Used Internal Grinding Spindles for sale (22,981)

Condition: good (used), High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: internal grinding spindle Nedpfoizk Rzox Advecp -Drive motor: BBC 1.5 kW / 2870 rpm -Spindle speed: approx. 9800 rpm -Shaft axis: adjustable max. height 460 mm -Recording/Dimensions: see photos -Total dimensions: 730/400/H535 mm -Weight: 105 kg

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm Ncodpfx Adjw Intasvep --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: ready for operation (used), Grinding wheel Ø: approx. 175/190 mm Grinding wheel width: 30 mm Grinding wheel speed: 2800 rpm electr. Connection: 380 V, 0.6 kW Space requirement: 670 x 400 x 1140 mm Njdpefnbgyjfx Advscp Weight: approx. 120 kg

Condition: excellent (used), Diameter: 400mm Length: 500mm Nedpfxeyt Sqas Advocp

Condition: like new (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 23435, workpiece weight (max.): 100 kg, grinding depth: 500 mm, center height: 380 mm, center height in crank: 500 mm, total width: 1,590 mm, total length: 2,300 mm, total height: 2,050 mm, spindle speed (min.): 120 rpm, spindle speed (max.): 120 rpm, grinding length: 500 mm, overall weight: 7,000 kg, rotational speed (max.): 120 rpm, rotational speed (min.): 120 rpm, grinding diameter: 120 mm, table speed: 100 mm/min, type of input current: three-phase, workpiece spindle speed (max.): 120 rpm, mount diameter: 150 mm, spindle bore: 450 mm, warranty duration: 24 months, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, center width: 100 mm, grinding spindle speed: 120 rpm, workpiece diameter (max.): 125 mm, grinding spindle motor power: 13 W, clamping diameter: 150 mm, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 350 mm, feed rate X-axis: 150 m/min, feed rate Y-axis: 150 m/min, feed rate Z-axis: 150 m/min, grinding wheel diameter: 150 mm, input voltage: 400 V, power: 13 kW (17.68 HP), inner diameter: 1 mm, outer diameter: 150 mm, collet bore: 12 mm, cone diameter: 1 mm, grinding height: 400 mm, input frequency: 60 Hz, input current: 63 A, grinding wheel speed: 120 rpm, We are offering this almost new Schneeberger gemini NGM internal and surface grinding machine, manufactured in 2018. Model: gemini NGM Machine number: 23435 Operating voltage: 3×400 V~ Frequency: 50/60 Hz Max. operating current: 63 A Serial number: SN NGM Year of manufacture: 2018 Ncodpfeynzinex Advep If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1986, Inner diameter: 20…400 mm Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Nodpfx Adoyw Ib Djvjcp Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: excellent (used), Year of construction: 1994, Description to follow! Ncjdpfxsyrtwre Advep

Condition: excellent (used), Year of construction: 1985, Description to follow! Nedpoyrtvzofx Advjcp

Condition: excellent (used), grinding length: 500 mm, The machine is in good condition. Ncjdpfxjx N A Ago Advop

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Ncedpfx Adeyrnmzsvep Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: used, Year of construction: 1952, 220 mm ja weight of the machine ca. 1,4 t Ncjdpfx Adsyn R Nwevjp

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 052 249, grinding depth: 250 mm, center height: 260 mm, total width: 1,340 mm, total length: 3,455 mm, total height: 1,710 mm, spindle speed (min.): 3,600 rpm, spindle speed (max.): 40,000 rpm, grinding length: 1,000 mm, overall weight: 3,000 kg, rotational speed (max.): 40,000 rpm, rotational speed (min.): 3,600 rpm, grinding diameter: 200 mm, table speed: 10,000 mm/min, workpiece spindle speed (max.): 40,000 rpm, feed rate X-axis: 6 m/min, input voltage: 380 V, power: 15 kW (20.39 HP), The Voumard 5A LP1000 is a universally applicable internal and face grinding machine designed for high-precision grinding tasks in toolmaking, mechanical engineering, as well as single-part and small-batch production. Njdpfxjyvg Elj Advocp The machine enables internal, face, and plunge grinding, impressing with its robust construction, high accuracy, and versatile applications. Thanks to its automatic grinding cycles, it is suitable for both manual and semi-automatic operations. The specified price is exclusive of disassembly, packaging, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Njdpfx Aewhqprodvjcp

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Njdpswhqplofx Advscp

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Nodsrntirspfx Advecp Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: used, Year of construction: 2009, internal diameter max. 600 mm grinding depth max. 800 mm grinding length max. 600 mm control Siemens 840 D grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm workpiece length - max. 380 mm external grinding length max. 600 mm travel - x1 axis 150 mm travel - z1 axis 1100 mm travel - x2 axis 470 mm travel - z2 axis 800 mm workpiece spindle 8,5 kW turning speed range - stepless 1-795 U/min Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of the internal grinding spindles (infinitely variable) Nodpowp S Tnsfx Advscp Belt-driven grinding spindles: 7.5 kW - Grinding block mounting hole (diameter): 100 mm / 125 mm - Mounting length of sanding block: 220 mm - Sanding diameter: max. 600 mm - Sanding depth: max. 800 mm External and surface sanding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel distance (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of the external grinding spindles: 7.5 kW - Grinding block mounting hole: Ø 140 mm - Sanding diameter: max. 800 mm - Sanding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm

Condition: good (used), Year of construction: 1996, machine/vehicle number: T1000214, Manufacturer: Tripet Model: TST 100 (CNC) Machine Type: Internal Cylindrical Grinding Machine Year of Manufacture: approx. 2001–1993 (depending on specific machine) Weight: approx. 3,500 kg 📊 Machining / Grinding Data Max. Internal Grinding Diameter: approx. 0.5 – 50 mm Max. Grinding Length: approx. 100 mm Max. Grinding Depth: approx. 100 mm Workpiece Outer Diameter (reference): up to approx. 100 mm Workpiece Spindle (B-axis) – max. load: 25 kg Workpiece Spindle Speed: approx. 45 – 1,600 rpm Roundness Accuracy: < 0.0005 mm ⚙️ Axes & Movements Z-axis (Axial Movement): • Travel: approx. 350 mm • Drive: Indramat AC motor • Feed rate: 0 – 9 m/min • Resolution: 0.0005 mm U-axis (Radial Workpiece Movement): approx. 100 mm X-axis (Radial Grinding Head): approx. 50 mm B-axis (Swivel of Surface Grinding Headstock): manual −30° / +60° 🌀 Spindle Data Grinding Spindle (Standard): Type: Fischer HJN 1028 Diameter: approx. 100 mm Max. Speed: approx. 28,000 rpm Drive Power: approx. 3 kW Operating Range: approx. 2,000 – 6,000 rpm 🖥️ Control System CNC Control, depending on version: • TRIPET NUM 750 or Brüsch TPS 3000 🔧 Additional Components Hydraulic Unit: • Pump 2.2 kW, Pressure approx. 35 bar, Max. flow 20 l/min Ncedpfxsym Ttpo Advjp • Tank approx. 60 l (self-regulating pump) Coolant System: • Pump 0.27 kW • Pressure approx. 2 bar, Flow approx. 12 l/min • Tank approx. 130 l

Condition: used, Multi-speed machine with flexible shaft BIAX type MB 4-2 Machine no. No. 9/50/55 Year of construction approx. 1970 Length of the flexible shaft: 2 meters Speed: 900 - 9000 rpm infinitely variable Motor speed: 3000 rpm Motor power: 1.2 kW = 1.5 HP Mains connection: 380 Volt, 50 Hz Nodpsfim Tiefx Advocp - Handle straight grinder with collet Ø 6 mm - Swivel and rotatable base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 Weight: approx. 80 kg good condition Universal for milling, grinding and polishing work

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, 1 Internal and Surface Grinding Machine Manufacturer: WEMA Glauchau Model: SI 6/1 AS-Nx500 Year of manufacture: 1989 Grinding depth: 500 mm Workpiece spindle speed range: 40 – 400 rpm Ncsdpfsyn D Imox Advjp Distance from workpiece spindle flange to grinding spindle carrier: 1450 mm Adjustment travel of internal grinding device: 530 mm Max. workpiece diameter: 500 mm Distance from workpiece spindle flange to steady rest: 280 – 650 mm Internal grinding diameter: 40 – 400 mm External grinding diameter: 400 mm Rapid traverse: 10 m/min Grinding feed rate: 0.1 – 8 m/min Machine weight: 6.5 t.

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons Ncsdpfoym Tuasx Advjp

Condition: excellent (used), Hydraulic with semiautomatic cycle Internal grinding diameter 5-200 mm Grinding depth 250 mm Ncsdpfxjylbhxj Advsp Workpiece spindle head center height 180 mm Spindle bore 50 mm Table travel -600 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, voumard Njdpfxotzarno Advecp

Condition: used, Year of construction: 1966, Voumard 3A Ncjdpfx Adot D Uxyjvop 1966 YEAR

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Nodpfx Ajyh R Uwodvscp Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, overall weight: 5,900 kg, power: 12.5 kW (17.00 HP), Type: Internal and surface grinding machine Manufacturer: GLAUCHAU Model: SIP 400x500 Year of manufacture: 1975 Condition: Well-preserved Control: Conventional Location: Soni Machines e.K. Country of origin: Germany Availability: Immediate Freight terms: Ex works Used GLACHAU SIP 400x500 internal and surface grinding machine TECHNICAL DETAILS Internal diameter: 800 mm Grinding depth: 500 mm Swing diameter: 850 mm Total power requirement: 12.5 kW Machine weight: 5,900 kg Installation dimensions: 4000 x 1780 x 2400 mm 1. TECHNICAL DATA Maximum workpiece weight: 1,000 kg Spindle head: DIN 55021 Equipment and accessories: - Coolant system with magnetic separator - Leveling pads (machine shoes) - Various grinding wheels - Diamond dressing tool - Face grinding wheel - Internal and surface grinding attachment Ncodpfx Adjyl Tfievep - Halogen machine lamp - Machine documentation