational speed (max.): 7,400 rpm, Equipment: documentation/manual, Relief-Turning Lathe — STANKO 3451B (Special-purpose relief turning lathe for splined and profiled shafts) Gedpfx Ajx S Hc Noh Hjil The STANKO 3451B is a special-purpose relief-turning lathe designed for machining splined shafts and profiled cylindrical workpieces by relief turning. Manufactured in 1980, the machine is intended for precision machining operations in serial production and repair workshops, particularly in the manufacture of transmission and drive components. The machine is capable of processing workpieces with a maximum length of up to 1,000 mm and a maximum diameter of 320 mm, with an allowable workpiece weight of up to 80 kg. It supports machining of shafts with 3 to 48 splines, making it suitable for a wide range of spline profiles and configurations. The worktable provides a longitudinal travel (X-axis) of 1,120 mm and operates with a continuously adjustable feed speed from 1 to 15 m/min, allowing precise control of the relief-turning process. The vertical travel (Z-axis) is 190 mm, enabling accurate positioning of the cutting tool relative to the workpiece. The machine layout ensures sufficient clearance between the table and the spindle center for stable machining of splined shafts. The main spindle operates with stepped rotational speeds of 2880 / 4550 / 6300 / 7400 rpm, selected by change pulleys. The drive system is powered by a 4 kW electric motor, providing reliable performance for continuous industrial operation. The machine operates on three-phase power, 3 × 400 V, 50 Hz. With an overall weight of approximately 4,900 kg, the STANKO 3451B features a rigid cast-iron construction that provides excellent vibration damping and machining stability. The machine is supplied with original factory documentation and passport, ensuring proper operation and maintenance. Key Features: *Special-purpose relief-turning lathe *Designed for splined and profiled shafts *Maximum workpiece length: 1,000 mm *Maximum workpiece diameter: 320 mm *Workpiece weight up to 80 kg *Number of splines: 3–48 *Table feed speed: 1–15 m/min *Stepped spindle speeds: 2880 / 4550 / 6300 / 7400 rpm *Main motor power: 4 kW *Heavy rigid cast-iron construction (~4,900 kg) Three-phase power supply (3 × 400 V, 50 Hz) Factory documentation available Typical Applications: *Relief turning of splined shafts *Machining of profiled cylindrical shafts *Production of transmission and drive components *Repair and refurbishment of splined parts

Condition: new, sheet length: 3.200sheet thickness: 6,0total power requirements: 7,5weight approx.: 5.100messurements (LxWxH): 3.800 x 1.750 x 1.700 Our strong brand KK Kletzer                    Swing Beam Cutting Shear Vibration cut version Model SW has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ES21S without surcharge.  Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5° Motor power: 7,5 kW  Strokes per minute 12 Length: 3.800 mm  Width: 1.750 mm  Height: 1.700 mm  Weight: 5.100 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table We have many references! Godpfx Asnwt A Aeh Hsil

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, General Data Machine weight 8700 kg Measurements height 2095 mm Dimensions Machine Length 5155 mm Injection Unit Screw diameter 45 mm Clamping Unit Clamping force 1600 kN This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding Giedpfox Nr Hujx Ah Hsl

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button Gisdpfxex Rt Euo Ah Hel - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: excellent (used), Year of construction: 2010, turning length: 230 mm, turning diameter: 230 mm, spindle speed (max.): 5,000 rpm, spindle bore: 68 mm, spindle nose: A2-6, DOOSAN PUMA TT1800 SY Godpfx Ajxx Nc Nsh Hjil

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,235 h, General Data Machine weight 5300 kg Giedpfx Asx Nr Hzsh Hel Measurements height 1932 mm Dimensions Machine Length 3974 mm Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 800 kN This Engel Victory 330/80 Tech was manufactured in 2015. It features a clamping force of 800 kN, a screw diameter of 35 mm, and a maximum injection volume of 154 cm³. The machine dimensions are 3974 x 1437 x 1932 mm, weighing 5300 kg. Currently in production with excellent condition and 37,235 operating hours. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 330/80 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,013 h, General Data Machine weight 12200 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 1800 kN Giedpfxox Nr Rmj Ah Hjl This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Clamping Unit Giedpfox Nr R Hox Ah Hsl Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, General Data Machine weight 20000 kg Measurements height 2230 mm Dimensions Machine Length 8840 mm Injection Unit Gjdpfox Nr H Ijx Ah Heil Screw diameter 80 mm Clamping Unit Clamping force 5500 kN This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, General Data Machine weight 11000 kg Measurements height 2360 mm Giodpfx Ajx Nr Ryjh Hel Dimensions Machine Length 7420 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 4000 kN This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,164 h, General Data Machine weight 19400 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Injection Unit Gijdpfx Aex Nr Rtjh Hsl Screw diameter 60 mm Clamping Unit Clamping force 2600 kN This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 34,573 h, General Data Machine weight 2200 kg Measurements height 2240 mm Dimensions Machine Length 7200 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 4500 kN This HAITIAN JU4500II was manufactured in 2019. It features a clamping force of 4,500 kN, a maximum injection volume of 1,239 cm³, and a screw diameter of 80 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN JU4500II machine we have for sale. Contact us for more information about this machine. Gsdex Nkn Rspfx Ah Hjil Application Types Injection Moulding