Used Ifa Adk 125 for sale (4,036)

Condition: excellent (used), functionality: fully functional, total height: 16,250 mm, outer diameter: 3,550 mm, 5 x 125 m³ aluminum storage silo with a wide base (plastic granulate silo) Technical data / Dimensions Available quantity: 5 Volume: approx. 125,000 liters Container type: Silo Condition: used Food grade: no Design: vertical Ibjdpfx Aoznn Nteiysb Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 15,000 mm Overall height: approx. 16,250 mm Weight: approx. 2,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Wall thickness, bottom: approx. 5.5 mm Wall thickness, top: approx. 5.0 mm Wall thickness, shell / cylinder: approx. 3.5 - 5.5 mm Ground clearance: approx. 500 mm Material / Properties Material, inner shell: Aluminum Internal welds ground smooth Notes: Material: AlMg3 / AlSi Equipment Base design: base ring/wide base Quantity: 1 Mounting: fixed Bottom type, top: conical bottom Bottom type, bottom: cone Cone angle: 90 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eye 1 x manhole DN 500 with safety grid 1 x flange DN 100 (filling line) 1 x flange DN 300 (level measurement) 1 x threaded socket for Max sensor 1 x flange DN 100 (filling) 1 x vent DN 200 with hood Shell: 1 x service access door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100, ending in a TW connection 1 x threaded socket 1 1/2" for empty indicator Bottom: The silos end at the bottom in a 90° cone with a flange DN 150 with emergency shut-off valve and suction box. Fittings available Notes: A matching access ladder (two-section) can be optionally purchased (additional cost: €1,500 plus VAT). The measuring and control technology installed on the silo will be supplied free of charge. However, no guarantee can be given for its perfect functioning.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Ibedpfx Asy Tvdxjiyeb Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Ibedpfx Aiez Agy Heyob Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, Completely overhauled BRUDERER high-speed stamping press BSTA125 incl. new press control system Technical data: Tonnage: 1250 kN Tooling opening: 1170 mm Strokes per minute: 100–850 SPM (depending on selected stroke) Adjustable stroke: 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment range: 89 mm Iodpfx Aiey D H H Ejysbb Tool installation height: 268–386.5 mm (depending on selected stroke) Bolster plate: 1150 x 1070 mm Ram area: 1040 x 600 mm Strip pass width: 440 mm Base plate opening: 1120 x 350 mm Strip entry height: 80–180 mm Strip feed direction: left to right Feeder: servo feed

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 3,700 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: BERNARDO URS 1000 N universal cylindrical grinding machine, year of manufacture 2021. The machine is virtually new and has only been used a few times. It was originally purchased as part of an expansion of our machining capabilities. Following a change in the company's business profile, the machine was not put into regular production. The sale is therefore not related to any technical fault or machine failure. The machine is in excellent condition with minimal signs of use. It is designed for precision external cylindrical grinding as well as internal grinding. With a distance between centres of 1000 mm and a grinding diameter of up to 320 mm, it is suitable for toolrooms, machining companies, shaft production and refurbishment, machine-part manufacturing and small-batch production. Direct sale by the machine owner – SAWA Electronic, Poland. Main technical data: year of manufacture: 2021 distance between centres: 1000 mm centre height: 180 mm external grinding diameter: 8–320 mm maximum workpiece weight: 150 kg internal grinding diameter: 30/35–100 mm maximum internal grinding depth: 125 mm workhead spindle speed: 25–220 rpm grinding wheel: 400 × 50 × 203 mm grinding spindle speed: 1670 rpm internal grinding spindle speed: 10,000 rpm grinding head swivel range: ±30° hydraulic table feed digital position readout power supply: 400 V machine weight: approx. 3700 kg overall dimensions: approx. 3700 × 1900 × 1500 mm Equipment includes: internal grinding attachment 3-jaw chuck Ø200 mm steady rests coolant system digital readout grinding wheel dressing device grinding wheel balancing equipment Ibsdpfx Aezz Nbwjiyob Price: PLN 75,000 net + VAT Price: EUR 17,500 net + VAT Machine location: Regimin, Mazowieckie, Poland. Inspection and machine demonstration possible by prior arrangement.

Condition: good (used), Year of construction: 2005, Offer 25238 Ijdjwzigcjpfx Aiyobb Technical Data: - Max. load capacity with horizontal table top: 350 kg - Max. load capacity in all inclined positions: 300 kg - Faceplate diameter: 400 mm - Through hole / hollow shaft: 125 mm - Faceplate manually tiltable left + right: 0 - 90° - Rotational speed infinitely variable: approx. 0.15 - 5.0 rpm - Right and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Drive: 400 V - Table height in horizontal position: approx. 900 mm - Required space: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck: 250 mm

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Ijdpsz Ap Imsfx Aiyobb Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: good (used), Year of construction: 2003, operating hours: 8,500 h, functionality: fully functional, Brückner RAM + SETEX Ibodpezphgnofx Aiyob

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,250 h, load capacity: 4,500 kg, lifting height: 4,450 mm, fuel type: electric, mast type: telescopic, construction height: 3,050 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,500 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 7.00 - 15, rear tire type: superelastic tires (black), rear tire size: 21 x 8 - 9, overall weight: 6,866 kg, total height: 3,050 mm, total length: 3,000 mm, total width: 1,700 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-45 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.500 kg Lifting height: 4.450 mm Closed height: 3.050 mm Mast: Standard (2W445) Fork length: 1.500 mm Fork carriage: 3A Drive: Elektro 80V Battery: 80 V 930 Ah v. 2016 Charger: Dreiphasig 80 V 125 At tested Tyres: Superelastik SE 7.00 - %) / 21 x 8 - 9 Service weight: 6.866 kg Length: 3.000 mm Width: 1.700 mm Year of manufacture: 2011 Iedpfez Aqilsx Aiyjbb Operating hours: 7.250 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309247 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 1995, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, oil tank capacity: 200 l, total length: 4,500 mm, total width: 2,200 mm, total height: 3,000 mm, controller manufacturer: CYBELEC, controller model: CybTouch 15, working width: 3,550 mm, bending force (max.): 125 t, distance between stands: 3,050 mm, control type: CNC control, type of crowning: manual, Equipment/Accessories: - Manual crowning - 3 x manual backgauge fingers - Pneumatic die shifting - Pneumatic upper tool clamping Ibedpfjywr D Aex Aiysb - Foot switch - Cybelec CybTouch 15 (new 2025) - Set of upper and lower tools

Condition: used, - Model: IFA/100 - Flour capacity: 65 kg - Dough capacity (mix): 100 kg - Bowl volume: 145 litres - Power: 5.7 kW - Dimensions (W x D x H): 75 x 120 x 152 cm - Weight: 480 kg - Frame: heavy-duty steel, mounted on wheels - Motors: 2 double-speed motors (one for the spiral, one for the bowl) - Bowl, spiral, central column, and safety guard: stainless steel Ibsdsw Duriopfx Aiysb The pre-owned IFA 100 fixed-bowl spiral mixer is a professional-grade machine designed for craft bakers and pastry chefs who demand performance, durability, and cost-efficiency. Manufactured by ALDEGHERI FORNI, this mixer is renowned for its Italian build quality and long-term reliability. Tjy Tew Duriodxugeb With a 65 kg flour capacity and a maximum dough output of 100 kg, it is ideally suited for medium to large-scale production. The 145-litre stainless steel bowl, along with the spiral and guard, ensures optimal hygiene and easy cleaning. The IFA 100 spiral mixer features a heavy-gauge steel frame mounted on wheels, providing both stability during operation and ease of movement when required. Its two double-speed motors enable efficient and versatile kneading, adaptable to various dough consistencies. The integrated low-voltage (24V) electric control with timers allows precise and safe operation, whether in manual, semi-automatic, or fully automatic modes.

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. Isdpfx Aiey D Rk Ieyebb AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Ibjdszwpvaspfx Aiyob Price is quoted plus VAT.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: FI125, 1 ABUS LW wall-mounted slewing crane, 125 kg rated load / lifting capacity Jib length 5 m, 125 kg rated load With Abus GM chain hoist, rated load 125 kg Weight incl. wall bracket approx. 250 kg Complete with chain hoist, cable trolley, trolley and small parts Slewing range 270° Item location: 75053 Gondelsheim The system is fully dismantled and available immediately Shipping by freight carrier or collection Ibedsyl Sx Uepfx Aiyjb Please enquire for shipping costs by postal code

Condition: excellent (used), first registration: 07/2018, total length: 4,000 mm, total width: 2,550 mm, wheelbase: 2,220 mm, color: other, Year of construction: 2018, Superstructure Fifth wheel height: 125 cm = More information = Empty weight: 2.280 kg Carrying capacity: 25.720 kg GVW: 28.000 kg APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good Registration number: 20-04-ZZ = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business Iedpfox A Hchox Aiyobb - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, mileage: 1,07,000 km, power: 230 kW (312.71 HP), first registration: 12/1997, fuel type: diesel, overall weight: 18,000 kg, gearing type: mechanical, emission class: euro2, loading space length: 4,400 mm, loading space width: 2,150 mm, loading space height: 600 mm, Equipment: crane, Crane: ----- Engine brake ----- 3-way tipper ----- Hiab 125-3 ----- Trailer coupling Ibsdpozu U Ucsfx Aiyob Suspension: Leaf spring suspension

Condition: ready for operation (used), functionality: fully functional, Invema radial drilling machine Arm length: 130 Drilling capacity in steel: 45 mm Ibedezv T E Nopfx Aiyeb Accessories: cube

Condition: used, mileage: 4,80,000 km, power: 294 kW (399.73 HP), first registration: 12/1999, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, loading space length: 4,750 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, Equipment: air conditioning, crane, * Mercedes-Benz 1840 Actros MP1 2-way tipper with Hiab crane * First registered in 1999 * 480,000 km * Euro 2 * Double H-gear transmission Ijdsyq A Ahopfx Aiyjbb * Leaf-spring air suspension * 4x2 axle drive * Air conditioning * Hydraulic tow bar * Tipper body: 4.75 x 2.45 x 1.10 m * Wheelbase: 4.10 m * Unladen weight: 10,620 kg * Crane: Hiab 125-3 * 3 hydraulic, 1 mechanical * 1,050 kg at 10 m * Max. weight: 6,000 kg * Radio control * Grab control * High seat

Condition: used, TECHNICAL DETAILS - centers height : 125 [mm] - max grinding length : 430 [mm] - max part diameter : 249 [mm] - max part weight : 100 [kg] - grinding wheel size : Ø400 x 63 x 127 [mm] Ibsdpfxjy Tb Aaj Aiyjb - part holder headstock spindle speed : 8 - 800 [rpm] - max stroke X, Z : 320 , 650 [mm] - floor space : 2500 x 2000 [mm] - weight : 4700 [kg] EQUIPMENT - CN FANUC 18iTA - tailstock with fine adjustment - grinding head type URS - grinding head orientation each 0.1 degrees - inside grinding device with spindles Ø120 mm FISCHER type MFZ-1090 90000 Rpm and et type MFV-1230 12000-30000 Rpm - various grinding wheel flanges - grinding wheel extractor - 2 diamond dressing devices for inside and external grinding wheels - active flagging device MARPOSS Kel-pos - tool-measuring system Kel-set - Kel set system - 3 jaws chuck

Condition: reconditioned (used), Kemper dough mixer Ijdpozi A Dujfx Aiyjbb - model F 125 ASL - used - capacity: 200 kg of dough - 1 removable mixing bowl - recently refurbished - good technical condition - pick-up from warehouse / shipping option available - price on request

Year of construction: 2009, condition: used, functionality: fully functional, Professional electrically operated gutter forming machine designed for continuous production of half-round or angular gutters from coil material. Suitable for steel, aluminium and copper. The machine forms gutters directly from metal strip and is suitable for roofing, sheet-metal and rainwater system production. Technical specifications: Gutter type: half-round or angular Available gutter sizes: 125 mm and 150 mm (5" and 6") Material: galvanized/painted steel, aluminium, copper Steel thickness: 0.50–0.57 mm Copper: 16 oz Strip width: 298–381 mm Production speed: up to 16 m/min Electrically operated Continuous roll-forming process Iodpfx Aijzyly Hoyjbb Robust industrial construction Advantages: Fast and efficient production with consistent gutter profile and dimensions. The machine is suitable both for workshop production and professional gutter manufacturing operations. Condition: Used, fully operational. Location: Latvia.

Condition: used, Surface grinder MÄGERLE MFP-125-35 Iodpfsy Tzcmsx Aiyjbb

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Isdpfx Ajzzaxajiysbb Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Year of construction: 2015, operating hours: 71 h, condition: used, For sale, a BOMAG BPR 100/80 D/E reversible plate compactor from 2014. Heavy-duty professional plate compactor, suitable for compacting soil, sand, foundations, and paving. The machine has only 175 operating hours and is in good used condition. Brand: BOMAG. Model: BPR 100/80 D/E. Year: 2014. Operating hours: 175 hours. Forward and reverse operation. Heavy-duty construction. Professional BOMAG machine. The machine can be viewed, tested, and collected directly from our location in Deventer, the Netherlands. For more information, photos, videos, or pricing, please contact us. Pieter Haverhoek. Haverhoek Trucks B.V. Zweedsestraat 6. 7418 BG Deventer. The Netherlands. = Additional information = Year of manufacture: June 2015 Dimensions (L x W x H): 50 x 55 x 125 cm CE marking: yes Ijdoz Da A Ispfx Aiyebb Overall condition: very good Technical condition: very good Optical condition: good

Condition: excellent (used), 460 USED Kemper Spiral mixer. TECHNICAL DATA: - Flour capacity: 125 kg, - Dough capacity: 160 kg, - 2 speeds, - Power: 5.5 - 8.5 kW, 380 V, 3 phase. Iedpfx Aijzlrv Esyjbb EXTERNAL DIMENSIONS (in cm) - W: 140, - L: 85, - H: 148. EQUIPMENT: - 2 bowls Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.