Used Internal Grinding Device for sale (22,786)

Condition: used, Year of construction: 2003, grinding length 1.000 mm grinding width 700 mm workpiece height 500 mm table-size 1.000 x 500 mm max. table load 1.000 kg magnetic clamping plate 1.000 x 500 mm table travel longitudinal 1.300 mm table travel cross 600 mm table feed 2 - 35 m/min turning speed range - grinding wheel 1.450 U/min grinding wheel size Ø 400 x 60 x 127 mm drive capacity - spindle motor 11,0 kW dressing device Tischabrichter voltage 400 V Ltsdpfxex Ny Ako Aanja total power requirement 35 kVA weight of the machine ca. 6,3 t dimensions of the machine ca. 3,80 x 2,00 x 2,35 m band filter unit 1,80 x 0,60 x 2,35 m hydraulic power unit 0,85 x 0,65 x 1,15 m - Serial-No.: 209040 - Control: SIEMENS SIMATIC OP27 - Electronic handwheel - Dressing device on machine table - Paper band filter system

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Ltsdovvkipjpfx Aansa

Condition: reconditioned (used), Year of construction: 2015, SEEDTEC YSG-618 TS Surface Grinding Machine With 1-axis NC system ST-2 control Year of manufacture: 2015 Grinding area: 465 mm x 150 mm With the following accessories: Magnetic clamping plate 350 mm x 160 mm Electronic handwheel Paper belt filter system Machine light Ltjdpfx Aaowgmy Rjnoa 5 machine mounts

Condition: used, machine/vehicle number: 15037991278R / 1407713xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 18748 Specifications: - 2015 model - Type: SEHK300 - Slightly used - Remote control with bluetooth - Lifting capacity: 30,000 - Ready for delivery Description: 2015 Suxxesion pipe spreader in good condition. Flies with a number of pipes and extra equipment (see pictures). Ready for delivery. Ltodpfx Aevgyd Rsanja   Own weight: 1 Model: SEHK300 rørløfter

Condition: ready for operation (used), Max. diameter: 320mm Ledpfox Iuurjx Aansta Max. working length: 1000mm

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Technical data are in documents . Lodpfxouwp Epe Aanota

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 3200 mm Measurements depth 6400 mm Measurements height 2500 mm Machine weight 11000 kg Table Table load 1200 kg Ledpfx Aasx D Na Esnota Tools Number of index 30 This AMADA MEISTER G3 was manufactured in 2013. A robust surface grinding machine, it's ideal for precision metalworking. Consider the opportunity to buy this AMADA MEISTER G3 surface grinding machine. Contact us for more information. Application Types Grinding

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Lodewhqprjpfx Aanota

Condition: good (used), Internal micrometer screws, micrometer screw, inner diameter -Measuring range: 35-50 mm -Measuring range: 50-70 mm -Measuring range: 70-100 mm -Measuring range: 100-145 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Including case -Weight 0.8 kg Ledpeb A Sx Sjfx Aanota

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm Ledpfx Ajw Rv Ahsanota - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: good (used), For sale is an external cylindrical grinding machine of the brand VEB Werkzeugmaschinenbau and of the type SU 200/1x800 The machine is fully functional and ready for immediate use Ltjdpsrdf Hgjfx Aansa Technical data Grinding diameter: 200 mm Sanding length: 800 mm orbital diameter: approx. 160 mm Headstock speed: 200-1000 1/min Headstock: MK2 Grinding wheel diameter: approx 330 mm Table size: 900 x 200 mm Dimension: 3050x1300x1430 Weight: 4.6 tons On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2004, gebraucht 2004 050078 Jänner 2026, Zwischenverk Taiwan 19700 € 1 810 mm 630 mm 800 x 400 mm 800 x 400 mm 850 mm 900 mm 5 - 25 m/min 3 - 32 mm 405 mm 0,001 - 0,04 mm 1450 1/min 3,7 kW 3350 mm 1730 mm 1930 mm 2900 kg 355 x 50 x 127 mm Automatic vertical feed Electro-magnetic chuck 1 NEW grinding wheel flange Ltedjxvivdopfx Aanja 1 NEW grinding wheel Coolant system with paper filter Automatic dressing device above the grinding wheel with NEW diamond NEW balancing stand NEW covers for the cross guides Operating manual in English with EC declaration of conformity

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. Ledpfjgllxgsx Aansta The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Ledpfx Ajwhqploanota

Condition: good (used), Grinding wheel, double bench grinder, surface grinder, cylindrical grinder Ledpsb A Sw Iofx Aansta -Inner diameter: 32 mm -Outer diameter: Ø 250 mm -Width: 8 mm Price: per piece -Quantity: 50x available -Weight: 0.9 kg

Condition: reconditioned (used), functionality: fully functional, Machine characteristics : Lodexyw Ehopfx Aaneta Centre height : 125 mm ( 175 mm with the heights ) Distance between centres : 600 mm Grinding wheel: Diameter 400 mm Width 50 mm Bore 127.0 mm Angular displacement : 270 ° Work piece spindle head: from 20 rpm up to 400 rpm Spindle taper: 5 MT Taper in tailstock: 3 MT Table angular displacement : 10 ° Table speed: stepless up to 6.0 m/min External Grinding wheel motor : 4.0 Kw Workhead spindle motor : 2.2 Kw Machine's weight about : 2700 kg Overall dimensions machine: Length : 2580 mm Width : 1680 mm Height : 1670 mm The machine is fully retrofitted and it includes: - New electric cabinet and new electric diagram - New motor and frequency variator for the workhead - 2 axis DRO - Cooling tank - Geometry made according to the Kellenberger protocol - Lot of accessories

Condition: excellent (used), Drill Bit Grinder Farman FC-80N (4-80mm) Ltsdpox Nkatofx Aanja Grinding capacity: Ø 4 - 80 mm Angle adjustment: 40 - 180º Grinding wheel speed: 2,880 rpm Grinding wheel: Ø 180 mm Machine weight: 400 kg Machine dimensions (LxWxH): 800 x 1,000 x 1,300 mm Scope of supply: - Documentation - 20x spare grinding wheels

Condition: new, Year of construction: 2025, total width: 2,100 mm, total length: 1,260 mm, total height: 2,150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all types of vehicles. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity up to 250 l/min, and an integrated filter drying system. The Master Flash technology utilizes the full benefits of the hydrodynamic method, restoring filter efficiency up to 99.9% compared to the new one. It is completely safe for the monolithic structure of DPF filters. Properly adjusted parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, maintaining the filter's factory characteristics. The pump with chemical sealing and electronics based on components from leading European manufacturers guarantee the highest quality and reliability. The machine is equipped with a filter contamination measurement system (backpressure measurement) and an integrated filter drying system with a temperature range of 70 to 130 degrees Celsius. The filtration system, expanded with a pre-cleaning filter, significantly extends the lifespan of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical interference with the filter structure, restoring its factory performance to 99.9%. TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Max power: 12 kW * Frequency: 50 Hz * Water inlet connection: 1/2” * Water outlet connection: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss, and phase sequence • Filter contamination measurement system • Chamber made of stainless steel AISI 316 • Extended 4-stage liquid filtration system • Two heaters • Integrated drying system with a temperature range from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Set of connection adapters for DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapter Ltodpfxjgllkaj Aanoa • Starter kit of consumables (complete set of filters + 2L XPOWER DPF Cleaner detergent) • Extended 12-month manufacturer warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS - CONTACT US FOR MORE INFORMATION.

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Ljdpswhzg Usfx Aansta Location: Nattheim

Condition: good (used), Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 250 mm -Width: 6 mm Price: per piece -Quantity: 40x available -Weight: 0.6 kg Ltsdeb A Ryfspfx Aansa

Condition: new, Year of construction: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for regenerating DPF/FAP/GPF filters and catalytic converters designed for passenger and delivery vehicles. It has a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The machine's interior is made of stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed-loop system using a hydrodynamic method. The device allows for filter contamination measurement both before and after regeneration, with results displayed in mbar. It features an integrated drying system with temperatures up to 100°C. After regeneration, a final backpressure measurement is taken and provided to the client as a printed report. This comprehensive cleaning process can restore the filter’s factory settings up to 99.9%. Components from leading European manufacturers have been used in the machine’s construction, ensuring the highest quality and reliability. TECHNICAL DATA: • Weight 600 kg • External dimension (L x W x H) 210 x 106 x 215 cm • Chamber dimension 140 x 69 x 107 cm • Tank capacity: 185 litres • Operating pressure 6-8bar • Maximum power 10 kW Ltsdegllwiepfx Aanoa • Water inlet connection 1/2" • Water outlet connection 6/4" • Airflow: up to 390 m3 • Frequency 50 Hz • Hypertension up to 340 mbar • Safety features: temperature sensor, pressure sensor, door opening sensor, emergency safety switch EQUIPMENT: • 7″ color touch screen • sensors: liquid level, liquid and air temperature, pressure flow, door opening, disappearance and phase sequence • protections: emergency safety switch, end protections of the chamber door • filter contamination measuring system • AISI 316 stainless steel chamber • extended 3-stages liquid filtration system • integrated drying system in a smooth temperature range from 70 to 100 ° C • cooling the drying system • integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • set of connection adapters for DPF / FAP / GPF / KAT / SCR filters • starter kit for consumables (a set of filters + 2L XTON DPF Cleaner detergent) • liquid tank with a capacity of up to 185 liters • extended 12-month manufacturer’s warranty (optional 24 or 36 months) ADDITIONAL OPTIONS: • automatic double-sided filter cleaning • a second fluid circuit with an additional pump • thermal insulation of the liquid tank • automatic liquid top-up • automatic dosing of chemicals • quick-X filter mounting system • EURO5 and EURO6 adapter

Condition: excellent (used), Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 50 mm -Outer diameter: Ø 200 mm -Width: 40 mm -Number: 12 grinding discs available Price: per piece -Weight: 2.1 kg Ltedpfsb A Ni Ajx Aansa

Condition: good (used), Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 250 mm Ltedpsb A Swzofx Aanea -Width: 8 mm Price: per piece -Quantity: 100x available -Weight: 0.6 kg/piece

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling device, cooling unit -Manufacturer: Cloos, cooling unit for TIG welding machine -Type: unfortunately no type designation -Flow rate: l/min -Quantity: 2x cooling device available -Price per piece Ltjdoqgi Idspfx Aansa -Dimension: 620/310/H235 mm -Weight: 15 kg/pc.

Condition: good (used), Temperature measuring device, temperature measuring instrument, temperature measuring device, digital thermometer Ljdpfxek Egkpe Aaneta -Manufacturer: testo, Digital thermometer with sensor -Type: 735-1 .: Measuring range: -200 to 800 °C -Sensor: Cardboard dimensions: 310/150/H105 mm -Weight: 0.8 kg