Used Hydraulic Copy Lathe for sale (19,397)

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Fsdpfxew Ebm Ns Ag Rsft Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture Ffjdpfx Agsw Rkt Is Rot *

Condition: ready for operation (used), Year of construction: 2006, Maier MLK 32 D swiss type lathe with FMB TURBO 5-42 / 3200 / C bar feeder . Ffedpfx Aox Sqz Nog Rot Maier PRO-GE FANUC operating panel . The machine is in production , it can be inspected under power , full functional . Comes with full machine documentation and back-up .

Condition: good (used), Year of construction: 2006, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 700 mm, throat depth: 300 mm, Year of Manufacture: 2006 Chuck Diameter: 8" Number of Axes: 3 Length: 500 Swing Over Bed: 300 mm Ffjdjx Npv Tspfx Ag Rst Spindle Speed (RPM): 4000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Ffsdpfx Asxg Nd Ajg Rst Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. Ffjdpfxjq Nd Rbe Ag Ret 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Ffjdpjw Ebngefx Ag Rst Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, machine/vehicle number: SZFNN23208LD0xxxx, Year of construction: 2008, Please contact ATS Norway for more information Ffedev U Sdfopfx Ag Rst Please provide reference number upon request: 19910 Specifications: - 3 axles - Lift on 1 - Okay tires - Swing on 3 axles -Hydraulic bridges - Tool box - Double carriageways - Ready for delivery Description: Istrail machine trailer from 2008.  ready for delivery. Double hydraulic drive bridges. Technical approved: no EU-approved until: 15.05.2025 Own weight: 11960 Total Weight: 48000 Payload: 36040 Width: 255 Length: 1337

Condition: used, Year of construction: 2013, Please contact us for further information. Fsdpfox Nqg Hsx Ag Reft

Condition: good (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Model Year: 2007 Chuck Diameter: 8" Number of Axes: 2 Length: 500 Ffodox Npbiepfx Ag Rjt Swing Over Bed: 300 mm Spindle Speed (Rpm): 4000 Machinable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station Ffjdpfowynigsx Ag Rot MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: like new (used), Year of construction: 2017, functionality: fully functional, turning length: 8,000 mm, turning diameter: 1,600 mm, spindle motor power: 10,000 W, workpiece weight (max.): 35,000 kg, power: 10 kW (13.60 HP), Equipment: documentation/manual, KARATS CNC ROLL LATHE WITH FANUC-31i control. Ffjdpfx Aera Axyjg Rst Swing1600mm cneter length 8000mm. Weight workpiece between centers 35,000kg Spindle drive motor AC100kw Bed width:2200mm. Bed langth:12085mm.

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock Fodpjx Hdq Tofx Ag Reft - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: used, machine/vehicle number: SA9FT3A50MH17xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20727 Specifications: EU-approved until 07.05.2026 Model year: 2021 Tires: See photos Hydraulic loading ramps Manual widening Length: 1,095 cm Width: 254 cm Axle distance: 514 / 136 cm Ffodpewvy Rzjfx Ag Rjt Curb weight: 7,000 kg Tool compartment included Description:EU-approved and ready for immediate operation.Equipped with hydraulic loading ramps and manual widening.Available for quick delivery. Technical approved: Yes EU-approved until: 07.05.2026 Own weight: 7000 Total Weight: 28000 Payload: 21000 Width: 254 Length: 1095 Model: m/ hydrauliske kjørebruer

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Ffedpfx Agjx D I Uuj Ret Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2004, spindle speed (max.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Year of Manufacture: 2004 Chuck Diameter: 8" and 6" Number of Axes: 4 Length: 500 mm Ffsdpjx Npa Sjfx Ag Ret Spindle Bore Diameter: 300 mm Spindle Speed (rpm): 4000 Machinable Materials: Steel, Aluminium, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: good (used), Year of construction: 2006, 1 used CNC lathe Manufacturer: Doosan Model: Puma 300 MSB Year of manufacture: 2006 Control unit: Fanuc 18i TB Max. swing diameter: 590 mm Max. machining diameter: 355 mm Turning length: 583 mm Chuck diameter: 250 mm Travel X-axis: 650 mm Z-axis: 680 mm Ffodpfsx Taywjx Ag Ret Max. bar capacity main spindle: 76 mm Main spindle max. speed: 3,500 rpm Main spindle motor power: 22 kW Turret Number of tools: 12 Feed X-axis travel range: 240 mm Machine dimensions Length: 3,700 mm Width: 1,900 mm Weight: 6 t Equipped with: Subspindle diameter: 170 mm Power: 7.5 kW Passage: 52 mm Driven tools

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Fsdpswyvg Tefx Ag Reft Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: used, machine/vehicle number: VS94NTRGSMA86xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21540 Specifications: EU-approved until 28.07.2026 2021 model Tires (see pictures) Fsdpexm S Udjfx Ag Rsft Length: 1,290 cm Width: 255 cm Axle distance: 181/181 cm Curb weight: 13,940 kg Max payload: 59,060 kg Hydraulic loading ramps Lift on 1st axle Toolbox Description:Rojo semi low-loader from 2021 with a maximum payload of 59 tons.The trailer is EU-approved until July 2026.Available for prompt delivery. Technical approved: Yes EU-approved until: 28.07.2026 Own weight: 13940 Total Weight: 73000 Payload: 59060 Width: 255 Length: 1290 Model: 2021 Rojo Maskinsemi m/ hydrauliske kjørebruer

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning diameter: 500 mm, travel distance Z-axis: 800 mm, Year of Manufacture: 2015 Chuck Diameter: Collet Number of Axes: 2 Length: With guide Throat Diameter: 35mm Ffjdpfx Aox Nn Eyog Rjt Spindle Speed (RPM): 4500 Machinable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, machine/vehicle number: W09S3L330K0D4xxxx, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21506 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Good tires Air suspension Hydraulic loading ramps Extendable Manual widening Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Toolbox Ffsdpfx Aoxlx S Hog Ret Max payload: 39,190 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is recently EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 14.08.2026 Own weight: 11710 Total Weight: 50900 Payload: 39190 Width: 255 Length: 1355 Model: maskinsemi

Condition: good (used), Year of construction: 2007, functionality: fully functional, feed length Z-axis: 500 mm, rotational speed (min.): 3,000 rpm, fuel type: electric, fuel: electricity, throat depth: 500 mm, Chuck Diameter: 12" Spindle Bore: 500 mm Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK Ffedox Nnryepfx Ag Rjt

Condition: used, machine/vehicle number: W09S3L330J0D4xxxx, Year of construction: 2018, Please contact ATS Norway for more information Fsdpfx Agexlx Tds Rsft Please provide reference number upon request: 21508 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Decent tires Air suspension Hydraulic loading ramps Extendable Manual widening Toolbox Max payload: 39,265 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 11635 Total Weight: 50900 Payload: 39265 Width: 255 Length: 1355 Model: Doll Maskinsemi m/ Bredding og Hydrauliske bruer

Condition: good (used), Year of construction: 2013, spindle speed (min.): 4,000 rpm, travel distance Z-axis: 500 mm, 10" chuck diameter, Fedjx Nmm Ajpfx Ag Rjft

Condition: good (used), Year of construction: 2013, functionality: fully functional, throat depth: 500 mm, feed length Z-axis: 500 mm, rotational speed (min.): 4,500 rpm, fuel type: electric, fuel: electricity, CNC lathe Fsdpfx Agex Nhx Ts Rsft