Used Hydraulic Shearing Machine for sale (98,300)

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Codpfsxg Uikjx Abcsrh Clamping force 1500 kN Opening stroke 300 mm This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Injection Moulding

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 8 kW (10.88 HP), STANDARD EQUIPMENT Welded steel construction body Three-roll drive by motor Shafts made from special high-strength, hardened, and ground material Horizontal and vertical working positions Hardened standard roll sets Movable control panel separate from the body Manually adjustable mechanical side guides with 3-way movement Precise bending with motor brake Digital displays (2 units) OPTIONAL EQUIPMENT Pipe and profile bending roll sets Optional 2-axis hydraulic side guides Automation with NC control Crsdpfx Absw Smi Ijcjh TECHNICAL SPECIFICATIONS Roll Shaft Diameter: 100 mm Roll Diameter: 315 mm Working Speed: 7 m/min Motor Power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight: 3650 kg

Condition: used, Year of construction: 1997, Serial number: WMM00000V004xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19250 Specifications: - 3 axle - Turn on 1 - Hydraulic bridges - Good tires - 10 tonne axles - Ready for delivery Description: Mueller Machine towing from 1997. Codpfsv U S Rrox Abcerh Trailers need a bit of maintenance against rust and dirt. Hydraulic brakes and good tyres. Ready for delivery. Technical approved: no EU-approved until: 31.01.2018 Own weight: 6100 Total Weight: 30000 Payload: 23900 Width: 252 Length: 1045

Condition: used, Year of construction: 1980, Immediately available ex location: Swing Beam Shear RAS Type 82.25 Year of manufacture: 1980 Sheet width: 2540 mm Sheet thickness: 2 mm Stainless steel: 1.25 mm Cutting angle: 1.13 degrees Cjdpfsxld Rbjx Abcjrh Backgauge: 5 – 550 mm Drive: 3 kW Weight: 2 t Offered at a price of EUR 3,500—plus VAT, ex works.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. Codpfexflfmjx Abcjrh The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Condition: used, Single-acting hollow piston cylinder with spring return ENERPAC Hydraulic ram, hydraulic cylinder, hollow piston cylinder, machine lifter, clamping cylinder Model: BRH 1003, predecessor of RCH 1003 Lifting capacity: 100 tons Operating pressure: 700 bar Crsdpfxoxciuas Abcoh Piston stroke: 76 mm Piston rod diameter: 127 mm Outer diameter: 215 mm Closed height: 255 mm Through-hole diameter: Ø 79 mm Internal thread: Ø108 mm 12G" Hydraulic connection thread on cylinder: M18x1.5 - Hydraulic connection with high-flow quick-coupling type CH-604, thread M30x1.5 mm Net weight: 55 kg Very good condition 16 units available, price per unit

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,200 h, Injection Unit Screw diameter 60 mm Injection pressure 2006 bar Clamping Unit Clamping force 200 tons expandable to 300 tons Opening stroke 700 mm Mould height max 350 mm Additional Equipment Hydraulic ejector Side air valve Robot interface 4-zone mold temperature control system This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Application Types Crsdpfx Abow Ailbecoh Injection Moulding

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 5 kW (6.80 HP), STANDARD EQUIPMENT Welded steel construction body Three rollers with motor drive Shafts hardened and ground from special high-strength material Horizontal and vertical working position Hardened standard rolls Movable control panel separated from the main body Crjdpfxsw Smibs Abcjh Manually adjustable mechanical side supports movable in 3 directions Precision bending with braked motor Two digital indicators OPTIONAL EQUIPMENT Rolls for bending pipes and profiles Optional 2-axis hydraulic side supports Automation via NC control TECHNICAL SPECIFICATIONS Upper shaft diameter: 80 mm Lower shaft diameter: 70 mm Roll diameter: 245 mm Working speed: 7 m/min Motor power: 4.75 kW Length: 1500 mm Width: 1000 mm Height: 1400 mm Weight: 1645 kg

Condition: used, Year of construction: 1980, Immediately available ex site: Hydraulic swing bending machine RAS Type 69.30 Year of manufacture: 1980 Bending length: 3200 mm Material thickness: 3.0 mm Upper beam opening width: 300 mm Csdpfsxldv Rox Abcorh Drive: 5.5 kW Weight: 3.5 t Price: EUR 4,250.— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2002, operating hours: 70,000 h, Control Unit Brand KRAUSS MAFFEI Main Drive Number of axis 3 Injection Unit Screw diameter 90 mm Injection pressure 1742 bar Clamping Unit Clamping force 800 kN Additional Equipment Hydraulic pulley: 4 Case service: 5x hydraulic, 8x pneumatic Robot type: Remak RD30CNC Crane runway: 50000 kN Distance from crane to boom with chain: > 2150 mm Cedpfx Ajxgi S Hjbcjrh This 3-axis Krauss Maffei 800-5000MC4 was manufactured in 2002. It features a clamping force of 800 kN, a screw diameter of 90 mm, and a maximum shot volume of 2863 cc. The machine includes a Remak RD30CNC robot and supports a crane runway capacity of 50,000 kN. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 800-5000MC4 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Precise bending with braked motor Digital displays (2 units) Csdpfx Abow Smhwscorh OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Lower Shaft Construction: 50 mm Roll Diameter: 180 mm Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg

Year of construction: 2005, operating hours: 92,980 h, condition: ready for operation (used), This Engel Victory 750/200 Tech hydraulic injection moulding machine was manufactured in 2005. Consider the opportunity to buy this Engel Victory 750/200 Tech hydraulic injection moulding machine. Contact us for more information. Crsdpfx Abjxd H R Uocjh Application Types Injection Moulding

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Crsdew Slctopfx Abcjh Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: ready for operation (used), Year of construction: 1999, operating hours: 1,41,047 h, General Data Machine weight 12500 Control Unit Credownkcxepfx Abcoh Brand KRAUSS MAFFEI Model n/a Clamping Unit Clamping force 300 t This Krauss Maffei 300-1900 C1 was manufactured in 1999. A hydraulic injection moulding machine with a clamping force of 300 tons and a screw diameter of 70 mm. It has a working capacity of 1,900 cm3 and weighs 12,500 kg. Consider the opportunity to buy this Krauss Maffei 300-1900 C1 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Crjdpow Slcgjfx Abceh - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,717 h, Main Drive Number of axis 3 Clamping Unit Clamping force 1600 KN Additional Equipment Includes enclosure with clean air supply FilterFanUnit, removal robot, enclosure as shown in the pictures This 3-axis Arburg Allrounder 520S-1600-400 was manufactured in 2016. It features a force of 1,600 KN and includes an enclosure with a clean air supply FilterFanUnit, a removal robot, and operates on 400 V∼3∼50 Hz. Ideal for precision hydraulic injection moulding, consider the opportunity to buy this Arburg Allrounder 520S-1600-400 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Cjdpjxf N Ryofx Abcerh Injection Moulding

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Cedpfx Asw Slbvsbcjrh Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Clamping Unit Clamping force 1300 / 1600 / 2000 kN Crsdjxf N R Hspfx Abceh Additional Equipment Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2011, operating hours: 54,800 h, condition: ready for operation (used), Additional Equipment Euromap 67 Euromap 73 6-fold heating control 6-fold water connection Connection for dosing device This Arburg Allrounder 520H was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 520H hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Cedpfjxfw Dbjx Abcerh Injection Moulding

Year of construction: 2012, condition: ready for operation (used), This Netstal Elion 1750-840 was manufactured in 2012. It features a clamping force of 1,750 kN, tiebar spacing of 510 mm x 510 mm, and a screw diameter of 50 mm. Ideal for precision in hydraulic injection moulding, consider the opportunity to buy this Netstal Elion 1750-840 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Crsdpoxfml Uofx Abcoh

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN Credjxfw D Iopfx Abcsh This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 28400 kg Crjdpfxexb E I Te Abceh Additional Equipment The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2007, operating hours: 70,000 h, condition: ready for operation (used), This Arburg Allrounder 820 S 4000-2100 was manufactured in 2007. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and an injection pressure up to 2500 bar. The machine has a hydraulic pump drive power of 55 kW and a total installed power of 88.9 kW. Ideal for precision in plastic processing, it offers robust performance with a comprehensive control system. Contact us for more information about this machine. Credjxc Rd Aspfx Abceh Application Types Injection Moulding

Year of construction: 2007, condition: ready for operation (used), This Krauss Maffei 110-750 CX was manufactured in 2007. It is a hydraulic injection moulding machine with significant operating hours, indicating robust performance over the years. Unit 1 has 63,972 hours, and Unit 2 has 69,878 hours. Consider the opportunity to buy this Krauss Maffei 110-750 CX hydraulic injection moulding machine. Contact us for more information about this machine. Crjdoxczthspfx Abcjh Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 90 mm Screw speed 180 r/min Clamping Unit Clamping force 6500 kN Opening stroke 1650 mm Max open daylight 3650 mm Distance between bars 1160 × 960 mm Mould height min 400 mm Mould height max 2000 mm Ejector stroke 210 mm Ejector force for / back 150 kN This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Crodpfxexd Iawe Abcjh Application Types Injection Moulding