Used Internal Probe for sale (9,741)

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans Hjdpfx Ajztwx Usbtst For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: new, Year of construction: 2026, CKT 560 × 1500 CNC Metal Lathe is a professional industrial solution combining advanced CNC technology with a robust machine structure, designed for production facilities requiring the highest standards of machining quality. This industrial CNC lathe enables a wide range of complex operations, including external and internal turning, spherical turning, threading, drilling, grooving, and contour machining. Key Features Exceptional machining accuracy – maximum swing over bed of 560 mm, swing over cross slide of 340 mm, and a 430 mm wide bed ensure high rigidity and precision during demanding operations. Flexible spindle system – spindle speed range of 100–800 RPM and a 75 mm spindle bore (optional 90 mm) with an A2-11 spindle nose allow machining of a wide variety of materials, from steel to lightweight alloys. Intuitive CNC control – Siemens Sinumerik 808D control system with Polish-language interface and Siemens servo drives provides a dedicated operating mode for conventional lathe users, reducing the learning curve for CNC operation. Rigid construction – with a net weight of 3600 kg and dimensions of 3770 × 1500 × 1900 mm, the machine provides excellent stability when machining workpieces up to 1500 mm in length. Efficient tooling system – an 8-position turret (optional 6-position) with 25 × 25 mm tooling enables fast tool changes and reduces production cycle times. Fast setup and adjustment – allows convenient tool setting, work zero positioning, and corrections without the need to write complete CNC programs, making it ideal for single-piece and small-batch production. Enhanced operator safety – controlled rapid movements and spindle speed limitations enable precise and safe machine operation. Extended component life – automatic lubrication of gears and guideways reduces wear and ensures long-term reliability. Optimized cooling system – maintains thermal stability and protects tools and workpieces during intensive machining. Hedpfxei Apf To Abtst Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries, for both serial and small-batch production. Energy-efficient performance – the 11 kW main motor provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring detailed G-code knowledge. Advanced automation options – available with hydraulic chuck, hydraulic tailstock, bar feeder, and chip conveyor systems. Machine customization options – available upgrades include Fanuc Oi-TF, Siemens Sinumerik 828D, tool probes, and CAD/CAM software integration. Standard Equipment Siemens Sinumerik 808D CNC control Siemens servo drives Manual 3-jaw chuck 8-position turret Complete set of soft jaws Manual tailstock Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual EC Declaration of Conformity Technical Specifications Specification Value Swing over bed 560 mm Swing over cross slide 340 mm Maximum workpiece length 1500 mm Spindle speed range 100–800 RPM Spindle bore 75 mm (optional 90 mm) Bed width 430 mm Spindle nose A2-11 Number of tools 8 Tool size 25 × 25 mm Tailstock taper MT5 Maximum tailstock travel 150 mm Main motor power 11 kW Machine dimensions (L × W × H) 3770 × 1500 × 1900 mm Net weight 3600 kg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Spindle speed: 12,000 rpm Tool interface: CAT40 Hodpfozl Rzysx Abtjt Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: good (used), Year of construction: 2016, operating hours: 9,656 h, functionality: fully functional, machine/vehicle number: H10327, travel distance X-axis: 1,020 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, torque: 89 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, overall weight: 9,100 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 9,462 h, coolant supply: 30 bar, spindle motor power: 14,000 W, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, For sale is a Takumi H10 CNC milling machine from the year 2016. The machine is in good used condition and has been regularly used in production. Equipped with a Heidenhain iTNC 530 control, an HSK-A63 spindle with 15,000 rpm, and a 30-position tool changer, the machine is ideal for precise machining and, in particular, for tool and mold making. The machine also features internal coolant (IKZ) and a Renishaw measuring probe. Hodsztz Aqepfx Abtst Technical data: Manufacturer: Takumi Model: H10 Year of manufacture: 2016 Control: Heidenhain iTNC 530 Spindle speed: up to 15,000 rpm Tool holder: HSK-A63 Tool changer: 30 positions Internal coolant (IKZ): included Measuring probe: Renishaw Operating hours: approx. 9,656 h Weight: approx. 9.1 t Condition: good, with corresponding signs of use Location & loading The machine is located in Bad Lippspringe and can be inspected by appointment. Loading on-site is possible. An inspection before purchase is strongly recommended. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, mileage: 44,528 km, power: 125 kW (169.95 HP), first registration: 07/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,228 mm, loading space width: 2,018 mm, loading space height: 400 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale reserved! Internal number: 1226. MM58288 ----EQUIPMENT * Weight reduction to 3,500 kg GVW - Tachograph, 2nd battery and non-deactivatable 90 km/h speed limiter removed * Tow hitch, fixed - 13-pole including trailer stabilization (TSC - Trailer Sway Control) * Rear view camera with separate screen * Package: Visibility Package I - Exterior mirrors, electrically adjustable, heated - Windshield, heated - Windshield washer fluid sensor * 2 batteries, individual option / cold start package (-29 degrees) * Transmission: 6-speed manual transmission * Anti-lock braking system (ABS) with electronic brake force distribution (EBD) * Axle load increase - front to 1850 kg * Airbag, driver's side * Exterior mirrors, long arm - with integrated turn signals * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat Hodpozt Uc Dsfx Abtet * Roof, overhead storage compartment in the front * Headliner in the driver's cab * Roof marker lights * Tachometer * Electronic Stability Program (ESP) with traction control (TSC) - Hill start assist - Crosswind assist - Emergency brake assist - Rollover protection - Emergency brake support incl. hazard warning lights - additionally with trailer stabilization only in conjunction with a trailer coupling * Lane keeping assist and driver fatigue warning and automatic high beam - Windshield, heated - Headlight assist with day/night sensor - Windshield wipers with rain sensor * Power windows, front - with quick-down/up function for the driver's side * Ford Easy Fuel - convenient fuel filler cap and misfueling protection * Generator, high-performance version * Cruise control incl. leather steering wheel * Glove compartment with lockable lid * Interior lighting with delay function with reading lights in the front * Air conditioning, front incl. dust and pollen filter * Fuel tank 70 liters * Paint: Solid color * Leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Active emergency brake assist and Pre-Collision Assist * Particulate filter: Diesel particulate filter * Platform body: Standard platform body (wide) - Front panel extension, securing straps for tailgate * Radio: Audio system 17: Ford audio system with 4" multifunction display and DAB/DAB+ - Connected Radio (FM/AM) - 4" TFT multifunction display (10.16 cm screen diagonal) - Four speakers, antenna - Integrated control panel and audio remote control on the steering wheel - Bluetooth, USB connection and hands-free system - with digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - FordPass Connect incl. Live Traffic and Wi-Fi hotspot (up to 4 G/LTE, for up to 10 mobile devices) - Emergency call assist * Windshield wipers with rain sensor - incl. headlight assist with day/night sensor * Wheels: Twin tires * Headlights with static cornering lights * Headlight, low beam with delayed switch-off * Power steering * Seat belts - Seat belt pretensioners and force limiters, front - Warning system for unfastened driver's seat belt * Seats: Seat Package 13 - Driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion inclination, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Tray integrated in the double passenger seat (foldable out) - Inside armrest for driver - Lumbar support, manual (driv

Condition: used, mileage: 39,986 km, power: 121 kW (164.51 HP), first registration: 04/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,228 mm, loading space width: 2,018 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale reserved! Internal number: 1390. RA88215 ----EQUIPMENT * Battery: AGM deep-cycle high-performance battery - 2 AGM batteries - standard battery is replaced with AGM, including extended battery life to 30 minutes * Weight reduction to 3,500 kg GVWR - tachograph, 2nd battery, and non-deactivatable 90 km/h speed limiter are removed * Tow hitch - fixed, 13-pin socket - including trailer stabilization (TSC) * Omission: Tachograph, digital, including removal of 2nd battery * Tipper body * Technology Package 24 - windshield, heated - windshield wipers with rain sensor - active emergency braking assist (camera-based) - lane keeping assist with driver drowsiness warning and high beam assist, additionally with lane departure warning - headlight assist with day/night sensor - cruise control - reversing camera and preparation kit - Ford audio system with 4" multifunction display * Battery: Extended battery life, programming of battery life to 30 minutes * Transmission: 6-speed manual transmission * Anti-lock braking system with electronic brake-force distribution (EBD) * Axle load increase - front to 1850 kg * Driver's airbag * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Exterior mirrors, short arm - with integrated turn signals * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat Hjdpfxozt Ucwo Abtet * Roof, overhead storage compartment at the front * Headliner in the driver's cab * Tachometer * Electronic Stability Program (ESP) with traction control (TSC) - hill start assist - crosswind assist - safety brake assist - roll-over protection - emergency brake assist including hazard warning lights - additionally with trailer stabilization, only in conjunction with a tow hitch * Front electric windows - with quick-down/up function for driver's side * Ford Easy Fuel - comfort fuel filler flap and misfueling protection * Generator, high-performance version * Headlights, low beam: Halogen headlights with daytime running lights * Glove compartment with lockable lid * Interior lighting with delay function with front reading lamps * Front air conditioning including dust and pollen filter * Fuel tank 70 l * Radiator grille: 3 bars and surround in black-gray plastic * Paint: Solid color * Steering wheel: Synthetic leather steering wheel * MyKey key system - individually programmable second key * Fog lights * Particle filter: Diesel particulate filter * Flatbed body: Standard flatbed (wide) - front bulkhead extension, retaining straps for tailgate * Wheels: Twin tires - 6 J x 16 steel wheels with 195/75 R 16 tires - including spare wheel, front axle load increase to 1,850 kg, and roof marker lights * Power steering * Seat belts - seat belt pretensioners and force limiters in the front * Seats: Seat Package 13 - driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) - double co-driver's seat with storage compartment under individually foldable seat cushions - headrests, height-adjustable - tray integrated in the double co-driver's seat (foldable) - interior armrest for driver - lumbar support, manual (driver's seat) - seat upholstery: fabric * Start-stop system * Tachograph, digital - including 2 batteries * Recirculation mode * Immobilizer * Heat-insulating tinted glass * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possibl

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Hsdszukv Njpfx Abtst Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,716 h, load capacity: 20,000 kg, lifting height: 3,300 mm, fuel type: gas, mast type: simplex, construction height: 3,300 mm, fork carriage width: 1,900 mm, empty load weight: 22,100 kg, total length: 3,800 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift – internal combustion engine Load center: 500 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Hodpfx Aszuhfusbtjt Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this MAXEIN DWB 200/500G. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Side shifter, fork positioner, Heater, full cabin

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment Hjdozuaprspfx Abtst 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm weight of the machine ca. 18000 kg total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Number of tools: 80 Tool holder: HSK-A63 Hedpex Tu Suofx Abtst Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Spindle 2 – Right Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Specifications: Hsdpfxszunpte Abtjt Capacity: 1,900 L Type of stainless: AISI 304 Internal Pressure: -1 bar Internal Temperature: 100°C Jacket Pressure: 2 bar Jacket Temperature: 135°C Legs/Lugs: Legs

Condition: good (used), The scope of delivery includes: 1x bracket for rear wall grid, used Material color: hot-dip galvanized Internal designation: Variant 1 Diagonal length: approx. 410 mm Total width: approx. 90 mm Overhang: approx. 225 mm Hodpfjzuyr Hsx Abtet Material thickness: approx. 3.00 mm Weight/piece: 0.71 kg 2 elongated holes: 50 x 9 mm (W x H) Height: 30 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, CNC cylindrical grinding machine Lizzini IG-FL Year of manufacture: 2019 Condition: Absolutely like new Control system: Siemens 840D sl Equipment: - 2 external grinding wheels - 1 internal grinding attachment with C-axis and fully controlled B-axis Distance between centers: 1000 mm Distance between centers (vertical): 200 mm Hodezmhumspfx Abtet

Condition: ready for operation (used), SLF Fraureuth MF 170-24/19-101.1 motor spindle for internal grinding, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsdpfx Abjzu E Slstet

Condition: used, mileage: 62 km, power: 125 kW (169.95 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,025 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,981 mm, loading space length: 3,002 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1017. K004825 ----EQUIPMENT - Airbags: Side airbags, curtain airbags - Trailer hitch: Preparation (cable) - Exterior mirrors, electrically adjustable and foldable, heated - Glove compartment with damped flap closure - Heated rear window - Rear window wiper with rear window washer - Air conditioning - Fuel tank with a capacity of 70 liters - LED headlights - LED rear lights with exclusive light signature - Steering wheel: Multifunction leather steering wheel - Mobile phone interface with inductive charging - Engine: Manual DPF regeneration - Package: Exterior package - Package: Driver Assistance Package Plus - Package: Driver's cab seat package 47 "fabric" - Mud flaps, front and rear - Safety interior mirror, manually dimmable - Socket: 230V sockets, 400W - Partition made of metal, high - Interior trim level Life for vans - Door: Rear hinged doors - USB sockets (2x) - Front center console - Central locking + keyless start with Safe-Security - 4 speakers - 4-way adjustable driver and passenger seat - ABS - Airbag: Airbag for driver and passenger - Exterior mirrors, electrically adjustable and heated - Exterior mirror housings and door handles in black - Batteries: AGM vehicle battery 80 Ah - Brake light, third - Roof console, small - Digital cockpit - Tachometer - Three-point seat belts in the front - ESP - Parking assistance system in the rear area - Sliding door step, plastic - Entry handle on the passenger side - Single-tone horn - Electrical connection strip, 12-pole - High beam assistant "Light Assist" - Windshield in laminated safety glass - GVW: Permissible gross vehicle weight 2940 - 3025 kg - Warranty: 5-year factory warranty for DEU - Generator 230 A - Speed control, intelligent speed assist - Transmission: 8-speed automatic - Grab handles on the roof frame - Glove compartment with flap - Tailgate - Heating and ventilation system in the driver's cab - Interior trim: Side trim - Headrests (in the driver's cab) - LED 2-lights in the roof of the cargo/passenger compartment - LED headlights, daytime running lights - LED lights for the driver's cab - LED rear lights - Paint finish: Solid color - Steering wheel: Multifunction steering wheel - Headlight range adjustment - Center console, narrow - Mobile phone interface - Driver drowsiness detection and distraction detection - Emergency brake assist with pedestrian and cyclist detection - Emergency call system eCall - Package: Exterior package - Package: Driver's cab seat package, checkered fabric - Wheel arch cover - Radio 33 cm (13") touch color display - Tire pressure monitoring system - Diesel particulate filter and AdBlue system - Sliding door on the passenger side - Mud flaps, front - Power steering - Seats: Passenger seat - Lane keeping assist "Lane Assist" - Bumpers, front and rear in black - Partition made of metal, high - USB in the driver's cab (2) - First-aid kit, warning triangle and 2 warning vests - Traffic sign recognition and wrong-way driving warning - Tie-down points for securing cargo (8) - Prepared for VW Connect - Immobilizer, electronic - Heat-insulating glazing - Central locking + keyless start without Safe-Security - Registration: Complete vehicle registration ... and more ----The vehicle is not detailed! Delivery throughout Germany possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Hjdpfx Abjy N Ifmstot Financing / leasing possible even without a down payment! Do you ha

Condition: new, functionality: fully functional, power: 205 kW (278.72 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH COMPACT-120 fully automatic concrete plant is a compact concrete production facility designed to offer high production capacity even in limited land conditions. Thanks to its reduced dimensions, it requires minimal space, yet delivers equivalent performance to stationary plants with a production capacity of 120 m³/h. This feature makes it an ideal solution, especially for urban projects, narrow construction sites, or projects requiring frequent relocation. The COMPACT-120 concrete plant can be manufactured with linear or square aggregate bunker options according to user needs. This allows for flexible use in both fixed and mobile plant concepts. Manufactured in compliance with CE standards, the plant offers significant cost advantages to businesses with its quick assembly, easy transportability, and low infrastructure requirements. Steel-legged cement silos eliminate the need for concrete foundations, while the aggregate feeding ramp can be conveniently prepared using a metal wall system. Hodpfjxp U Ilex Abtjt The 3 m³ capacity twin-shaft mixer used in the production line provides homogeneous mixing quality, while the plant's entire automation system is equipped with high-end components from SIEMENS and SCHNEIDER. The PLC-controlled system, with its advanced software interface, provides operators with ease of use and maximum control. COMPACT-120 Compact Concrete Plant Technical Specifications Production Capacity: 120 m³/h Weight: 55 tons Total Motor Power: 205 kW Electric Generator Requirement: 300 kVA Mixer Type: Twin-Shaft Mixer Working Area: 600 m² Aggregate Storage Bunker: 4 x 30 m³ Aggregate Weighing Bunker: 4.5 m³ Aggregate Weighing Belt: 1,000 x 11,100 mm Aggregate Transfer Bucket Volume: 6 m³ Mixer Wet Concrete Volume: 3 m³ Cement Weighing Bunker: 1,800 kg Water Weighing Bin: 1,000 liters Additive Weighing Bin: 100 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options between 100 and 500 tons Control Type: Fully Automatic Why Should You Choose the COMPACT-120 Concrete Plant? CONSTMACH COMPACT-120 combines high production capacity with a compact design to offer investors maximum efficiency. With its low operating costs, easy installation, and portability, it is the perfect solution for both short-term and long-term projects. This plant, with all components from world-class brands, is designed for long-lasting and uninterrupted production. Offered with the CONSTMACH guarantee, the COMPACT-120 combines quality, durability, and engineering excellence in a single structure. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Year of construction: 2022, operating hours: 3,955 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 13 kVA, torque: 83 Nm, controller manufacturer: SIMENS 828D OP, workpiece weight (max.): 600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,955 h, number of spindles: 1, number of slots in tool magazine: 24, We are selling a very well preserved DMG MORI M1 CNC milling center, year 2022, with only 3111 hours of operation. The machine is in excellent condition and can be tested before purchase. Technical details: X-Travel 550 mm Y-Travel 550 mm Z-Travel 510 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min Feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid Motion -Longitudinal/Cross/Vertical 30 m/min No. of tools in magazine 20 Workpiece diameter at full load 80 mm Workpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg Table load 600 kg spindle drive 9 / 11 kW control SIEMENS 828D total power requirement 30 kVA Additional information Hjdpfowl N Tqex Abtjt cnc SIEMENS 828 D Chip conveyer Cooling throug the spindle 20bar RENISHOW Measuring probe Tool taster

Condition: used, Magnetic Separator, Eddy Current Non-Ferrous Separator, Metal Sorting Conveyor, Magnetic Separator, WAGNER MAGNETE 0428-25/60, used machine Hedpfx Aozv S A Tebtet Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 284956 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 650 mm Overall dimensions: 2480 × 1850 × 1040 mm Design / Material: Robust industrial steel frame, with high-speed internal magnetic rotor and conveyor belt Conveyable / Separable material: Recovery and separation of metallic and non-ferrous metals (aluminum, copper, brass, bronze) from bulk material flows (waste, e-waste, shredder residue, glass) or any type of material from which magnetic particles/materials need to be separated

Condition: used, Magnetic Separator, Overbelt Magnetic Separator, Ferrous Metal Sorting Conveyor, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 508395 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 600 mm Overall dimensions: 2480 × 1630 × 1100 mm Design / Material: Robust industrial steel frame, with internal high-performance magnetic block and discharge conveyor belt Conveyable / Separable material: Extraction and separation of magnetic ferrous metals (steel, iron, fasteners, structural parts) from bulk material flows (waste, e-waste, shredder residue, glass, construction rubble, wood chips) or any type of material from which magnetic particles/materials need to be separated Hjdpfx Aezv S Naebtst

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: FAGOR, table width: 660 mm, table length: 1,500 mm, table load: 1,200 kg, This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit. Machine Benefits Technical Machine Benefits • Tool storage // tool megazine // tool pocket • Atc • The machine has internal cooling through the spindle 20 bar. Extra Information Hodszvv Elepfx Abtst MACHINE STILL UNDER POWER

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: MATRIX 2, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information. Additional equipment • workpiece and tool probe • mist extraction • oil separator Hedjzvv Akepfx Abtot Machine Benefits Technical Machine Benefits • Cooling through spindle pressure: 15 bar • Number of pallets: 2 • The machine is in very good technical condition. Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, overall weight: 12,000 kg, total height: 2,400 mm, This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Additional equipment • Closed machine frame with an integrated laser unit • Torque drive combined with direct linear drives • Enclosed beam delivery via fiber optic cable • Water-air chiller for machine cooling • Integrated electrical cabinets with internal lighting • Automatic pallet changer (lengthwise installation) • Power supply through TruDisk integrated into the machine • Working area lighting • Wide longitudinal conveyor Hjdpfx Abozvv A Djtjt • Positioning laser diode Machine Benefits Technical Machine Benefits • Positioning accuracy: 0. 05 mm • Laser rated output: 3000 watts Extra Information The LiftMaster is included with the machine. Dimensions Machine Depth 9950 mm

Condition: good (used), Year of construction: 1989, TITAN SC16.000 | 16-Metre Heavy-Duty CNC Vertical Turning Lathe One of the largest vertical turning lathes available on the market — the TITAN SC16.000 is built for the most extreme heavy machining tasks in energy, mining, shipbuilding, and defense industries. EXCEPTIONAL CAPACITY: • Faceplate Diameter: 12,000 mm • Max. Turning Diameter: 16,000 mm • Max. Workpiece Height: 6,000 mm • Max. Workpiece Weight: 400 TONNES CNC & FEATURES: • Full CNC control system • C-Axis available — for milling and complex contouring • Engineered for continuous heavy-duty production IDEAL APPLICATIONS: • Wind turbine bases and flanges • Large ship propellers and stern frames Hodjf Utqmepfx Abtjt • Mining drum bodies • Hydro turbine runners • Nuclear & power generation components • Large pressure vessel heads WHY THIS MACHINE? ✔ Extremely rare — machines of this size are very difficult to find ✔ Fully functional — available for inspection under power ✔ CNC control for modern precision requirements ✔ Export possible — experienced in international logistics for oversized equipment Manufacturer: TITAN | Location: REM Bacau, Romania Contact us immediately — this machine will not last long. Full inspection welcomed.

Condition: used, mileage: 78,315 km, power: 125 kW (169.95 HP), first registration: 04/2021, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,786 mm, loading space length: 3,350 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and omissions excepted! Internal number: 1212. MM37862 ----EQUIPMENT * Airbag (passenger side) * Paint: Metallic Hodpozu D Hzefx Abtet * Visibility Package III - Exterior mirrors, electrically foldable - Lane Keeping Assist with Driver Alert and High Beam Assist - Windshield, heated - High-mounted LED exterior light "Downlight" - Adjustable instrument lighting - Front and rear Park Pilot System - Rearview camera with image display of the rear driving path on the display - Windshield wipers with rain sensor - Headlight Assist with day/night sensor - Washer fluid level sensor * Seat Package 15 - Driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) - Double passenger seat with storage compartment under individually folding seat cushions - Headrests, height-adjustable - Tray integrated in the double passenger seat (foldable) - Seat heating for driver - Seat heating for passenger - Interior armrest for driver - Lumbar support, manual (driver's seat) - Seat upholstery: Fabric * Blind Spot Information System including Cross Traffic Alert (Trend) - Exterior mirrors, electrically foldable * Anti-lock Braking System with Electronic Brakeforce Distribution (EBD) * Axle load increase - front to 1850 kg * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Xenon: Bi-Xenon headlights with static cornering lights, LED daytime running lights including automatic headlight leveling * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, high * Double-wing rear door with 180° opening angle (without windows) * Tachometer * Third brake light * Electronic Stability Program (ESP) with Traction Control (TCS) - Hill Start Assist - Side Wind Assist - Emergency Brake Assist - Rollover protection * Front power windows - with Quickdown/up function for the driver's side * Ford Easy Fuel - Comfort fuel filler and misfueling protection * Generator, high-performance version * Cruise control including leather steering wheel - Steering wheel with audio remote control (operation of the audio system and the on-board computer) * Transmission: 6-speed automatic * Glove compartment with locking lid * Interior lighting with delay function with reading lights in the front * Air conditioning in the front including dust and pollen filter * Cargo area lighting * Cargo area floor: Vinyl flooring "Easy Clean" * Leather shift knob * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency brake assist including hazard warning lights * Front and rear Park Pilot System - additionally with side sensors * Particulate filter: Diesel particulate filter * Radio: Audio System 24: Ford Audio System including Ford SYNC3 with AppLink, DAB/DAB+, navigation system, radio (FM/AM), 8" touchscreen multi-display (20.32 cm), 4 speakers, FordPass Connect WLAN hotspot, integrated control panel and audio remote control on the steering wheel, Ford SYNC 3 with touchscreen (hands-free system with voice control, SMS read/send function, Bluetooth, emergency call assist...), AppLink (enhanced voice control, private mode, support for Android Auto and Apple CarPlay, capacitive touchscreen technology, ...), dynamic navigation, lane recommendation, road map for Western Europe * Alloy wheels * Headlights with static cornering lights * Sliding door entry light automatically activated w

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 350 mm, turning diameter: 360 mm, spindle motor power: 5,500 W, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 7 m/min, total height: 2,000 mm, total length: 2,280 mm, total width: 1,700 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Special Offer – 5% Off! MTP CK6132 CNC 320 LATHE – SIEMENS 828D The MTP CK6132 CNC 320 is a compact and versatile lathe designed for the precise machining of metal components. It performs cylindrical, tapered, internal and external turning, as well as threading, facing, grooving and parting operations. The machine is equipped with an industrial Siemens 828D CNC control featuring a multilingual user interface configured according to the customer’s requirements. The control supports shop-floor and conversational programming as well as 3D machining simulation. It simplifies program preparation, process monitoring and daily operation. The solid cast-iron bed provides stability, vibration resistance and high repeatability. A fully enclosed working area, coolant system, automatic lubrication and working light improve operator safety and comfort. KEY FEATURES Siemens 828D CNC control Multilingual interface configured to customer requirements Shop-floor and conversational programming 3D machining simulation 160 mm hydraulic three-jaw chuck Six-position tool turret Automatic tool-setting probe Automatic central lubrication system Tool coolant system Fully enclosed working area Working and warning lights TECHNICAL SPECIFICATIONS Maximum turning diameter over bed: 320 mm Hsdpfeytrnrox Abtet Maximum turning diameter over cross slide: 110 mm Chuck diameter: 160 mm Spindle bore: 48 mm Spindle nose: A2-5 Maximum spindle speed: 3000 rpm Main motor power: 3.7 kW Tool turret: 6 positions X-axis travel: 350 mm Z-axis travel: 350 mm Rapid traverse X/Z: 8/10 m/min Tailstock quill taper: MT4 Tailstock quill travel: 100 mm Tailstock quill diameter: 52 mm Machine dimensions: 1600 x 1100 x 1680 mm Machine weight: 1000 kg TRANSPORT We arrange machine delivery throughout Europe. Transport costs are quoted individually according to the destination and specific shipping requirements. Collection from our warehouse in Sokołów Podlaski, Poland, is also available. Please contact our sales department for a transport quotation. The MTP CK6132 CNC 320 is suitable for manufacturing plants, toolrooms, workshops, maintenance departments and technical training centres.