Used International 1460 for sale (9,005)

Year of construction: 2009, condition: ready for operation (used), Offered is a precision internal grinding machine. Grinding range: max. Ø 357mm x 315mm, control system: CNC control system. Equipped with full enclosure, workpiece spindle head, grinding spindle carrier, separate control cabinet, extraction pipe routing. Weight: approx. 5200kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection possible by arrangement. Knodpfxjy Ulm Ee Aklea

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Knedpfx Ajyg Nvteklea

Year of construction: 1979, condition: ready for operation (used), Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible. Kjdpjyln Dtefx Aklona

Year of construction: 1972, condition: ready for operation (used), A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible. Kodpfx Ajy E S Hmsklsna

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Knedpfx Akjx Uq T Dsloa

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Knedpfxoxf Ikfe Aklja

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased diameter and extended, hydraulic transverse movement! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau, and put into operation in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Diameter of workpiece protection ring max.: 800 mm Diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of internal grinding device on the table: max. 545 mm Transverse movement of workpiece spindle stock: max. 650 mm Swiveling of workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Transverse adjustment: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Dimensions & Weight Machine: 4100 x 2200 x 2500 mm Europallet with accessories Coolant tank: 1700 x 800 x 750 mm on Europallet Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Ksdpfx Akjzqcvtelena Fixators or machine feet Various grinding wheels Diamond dresser Large grinding plate Internal and surface grinding device Halogen machine lamp Machine documentation

Condition: used, Internal measuring instrument, 2-point internal measuring instrument set, borehole measuring instrument Manufacturer: Mitutoyo Used Measuring range [mm]: 18-150 Testing equipment in original packaging 2 pieces available, each in the original case Case contents are not complete, missing a dial indicator Price on request All technical specifications are subject to printing errors/mistakes Ksdpfx Akjzul Hvsljna Sale exclusively to countries within the EU.

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Knsdpfx Akeznulbjlsa Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m Knodpfx Aoy Ty Afoklea

Condition: ready for operation (used), JUNG D22 Internal cylindrical & surface grinding machine - Machine suitable for internal cylindrical and surface grinding - Smallest bore to be ground: 14 mm - Largest bore that can be ground: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece speeds: 46 - 270 rpm - Spindle head / Swivels to the right and left, each by 30 degrees - Distance from the spindle axis to the center of the table: 250 mm - Largest distance / Workpiece spindle - grinding support: 935 mm - Work table / Tilts forward/backward, each by 5 degrees - Automatic and manual operation - Steady rest - Three-jaw chuck - Replacement grinding spindles (see photos) Knodsztl Rrspfx Aklja - Coolant system Dimensions: L x W x H 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - Center height : 102 [mm] - Strokes (X/Z) : 450 x 200 [mm] - Max speeds (X/Z) : 12 [m/min] SPINDLE SUPPORT - Spindle number : 2 WORKPIECE HEADSTOCK - Max. workhead speeds : 1500 [rpm] - Spindle clearance : 28.6 [mm] - Power : 1.4 [kW] - Mounting tape r: A2.4/CM5 - Torque : 150 [Nm] - Manual B axis angle : +/- 2 [°] - C axis : 0.0001 [°] POWER SUPPLY - Installed power: 34 [kVA] DIMENSIONS - Floor dimensions : 3600 x 2800 [mm] - Machine weight : 2600 [kg] Kedpouhbmqefx Aklona MACHINE HOURS - Number of hours under power : 26781 [h] EQUIPMENT - Fanuc Oi-TD control - Spindle centre coolant - Cooling unit for spindle cooling - Loading robot - 2 spindles available : 59.600 - 41.600 [rpm] - Dressing turbine

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor Knodpjy E I Awsfx Akloa The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Condition: new, functionality: fully functional, Year of construction: 2026, A 3500 kg capacity diesel forklift is a professional material handling machine designed for intensive industrial, construction, and logistics applications. Thanks to its 3000 mm lifting height mast and pneumatic tyres adapted for operation on demanding terrain, this forklift provides stable and efficient performance under heavy-duty conditions. The robust construction, Nissan K25 engine with 50 HP, and automatic transmission ensure smooth operation regardless of working conditions. Main Advantages of the Machine 3500 kg rated load capacity – enables safe transport of heavy loads, machinery, steel materials, and industrial components. 3000 mm lifting height – ideal for low and medium-height storage operations in warehouses and production facilities. Nissan K25 petrol/LPG engine – a proven power unit offering high efficiency and reliability. Power Shift automatic transmission – ensures smooth operation without the need for manual gear changes. Pneumatic tyres – provide excellent shock absorption and traction on various types of terrain. Side shift mechanism – allows lateral fork movement for precise load positioning in limited spaces. Robust tilting mast – improves stability and safety during load handling operations. Complete work lighting system – enables efficient operation in low-visibility conditions. Construction and Technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to handle maximum loads. The Nissan K25 engine is a well-proven power unit known for its high resistance to overloads and low fuel consumption. The automatic Power Shift transmission provides smooth driving, improving operator comfort and safety, especially during frequent changes of direction. Standard Equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tyres LED work lights Reverse alarm and warning lights Technical Specifications Parameter Value Load capacity 3500 kg Maximum lifting height 3000 mm Fork height when lowered 40 mm Fork length 1220 mm Side shift Yes Mast tilt Yes Engine Nissan K25 Engine power 50 HP Transmission Automatic Driving speed with/without load 12 / 13 km/h Tyre type Pneumatic Overall length 3800 mm (L) Overall length without forks 2580 mm (L’) Wheelbase 1740 mm (L1) Distance from front axle to fork face 487 mm (L2) Fork length 1220 mm (L4) Single fork width 120 mm (W) Overall forklift width 1225 mm (W1) Rear section width 970 mm (W2) Fork carriage width 1000 mm (W3) Outer fork spacing 1060 mm (W5) Maximum lifting height 3000 mm (H) Mast height (lowered) 2120 mm (H1) Mast height (raised) 4250 mm (H2) Fork height from ground 150 mm (H3) Overall height to overhead guard 2090 mm (H4) Mast ground clearance 120 mm (H5) Ground clearance 120 mm (H6) Knedpfxsycvv Sj Aklea Load centre distance 500 mm (C) Rated capacity 3500 kg (Q) Single fork thickness 40 mm (T) Mast tilt angle forward 6% (α) Mast tilt angle backward 12% (β) Weight 4700 kg

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical specifications: - Mobile version with motorized forward/reverse movement + steering - Motorized oscillating stroke, forward/reverse, with speed control - Oscillating stroke, longitudinal, forward and backward - Motorized contact pressure - oscillating pressure adjustment - Grinding belt dimensions approx. 2000 x 50 mm - Contact disc B 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg Knodpfx Aei Apb Nokloa

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Kjdpfxot Hwups Aklena Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Knjdpfxoxyllvo Aklea Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 1984, honing diameter 12 mm stroke 40 mm Knsdpfx Aet Hwvteklsa throat mm total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg Ksdpfxst Hw T So Aklona dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1994, internal diameter 300 mm Knjdsyrtwrepfx Akloa grinding depth 450 mm swing diameter 660 mm

Condition: excellent (used), Year of construction: 1985, internal diameter 300 mm grinding depth 450 mm Ksdpfx Aksyrtvzeljna swing diameter 660 mm

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Kedpfx Aow U U Iqeklsna SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: good (used), Year of construction: 2002, functionality: fully functional, X-travel 450mm, Z-travel 200mm exhaustion device, extinguishing system, without coolant device weight ca. 4000kg Ksdoy Ix Ezopfx Aklona

Condition: not inspected (used), Year of construction: 2023, operating hours: 1,400 h, machine/vehicle number: 180073, grinding depth: 100 mm, grinding length: 100 mm, overall weight: 5,000 kg, grinding diameter: 100 mm, workpiece diameter (max.): 215 mm, feed length X-axis: 400 mm, feed length Z-axis: 200 mm, Control, monitoring, and main data o Control: SIEMENS, type SINUMERIK 840 D SL o Year of manufacture: 2023 o Operating hours recorded: 1,376 Work area o Swing diameter above the W-axis: 215 mm o Grindable bore length: 100 mm o Grindable bore diameter max.: 100 mm o Grindable external length: 100 mm o Length of the part with clamping devices: 200 mm Travel ranges o X-axis: 400 mm o Z-axis: 200 mm Axis speeds o X-axis: 1 - 25,000 mm/min o Z-axis: 1 - 25,000 mm/min Spindle data o C0-axis, workpiece spindle 400 with direct drive o Motor spindle, continuously variable: 0 - 2,000 rpm o Motor power: 5 kW o Workpiece weight including clamping devices max.: 80 kg Kodpfszgcd Nox Aklsna o Internal taper: 5 MK o External centering: 80 g6 mm o Spindle bore: 30 mm o Water cooling: available Operating data o Machine weight: 4,500 kg o Connection values, machine o 3 x AC / 400 V / 50 Hz o Rated power: approx. 34 kVA o Rated current: approx. 49 A Peripherals • Air filter unit, IFS, type IFMC 1800, year of manufacture 2021, serial no. 565760-02 • Cooling unit, HYFRA, type E-CHILLY 5-400V-S, year of manufacture 2022, serial no. 10129303PC01240522, cooling capacity approx. 5,480 m³ / 32° Celsius • Hydraulic unit, LEHMANN UMT, type KSS0119, year of manufacture 2022, own weight approx. 610 kg, consisting of: • Cooling unit, HYFRA, type TRK-CHILLY-45-EF-S, year of manufacture 2022, serial no. 10132616PC01290722 • Chip conveyor, LEHMANN UMT, type FB100, year of manufacture 2022, serial no. AUF007093-1, own weight approx. 80 kg • Magnet unit, LEHMANN UMT, type VMA 100S GM WA, year of manufacture 2022, serial no. AUF007093-1, own weight approx. 60 kg The machine was loaded manually. During automatic loading, a collision occurred.

Condition: used, Year of construction: 2020, operating hours: 38,709 h, machine/vehicle number: IntNr231545, Knsdpfx Aozidmkjklja