NCorrea FP40-40S Gantry Milling Machine

Correa FP-40/40S

Condition: refurbished (used), Year of construction: 1987, functionality: fully functional, turning diameter: 4,300 mm, faceplate diameter: 4,000 mm, Vertical Turning Lathe SC43 CNC, retrofitted and upgraded with CNC Fanuc 0𝑖-TF Plus Made in Romania by TITAN Year of manufacture: 1987 The machine was completely retrofitted in 2026 Main technical data: FACE PLATE DIA. MM 4000 MAX. SWING MM 4300 MAX HEIGHT UNDER THE CROSSRAIL MM 2000 MAX. LOADING ADMITTED KG 18,000 FACEPLATE SPEED RANGE 1-92 RPM FEEDS RANGE MM/ROT 0.05-5 CARRIAGE RAPID FEEDS MM/MIN 2500 MAIN D.C. MOTOR POWER KW 55 SIEMENS WITH SIEMENS DRIVER MACHINE WEIGHT APPROX. 63 TONS The machine has the following brand new components: - New electrical equipment with parts made by Schneider, Shrack, Siemens, with a new cabinet - New control panel - New micro switches - New hydraulic pump and components - New pump for guideway lubrication, and the entire installation was redone - New CNC Fanuc 0𝑖-TF Plus Fjdpfxjy A Iifs Adrjpk 55KW Main motor, Siemens, refurbished in 2018 with Siemens driver The main gearbox was checked and refurbished with new bearings. The machine was repainted. We grant a 6-month guarantee for parts. We can send more photos and a video showing the machine’s precision measurements. Do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, overall weight: 6,100 kg, Machine type: PUMA 2600Y Date of installation: 02/2023 Additional tooling: • Capto C3 straight holder: 2x • Capto C3 angle 90° holder: 1x • ER20 collet chuck Capto: 10x • ER32 collet chuck Capto: 4x • Weldon holder Ø20 Capto: 1x Fpodpsywllyjfx Adrjk • Capto tool rack: 1x • Indexable drill: 1x Ø37 + 1x Ø19.5

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Fpjdpfxeza T A De Adrok Measuring probe Coolant gun Available immediately

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Fsdpfjym Ut Djx Adropk Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Fodpjrpnf Aefx Adrjpk Total power 20 kW Voltage 220/380 V

Condition: good (used), Year of construction: 1993, ELB surface grinding machine Year: 1993 Magnetic table size: 1500x550 mm With automatic downfeed With wheel dresser Paper band type coolant tank Fsdoygtiwopfx Adrspk Lots of grinding wheels

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fodpfx Adexxxbzjropk

Condition: used, Technical Data Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Max. turning height (cross rail support): 1250 mm Max. turning height (side support): 1160 mm Max. faceplate load: 12,000 kg Fjdpfx Adewyn Nteropk Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Fedovu U Itspfx Adropk Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] Fedpfeuhbxaox Adrepk - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention