Used Ifa Adk 125 for sale (6,414)

Condition: good (used), Year of construction: 1976, machine/vehicle number: 03-76, Offer 25426 Isdpfx Abexx Swpj Ioa Technical specifications: - Max. material thickness at 40 kg/mm² tensile strength: 4 mm - Max. throat depth: 420 mm - Center roll distance: 125 mm - Roll shaft diameter: 50 mm - Shaft thickness: 70 mm - Infinitely variable working speed - Forward and reverse operation - Manual adjustment of the upper roll - Drive: 400 V / 4 kW - Required floor space approx.: W 700 x H 1650 x D 1450 mm - Approx. weight: 600 kg

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock number: 1039-8700 Machine type: Vertical Machining Centre Manufacturer: DECKEL MAHO Model: DMU 125 T Year of manufacture: 1998 Control: Heidenhain TNC 426 Location: D-59302 Oelde, Germany Country of origin: Germany Delivery time: by arrangement Freight terms: ex-site Additional information: CNC Vertical Machining Centre DECKEL MAHO - DMU 125 T - ICS (internal coolant supply) WE OFFER YOU: • Workshop-inspected machines • Free loaded onto truck • NO auction fees • Delivery possible (at extra cost) • Unloading and commissioning (at extra cost) Technical Details Travel paths: X-axis travel: 1,250 mm y-axis travel: 880 mm z-axis travel: 800 mm Control: Heidenhain TNC 426 Main spindle: • Spindle speed range: max. 12,000 rpm • Main spindle drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Worktable: • Clamping surface: 1,500 x 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool changer: • Number of tool pockets: 30 positions • Max. tool diameter: 80 mm • Max. tool diameter with adjacent pockets empty: 160 mm • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total tool weight: 100 kg Feed rates: Iedpfx Ajxtmpijb Iea • Rapid traverse (X / Y / Z): 15 m/min • Feed rate: 10,000 mm/min Total power consumption: 29 kW Machine weight approx.: 16.0 t Space requirements approx.: 7.0 x 5.0 x 3.3 m Accessories • Documentation • Chip conveyor • Coolant system • High-pressure cooling • Internal coolant supply • Tool changer • Touch probe (Heidenhain) • Electronic handwheel

Condition: used, Year of construction: 2004, operating hours: 20,676 h, overall weight: 4,100 kg, rotor diameter: 370 mm, number of blades: 37, rotor width: 1,300 mm, power: 55 kW (74.78 HP), 1 corrugated shredder plant for shredding: Ijdpjxwa T Nofx Ab Iea paper, chipboard, various plastics Chain conveyor belt width 1000 mm Screw drag chain conveyor KKF 500-1K-U/TS315 Individual sale possible!!!

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine; it is connected and can be tested. A video of the machine can be sent via WhatsApp. Swing diameter over bed: 1250 mm – Swing diameter over support: 1000 mm – Turning length: 6000 mm. Iodpjxwqk Eefx Ab Ija

Condition: ready for operation (used), Hello, the machine is in very good condition. Please let me know if you are interested. Iodpfx Asxu H Sgsb Ija

Condition: good (used), Machine vice, sturdy vice, drill press vice Iedpfx Aexrz Auob Ioa -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Condition: used, Year of construction: 2022, operating hours: 267 h, maximum speed: 40 km/h, front tire size: 440/65 R28 | 0%, rear tire size: 540/65 R38 | 0%, tire size: 540/65 R38, Tyres (front): 440/65 R28, Tyres (rear): 540/65 R38, Operating hours: 267 Basic equipment / technical data Engine Rated power (ISO): 94 / 125 kW / hp at 2200 rpm Max. power: 97 / 131 kW / hp at 2000 rpm Max. torque: 520 Nm at 1500 rpm Manufacturer / Type: Agco Power / 44 MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4 valves per cylinder, Stage V Controlled turbocharger, SCR catalyst, DOC diesel oxidation catalyst, SC diesel particulate filter Idle speed 850, with parking brake engaged 720 rpm One-piece, foldable clear-view engine bonnet Exhaust pipe on the right side in front of the cab Fuel tank capacity: 200 litres / AdBlue 20 litres Transmission / PTO 24/24-speed Dyna-6, SpeedMatching, AutoDrive, 40 km/h ECO PowerControl lever on the left with powershuttle, clutch control, 4-step powershift with single lever, semi-automatic range shifting and Autotronic monitoring Permanently cooled wet travel clutches with independent lubrication system 2-speed switchable PTO: 540 / 540E / 1000, 1 3/8" 6-spline shaft PTO mode switching electrically from the cab PTO START/STOP button on the left rear fender Iedev T I Azopfx Ab Isa Hydraulics / Linkage Load Sensing hydraulics 110 l/min Leak oil collection at quick couplers, Load Sensing lines with couplers (PowerBeyond P,T,LS) 1st & 2nd remote valve electrically controlled, MicroJoystick on MultiPad 3rd & 4th mechanical remote valves OC: s/d, MR, EA + d, EA, SST

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Isdexran Nspfx Ab Ioa Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left With tools as shown in the picture

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! Iedpfxou Idw Ij Ab Iea - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: excellent (used), functionality: fully functional, I am selling this machine, connected and can be tested. Can send a video of the machine via whatsapp. Ijdpfx Abjv Nw D He Ija Swing diameter over bed: 1250 mm Swing diameter over slide: 940 mm Center distance: 5000 mm Spindle bore: 102 mm

Condition: excellent (used), Year of construction: 2000, Engel ES 500/125 HL Ijdpfoxu Rqtox Ab Ija Clamping Force 125 tons Year of manufacture: 2000 Screw diameter: 45 mm Injection volume: 318 cm³

Condition: new, Cutting area round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting area round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting area round 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m / min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw arm can be tilted up to 60 - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Stable saw arm for low-vibration work - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results Iedpfx Aoilk Ekob Iea - Environmentally friendly, as there is no need to use lubricants and coolants - Ideal for use on construction sites due to its low weight - Underframe optionally available (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Underframe available at an extra charge: 149 Euro net

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Iodpjvut D Tefx Ab Ija

Condition: used, Year of construction: 1993, max. wheel diameter 125 mm total power requirement 34 kW kW weight of the machine ca. ca6.9 t t dimensions of the machine ca. ca. 3.3 x 2,1 x 2,5 m m Iodpfx Abjtugkre Iea

Year of construction: 2018, condition: used, Technical details: lifting capacity: 0,125 t swival range : 180 ° Arm length: 4000 mm arm length:: Säule - Kranhaken: 3850 mm height lower edge cantilever arm: 3000 mm column diameter: Ø 220 mm rotation: 270 ° Dimensions of the crane assembled: LxWxH: 4800 x 1300 x 3250 mm Dimensions of filling container: LxWxH: 1100 x 1000 x 740 mm Column height: 3200 mm Heavy-duty operation = manual with swivel stop Hoist: Hans Hebetechnik load capacity 1000kg; lifting height approx. 2400mm; hook Ø 30mm with rope safety device; travel distance hoist 2700mm; control via pendant control The crane can be moved via the filling container. Ijdsu Utmpepfx Ab Iea *

Condition: excellent (used), Year of construction: 1999, x-path 1,250 mm y-path 880 mm z-path 800 mm Main spindle: Speed range - main spindle max. 12,000 min/-1 Drive power - main spindle 15 / 10 kW Table clamping area 1,500 x 1,050 mm Number of tool positions 30 pos. Iedpfx Aogypabeb Ija

Condition: excellent (used), Year of construction: 1995, Krauss-Maffei KM 125-620 C1 Clamping force: 125 tons Year: 1995 Screw diameter: 50 mm Isdpfx Abexu Rk Hj Ija Injection volume: 377 cm³ Shot weight: 343 g Tie bar distance: 47x47 cm

Condition: new, Undercarriage suitable for the mobile bandsaw MIOTAL® S 125 G Isdpew Hxduefx Ab Isa

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive Iodpjvuk N Tjfx Ab Ija as is where is, WITHOUT putting into operation

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity Isdpfxsxpqzzo Ab Ija - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1190 mm Good condition Suitable for collecting, storing and transferring recyclables

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box Iodpfx Absu Idwbs Isa - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m Isdpju Nfibofx Ab Ioa dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles Iedpfx Abeu Idvko Isa - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. *

Year of construction: 1979, condition: used, Technical details: Flow rate: 400 m³/h negative pressure : 1250 pa motor: Typ B5-71 mit 2850 U/min connection electric: 380 V total power requirement: 0,37 kW weight of the machine approx.: 35 / 28 kg dimension machine xH: Ø 0,5 x 1,3 m Isdpfou Nwwqsx Ab Iea Trockenabscheider mit Ventilator, beide Geräte stehen als Ersatzteilspender zum Verkauf! Nr. 1 = 400 m³/h BJ 1979 (Zustand: Motor i.O., Saugprozess außer Funktion) Nr. 3 = 400 m³/h BJ 1979 (Zustand: unvollständig!) Dry separator with fan Nr. 1 + Nr. 2 (Nr. 1 = 400 m³/h + Nr. 3) Suction nozzle Ø 40 x 50mm Operating temperature 50°. Filter space = approx. Ø 400 x 500m i.D. *

Condition: used, Technical details: number of spindles: 9 Stück weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. * Iodpfx Aju Idwneb Ija