Used International 1460 for sale (9,012)

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator Lsdpfxod Tidxs Ag Ajaf available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Laodor A D S Espfx Ag Asf Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, functionality: fully functional, New equipment MASS International Laodpfx Ageiz S Htj Asf Z series conveyor belt NDZ Angled conveyor / flow conveyor available for short-term delivery Example as shown in the picture: height-adjustable angled conveyor with adjustable angles NDZ 1 Infeed section 600 mm Ascending section 1300 mm Discharge section 500 mm Working width 250 mm Overall width 305 mm (without motor) height-adjustable discharge height 700 - 1000 mm adjustable angles for infeed and discharge sections adjustable inclination PU belt Color: black L-shaped cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button movable on steerable stop rollers three-part hopper plates for the infeed section The quoted price applies to the NDZ1.

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/lay-down conveyor Angle-adjustable conveyor belt with a hopper in the infeed section available for short-term delivery Example: NI 1 Length 1500 mm Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Movable on steerable swivel casters Optional: Laedpfx Agjh Nyp Uj Asf other dimensions, see standard delivery list dimensions according to customer specifications FDA-compliant belt modified belt speed etc.

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Lasdjuip Ilopfx Ag Aof Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: good (used), For sale is a shaft mixer from Stelzer Rührwerke International GmbH. It is the SM460-DF model. Product data: 1455 RPM 400V 18.5 kW Ledpfefr Icujx Ag Ajaf Shaft length 720mm Impeller diameter 280mm Further data can be found on the nameplate (photo).

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Power: 200 kW Year of manufacture: 2023 Weight: 1980 kg Ljdpfx Agjzgt D Hs Asaf Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), IM Very good condition. Lodpfxow Ebwus Ag Asaf

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control Lsdpfx Agovwbvpj Asaf > Siemens motors > Linear guides > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable Lsdpfed R Atrox Ag Aoaf - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Ljdpfxshg Rcxs Ag Aoaf Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: new, Year of construction: 2026, Angled conveyor belt available in various lengths and widths, as well as different speeds. Ledpfx Agelkdbyo Aoaf - Can be moved on steerable stop rollers. - Angle is adjustable. - Cleat height: 30 mm. - Spring-assisted height adjustment.

Condition: new, Year of construction: 2026, functionality: fully functional, The NPS belt conveyor is for sale. It can be ordered in various lengths and usable widths. Ljdpfxolkda Ho Ag Aeaf - High-quality aluminum profile, anodized, with grooves - Without guide plates - Smooth PU conveyor belt, temperature-resistant from -10°C to +90°C - Mobile substructure, adjustable from 900 - 1300 mm - Worm gear motor, 3 x 400 V, 50 Hz - Constant belt speed of approximately 6.0 m/min - Motor protection switch with 5 m cable & CEE plug

Condition: new, Year of construction: 2026, functionality: fully functional, Z-type belt conveyor, type NDZ, available in various lengths and widths - High-quality aluminum profile, anodized, with grooves - Rubber-coated drive roller - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high - Mobile substructure with adjustable angle - Motor protection switch with 5 m cable & CEE plug Available upon request: - Custom size Lodpfx Ageg Arxvs Aeaf - Timed control - Frequency inverter (€485) - Wavy edge (€492)

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm Lajdpowktn Aofx Ag Aef • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: good (used), Year of construction: 2017, dispersion and UV varnishing sheet size min 152x152 mm max 760x760 mm paper thickness 0.1 - 1.2 mm UV varnish dispersion varnish 120 g/m² without surface treatment and higher 150 g/m² with surface treatment and higher 200 g/m² with surface treatment and higher automatic setting time 5 minutes automatic washing time 10 minutes Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes 8.5” x 11” / 215 mm x 280 mm sheets width 12,700 sheets/hour 12” x 18” / 305 mm x 450 mm sheets width 9,900 sheets/hour 14” x 21” / 355 mm / 530 mm sheets width 8,800 sheets/hour 21” x 30” / 530 mm x 750 mm sheets width 6,300 sheets/hour 28” x 40” / 710 mm x 1020 mm sheets width 5,000 sheets/hour Painting speed 4,600 B2/hour anilox rollers for the machine 3;9;12;18 Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes Laedpfx Aoyv Dm Hjg Asf UV drying IR drying (suitable for dispersion varnish and primer for HP Indigo) kit for processing thin materials varnish application using a chamber doctor blade high feeder 2 independent varnish circuits with automatic washing Anti-Ghost system innovated sheet delivery system

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Ledex Tg Ubepfx Ag Ajaf Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year of manufacture: 2005 Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Condition: – Used – Complete and fully functional system Scope of Delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Lsdpfx Ajyabxyog Ajaf Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: new, New equipment MASS International NPS accumulation conveyor Conveyor belt / accumulation belt available for short-term delivery Accumulation surface without side walls Height-adjustable, mobile on steerable swivel casters Lodpfsizi S Djx Ag Asaf Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Accumulation surface without side walls, therefore full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on steerable swivel casters The quoted price refers to the NPS1. Optional: Dimensions according to any customer request Belt approved for food (FDA compliant) Modified belt speed Frequency inverter for stepless adjustment of the belt speed etc.

Condition: new, Year of construction: 2022, *WAREHOUSE CLEARANCE* *DISCOUNT OFFER* The conveyor belt is from 2022, new and unused. We offer a 1-year warranty. Laedpohy Edvofx Ag Ajf New price from model year 2023: €1,870 L: 2000 mm W: 150 mm Mobile Belt speed: 3 m/min, but can also be adjusted Height adjustable: 840 mm - 1240 mm Additional information: Available with or without guide rails/side walls (height: 60 mm)

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 container from MASS. These are available in various sizes (see pictures). Lsdsip Ucnepfx Ag Aeaf

Condition: new, Year of construction: 2025, functionality: fully functional, The Z-conveyor belt is for sale with the following technical data: Z-belt conveyor Type NDZ - Specifications. Feeding height: 500 mm Ledpew Nrm Hsfx Ag Aeaf Incline belt length: 1800 mm Discharge height: 500 mm Useful width: 600 mm, overall width: 750 mm Cleat height: 30 mm Discharge height: max. 1600 mm, min. 1150 mm Belt speed (constant): approx. 6 m/min Aluminum side guides, 60 mm high Mobile base frame with braked castors Reinforced conveyor belt, temperature resistant from -10°C to +90°C

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Ledpow Nrpbefx Ag Asaf Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Prices are subject to VAT. Laedszvfpmepfx Ag Asf Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Ljdpfozvfpgox Ag Aeaf - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form.