Used Hydraulic Motor for sale (34,069)

Condition: excellent (used), Electro-hydraulic swing arm punching machine Manufacturer: Sandt Model: ST 137 with operating manual Pressing force: 8 tons Table: 700 x 360 mm Punching head: 300 x 500 mm Maximum installation height: 215 mm Maximum punching stroke: 45 mm Dkjdpfx Ageyy S H Nofok For paper, leather, cardboard 380 Volt

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,235 h, General Data Machine weight 5300 kg Measurements height 1932 mm Dimensions Machine Length 3974 mm Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 800 kN This Engel Victory 330/80 Tech was manufactured in 2015. It features a clamping force of 800 kN, a screw diameter of 35 mm, and a maximum injection volume of 154 cm³. The machine dimensions are 3974 x 1437 x 1932 mm, weighing 5300 kg. Currently in production with excellent condition and 37,235 operating hours. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 330/80 Tech machine we have for sale. Contact us for more information. Dodpfxsx Nr Hze Agfokk Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 27,137 h, General Data Machine weight 2900 kg Measurements height 1780 mm Dimensions Machine Length 3179 mm Injection Unit Screw diameter 25 mm Clamping Unit Dedpfx Agjx Nkn Dsfskk Clamping force 400 kN This Engel VICTORY 200/40 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 40 tons and a screw diameter of 25 mm, it supports a maximum injection volume of 69 cm³. The machine includes a robot interface (Euromap 67) and is still in production, showcasing its reliability and excellent condition. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 34,573 h, General Data Machine weight 2200 kg Measurements height 2240 mm Dimensions Machine Length 7200 mm Injection Unit Screw diameter 80 mm Dsdpfxox Nkn Rj Agfskk Clamping Unit Clamping force 4500 kN This HAITIAN JU4500II was manufactured in 2019. It features a clamping force of 4,500 kN, a maximum injection volume of 1,239 cm³, and a screw diameter of 80 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN JU4500II machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,013 h, General Data Machine weight 12200 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Injection Unit Dodpfxsx Nr Rmj Agfjkk Screw diameter 50 mm Clamping Unit Clamping force 1800 kN This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dkedpfxjx Nr R Hj Agfok Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Clamping Unit Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, operating hours: 23,125 h, General Data Machine weight 22000 kg Measurements height 2160 mm Dimensions Dedpfx Asx Nkpbsgfekk Machine Length 5871 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 4500 kN This HAITIAN JU5500III was manufactured in 2021. A hydraulic injection moulding machine with a clamping force of 4,500 kN and a maximum injection volume of 1,239 cm³. Features a screw diameter of 80 mm and an opening stroke of 1,250 mm. Equipped with a robot interface, Euromap 67, and still in production. Consider the opportunity to buy this HAITIAN JU5500III hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, General Data Machine weight 20000 kg Measurements height 2230 mm Dimensions Machine Length 8840 mm Injection Unit Screw diameter 80 mm Clamping Unit Dksdpfsx Nr H Isx Agfsk Clamping force 5500 kN This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, General Data Machine weight 11000 kg Measurements height 2360 mm Dimensions Machine Length 7420 mm Injection Unit Screw diameter 80 mm Dksdpfx Agjx Nr Ryofok Clamping Unit Clamping force 4000 kN This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,164 h, General Data Machine weight 19400 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Injection Unit Screw diameter 60 mm Clamping Unit Dkjdpfx Aex Nr Rtjgfjk Clamping force 2600 kN This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 110 kW (149.56 HP), rotational speed (min.): 1,488 rpm, input frequency: 50 Hz, overall weight: 730 kg, protection type (IP code): IP55, For sale: Motor Lonne 110 kW, 400 VAC, 1488 rpm, 730 kg - €5000 Impeller RD S.056-800 RD S.056-800 IK115969 - €3000 Impeller LG S0.56-800 LG S0.56-8000 ID 115970 - €3000 Motor BEVI 3D 180M-4 B3 18.5 kW, 1470 rpm, S1, IP 55, Class F - €1000 Dkedpfx Agoyymuhofsk Centrifugal fan CASALS MBRC71/22T4 7.5 kW LG0 - €3500 Impeller RD S.056-900 ATEX RD S.056-900 ATEX ID - €4000 Impeller RD S0.56-710 ATEX RD S0.56-710 ID 90411 - €2500

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Dksdpfx Agjyx Ihyofjk

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation Dkodpfewvva Sjx Agfek can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s working feed 21 mm/s oil volume 175 l Dsdpsv Svbcjfx Agfskk power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: new, functionality: fully functional, New guillotine blades for CNTA3150/10A and CNTA 3150/16A hydraulic guillotine by STROJARNE PIESOK. A completely new set. In addition to the above mentioned, we offer a wide range of blades for guillotines of Czech and Slovak production (Strojarne Piesok): CNTA 2000/6.3A, CNTA 2000/10A, CNTA 3150/6.3A, CNTA 3150/10A, CNTA 3150/16A, CNTA 3150/25A NTE 2000/4, NTE 2000/6.3, NTE 3150/6.3, NTE 3150/10, NTC 1250/2.5, NTC 2000/2.5, NTC 2000/4, NTC 2500/4, NTA 3150 /10A, NTA 3150/16A, NTH 3150/10, NTH 3150/25A. Dkjdpfx Asv Rn H Uegfek Blades for guillotines of Polish Plasomat and Zamech production: NG3, NG4, NG5, NG8, NG13, NGH6, NGH10. Guillotine blades for guillotine shears H3222, H3222A also available form stock. Other offered spare parts are: bumper nuts, springs, single and double arm brush holders, brush holders’ repair kits, special friction linings for clutch discs, complete clutch discs and sealing sets.

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm Dsdpjvuuflefx Agfokk oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse Dksdpfx Ajvuuckjgfek

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm Dkedpjvut H Iofx Agfok table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: new, Pump unit type B125/16L manufactured by Orsta-hydraulik TGL 10868 Dodpfsv Umbrox Agfekk 15 kW Pmax 20 MPa The offered pump unit is unused, packed on pallets, available for viewing on site at our factory plant.

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Dkedjd Hxx Ajpfx Agfjk Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm Dsdpfjb A Rr Rsx Agfekk -Piston rod mounting: Ø 75 mm -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Condition: new, functionality: fully functional, load capacity: 45,000 kg, total length: 9,000 mm, Hydraulics Dsdjyyfl Ejpfx Agfekk Condition: New unit Technical condition: New Description: Extension cylinder for Linde Reachstacker series 357 C4230TL5 - C4535TL5

Condition: new, pressure 100 t stroke 400 mm 1010 mm 295 mm Djdsyv N Ngepfx Agfekk Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm Dksdpfjyv Ntfsx Agfok feed down 5,8 mm/sec feed up 9,5 mm/sec Heads 200x125 mm total power requirement 6 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1900x1000x2550 mm

Condition: new, pressure 180 t stroke 400 mm column daylight 1500 mm Frame Width 550 mm distance spindle /table max. 1000 mm total power requirement 7,5 kW Front light range 1550 mm Lateral light range 550 mm Dodpfxoyv I S Hj Agfokk weight of the machine ca. 2100 kg dimensions of the machine ca. 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark