Used Hydraulic Cutting Shears for sale (26,548)

Condition: good (used), functionality: fully functional, Year of construction: 2000, Used Safan guillotine shear Type HT 310-6 TS Capacity: 3100 x 6 mm Electrically adjustable backgauge, blade gap and cutting angle adjustment Equipped with pneumatic rear support table Gusdpjyglr Rjfx Aa Soa

Condition: excellent (used), Year of construction: 2013, AMADA MODEL GS 11 840 8 mm x 4050 HYDRAULIC year 2013 PROGRAMMABLE CNC SHEAR STAINLESS STEEL CAPACITY 6mm ALUMINIUM CAPACITY 10 mm CUTTING LENGTH 4050MM POWER BACK GAUGE 1000MM Godpfx Aajyr H U De Soua PNEUMATIC SHEET SUPPORTS SIDE GUAGE 1.5 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MOTOR 16 KW WEIGHT 11650KG

Condition: used, functionality: fully functional, This listing is for an industrial guillotine shear designed for cutting sheet metal with a maximum cutting length of 3040 mm and a maximum cutting thickness of 12 mm. The machine is equipped with a motorised back gauge with an adjustment range of 1000 mm, allowing precise positioning of the material. The shear is fitted with 17 hold-down clamps to secure the material during cutting. The total connected electrical load is approximately 23 kW, operating at 400 V and 50 A. The machine weighs around 11 tonnes, with additional weight from attachments and accessories. Machine dimensions are approximately 4.5 m (length) x 4.0 m (width) x 2.2 m (height). Transport dimensions are about 5.0 m x 2.25 m x 2.2 m. Gujdjylzcispfx Aa Sea Safety features include bright orange guards covering the moving parts in the upper cutting area and yellow safety fencing on the right side. Metal supports on the front bed help to hold the material securely during operation. The machine shows normal signs of wear consistent with industrial use, such as surface scratches and dirt. It is currently located in a well-lit industrial workshop environment, with visible hydraulic and mechanical components on the right side.

Condition: new, Year of construction: 2025, working width: 3,000 mm, sheet thickness (max.): 10 mm, Hydraulic guillotine shear – made to order (delivery time approx. 10–14 weeks) – includes foot pedal, touchscreen, rear operating area with light curtain monitoring, automatic/electric blade gap adjustment, automatic/electric cutting angle adjustment, hydraulic hold-down, motorized backgauge up to 1000 mm depth -Images similar- Godpfx Aeym Uv Eoa Soua

Condition: new, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 8 mm, warranty duration: 12 months, CNC Controlled Hydraulic Guillotine Shear – 3000 x 8 mm With its high cutting precision, robust frame construction, and CNC controlled systems, this machine provides the ideal solution for sheet metalworking shops and industrial production lines. It delivers high-quality, repeatable cutting performance across a range of sheet thicknesses. Standard Features - ELGO P40T Touchscreen NC Control Unit - Rexroth / Hoerbiger hydraulic system - Automatic CNC-controlled blade gap, stroke, and blade angle adjustment - 1,000 mm NC-controlled programmable motorized backgauge - 250 mm throat depth Gedpfx Asx Rrk Nsa Ssua - Programmable backgauge retract function - Backgauge lift-up feature for parts longer than 1,000 mm - Adjustable cutting length from the control panel to increase cut count for short cuts - Ball transfer sheet support table - 2 cutting edges on the upper blade / 4 cutting edges on the lower blade - Special pivot system designed to reduce maintenance requirements - 1,000 mm front support arms with rule, T-slot, and stopper - Front and side safety guards - Cutting line illumination and shadow wire - Front finger guard (1,000 mm openable cover) - Foot pedal - Movable control console and guarding cabinets - Emergency stop buttons Optional Features - Rear pneumatic sheet support system (Type 1) - Rear pneumatic sheet support system, front return (Type 2) - Angle adjustable squaring arm (0–180º) - Front support arms in custom lengths - Special throat depth (500 mm) - Full-length openable front finger guard cover - Front finger safety light curtain - Special blades - Laser cutting line - Oil heater or cooler - Automatic or manual centralized lubrication - Electrical cabinet air conditioning - CNC front support sheet arms - Rear light barrier compliant with CE standards - Light-duty guarding Technical Specifications (3000 x 8 mm) - Cutting length: 3,100 mm - Cutting capacity (450 N/mm²): 8 mm - Cutting capacity (700 N/mm²): 5 mm - Cutting angle: 0.5 – 2.7° - Number of hold-down cylinders: 14 - Cutting speed: 10 / 15 strokes/min - Throat depth: 250 mm - Backgauge travel (X-axis): 1,000 mm - Table length: 3,500 mm - Table width: 900 mm - Main motor power: 15 kW - Oil tank capacity: 275 L - Machine weight: approx. 7.5 tons Technical specifications may vary depending on the requested configuration.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Elgo, controller model: P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 8 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 13 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 12,000 kg, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, number of support arms: 2, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, 2021 MVD B13-3100 Guillotine Shears with Elgo P40T Control – Very Good Condition For sale is a 2021 MVD B13-3100 Hydraulic Guillotine Shear, equipped with the advanced Elgo P40T CNC Control. This machine is in very good condition, having been installed in 2021. The MVD B-Series shears are built for precision, productivity, and reliability, offering powerful hydraulic cutting performance with CNC-controlled accuracy. Perfect for fabrication shops, subcontractors, and sheet metal production. Machine Make: MVD Machine Model: B13-3100 Machine Type: Hydraulic Guillotine Machine Capacity: 3m x 13mm Machine Year: 2021 ✅ Key Features 3100 mm cutting length – handles large sheet sizes with ease 13 mm sheet capacity (mild steel) – robust heavy-duty performance Elgo P40T CNC Control – programmable backgauge, stroke, and cutting settings Hydraulic swing beam design – consistent and accurate cutting results CNC backgauge system with motorised adjustment Rugged welded frame for stability and precision Front sheet supports and squaring arm for operator convenience Safety light guards for operator protection Very Good condition – 2021 model, very low hours 📐 Technical Specifications – MVD B13-3100 Guillotine Shears Cutting Length: 3100 mm Capacity (Mild Steel): 13 mm Capacity (Stainless Steel): ~8 mm Backgauge Travel: 1000 mm (CNC controlled) Control: Elgo P40T CNC touchscreen – programmable stroke, backgauge, cutting angle Stroke per Minute: 8–20 (adjustable) Cutting Angle: 0.5°–2.5° adjustable Gsdpfjxddzqjx Aa Seua Throat Depth: ~100 mm Main Motor Power: 22 kW Hydraulic System: High-pressure precision hydraulics Dimensions (L×W×H): ~4000 × 2200 × 2100 mm Weight: ~12,000 kg 🌍 Condition Year of Manufacture: 2021 Control: Elgo P40T CNC Model: MVD B13-3100 Condition: Very Good – lightly used Ready for inspection and immediate delivery 🔑 Summary This 2021 MVD B13-3100 Hydraulic Guillotine Shear with Elgo P40T CNC Control offers 3100 mm cutting length, 13 mm capacity, and CNC accuracy. A modern, reliable, and powerful sheet metal cutting solution ideal for fabrication, subcontracting, and production facilities. Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2020, condition: new, Layout: Shears Attachment suited for: Construction machines Reinforcing Bar Cutter / Column Breaker Railway Rail Shear (cuts even old type cast rails) Tree Cutter Price is representative, for detailed infomation please contact us. As a knife, we can use high quality imported knives according to your request. Jaw spacing can be adjusted according to the width of the column you demolish Godpfxopa Rtmj Aa Sjua

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, ELGO Positioning System Electric blade gap adjustment. Gusdpfxsymyc Ro Aa Sja Rear thin sheet metal support/carriage, pneumatic and monobloc, length 700 mm. Square stop 1500 mm + 2 supports of 1000 mm Specifications Cutting length: 3100 mm Max. steel thickness: 10 mm Max. stainless steel thickness: 6 mm Number of sheet clamps: 15 Motorized back gauge stroke: 1000 mm Main motor power: 14.9 kW Weight: 10,500 kg Machine dimensions (L x W x H): 3900 x 2450 x 2200 mm

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg Equipment: · Manual back gauge · Cutting gap adjustment · Cutting angle adjustment Godpfx Astvfzcja Soua · Cutting line illumination

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. Gsdpfoycxgmjx Aa Seua - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: excellent (used), Year of construction: 2000, Technical specifications: Guedpfx Aeymgrrja Sja Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons The seller accepts no liability for typographical or data transmission errors. The machine’s appearance, technology and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2009, Expected in approx. 1 month: Used 4-meter CNC guillotine shear by Safan Model: M Shear 430 6 Capacity: 4300 x 6 mm High hold-down system Guedpfxjycwals Aa Sea Return to sender system Year of manufacture: 2009 Images shown are of another identical machine.

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports Gusdpetvb Iujfx Aa Ssa - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (min.): 15 1/min, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap, stroke, and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment based on material type and thickness Automatic stroke shortening for short sheet cuts (higher speed) CNC software infrastructure to minimize user errors Stress-relieved, heavy-duty steel welded frame Hardened guides and roller-guided upper table movement system 1,000 mm CNC-controlled, motorized and programmable backgauge Backgauge features: - Programmable retract function - Lifting feature for long workpieces - ±0.1 mm positioning accuracy Ball screw sheet support front table Top blade: 2 cutting edges / Bottom blade: 4 cutting edges High-alloy steel blades Special linkage system reducing maintenance needs Front support arms with ruler, T-slot, and stopper (1,000 mm) Cutting line illumination and shadow wire Front finger guard sheet (openable type) Front and side safety covers Foot pedal Movable control lever Emergency stop buttons Safety equipment compliant with CE standards Godpsx Nqp Isfx Aa Soua OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with front feeding function) Angle-adjustable front gauge (0–180°) Custom-length front support arms Full-length openable front finger guard cover Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual centralized lubrication system Electrical cabinet air conditioning system CNC-controlled front sheet support and feeding arms Special throat depth (500 mm) Lightweight safety covers TECHNICAL SPECIFICATIONS (MODEL C 06 / 3100) Cutting capacity (450 N/mm²): 6 mm Cutting capacity (700 N/mm²): 4 mm Cutting length: 3,100 mm Cutting angle: 0.5° – 2° (CNC-controlled) Cutting stroke: automatically adjusted Throat depth: 250 mm Backgauge movement range (X axis): 1,000 mm Cutting speed: 10 – 15 strokes/min Motor power: 10 kW Oil tank capacity: 200 L Machine weight: ~6.7 tons Machine dimensions (LxWxH): approximately 4,830 x 2,995 x 1,975 mm

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 4,000 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 12 1/min, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (according to material type and thickness) Automatic stroke reduction feature (increased speed for short cuts) High-precision, stress-relieved steel frame Hardened guides and roller-equipped upper table movement system 1,000 mm CNC-controlled, motorized, and programmable backgauge Backgauge features: - Programmable retraction - Raising function for long sheets - ±0.1 mm positioning accuracy Ball support front table for sheet feeding Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Special joint system requiring minimal maintenance Front squaring arms with scale, T-slot, and adjustable stopper (1,000 mm) Cutting line illumination and shadow wire Front finger guard plate (openable type) Front and side safety covers Foot pedal Movable control lever Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with sheet return function) Angle-adjustable front gauge (0–180°) Front squaring arms in custom lengths Full-length openable front finger guard cover Front finger safety light curtain Rear safety light barrier (CE-compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual central lubrication system Electric cabinet cooling system (air-conditioned) CNC-controlled front sheet support and feeding arms Special throat depth (500 mm) Light-duty guarding TECHNICAL SPECIFICATIONS (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Gsdpfex Nqphox Aa Sjua Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge movement range (X axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 4,000 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 12 1/min, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retraction movement • Backgauge lifting function for sheets longer than 1,000 mm • Adjustable cutting length via control panel for increased stroke rate in short cuts • Ball transfer sheet support table • Upper blade with 2 cutting edges / lower blade with 4 cutting edges • Special pivot system to reduce maintenance needs • 1,000 mm front support arms with ruler, T-slots, and stopper • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control lever and safety cabinets • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with sheet return to the front (Type 2) • Angle-adjustable squaring arm 0–180º • Front support arms of custom lengths • Special throat depth of 500 mm • Full-length openable front finger guard cover • Front finger protection safety light curtain • Special blades • Laser cutting line indicator • Oil heater or oil cooler • Automatic or manual centralized lubrication • Electrical cabinet air conditioning cooling • CNC-controlled front sheet support arms • CE-compliant rear light barrier • Lightweight safety guards TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 16 mm Cutting Capacity (700 N/mm²) 10 mm Cutting Length 4,000 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 6 / 12 spm Throat Depth 250 mm Backgauge Travel (X) 1,000 mm Table Length Table Width Guodpfex Npd Rjx Aa Sea Motor Power 30 kW Weight 21.5 tons

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, Standard Features Godpfx Aajx Npddo Sjua • ELGO P40T Touchscreen NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract function • Backgauge lifting feature for parts longer than 1,000 mm • Adjustable cutting length via control panel to increase the number of cuts for short workpieces • Ball transfer sheet support table • 2 cutting edges on upper blade / 4 cutting edges on lower blade • Special joint system to reduce maintenance requirements • 1,000 mm front support arms with ruler, T-slot, and stopper • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control lever and enclosure cabinets • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with forward delivery (Type 2) • Miter gauge adjustable from 0–180° • Front support arms in custom lengths • Special throat depth of 500 mm • Full-length openable front finger guard cover • Front finger safety light curtain • Special blades • Laser cutting line indicator • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front sheet support arms • CE-compliant rear light barrier • Lightweight guard TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 7 / 13 strokes per minute (spm) Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 tons

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Gedpjuddh Aefx Aa Ssua Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: used, Year of construction: 1980, sheet width / mm plate thickness / mm distance between columns / mm Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Guedpeg Twmhjfx Aa Soa Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons

Condition: used, Manufacturer: DIGÉP Model: DLB 7/2550 Gsdpfxex H Rzrs Aa Seua

Condition: used, sheet thickness: 4nuber of strokes: 60weight approx.: 3800messurements (LxWxH): 3560 x 1250 x 1300 Godpfsrmbdcox Aa Soua

Condition: used, Year of construction: 1980, sheet width 3,5 mm cutting width 3050 mm Gujdpfxjyacpms Aa Soa weight of the machine ca. 4,5 t

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Gedpfxoim Ixfj Aa Sjua

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge Gusdpfou Icnfjx Aa Sja *

Condition: used, Year of construction: 1999, weight of the machine ca. 16 t Godsx U A Hvepfx Aa Seua sheet width 3150 mm sheet thickness - max. 16 mm sheet width - min. 1,6 mm voltage 400 V range - high tensile 3950x2475x2520 mm