Used International 560 for sale (11,177)

Condition: used, tank capacity: 11,320 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Total height: 2,830 mm Total length: 4,400 mm Heating/cooling: available Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Duodpjyckucjfx Afpjn Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Dujdpfx Afsyckt Eopjn Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel Duedpfx Asycktrjfpon

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Dsdpfet Egddex Afpoun Rear discharge conveyor with magnet roll Hydr. self propelled drive (for moving on site) Twin drive separate drives for scraper floor and infeed roller Radio remote control

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Duedpfow Rz Rqjx Afpen Radio remote control

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Business Ready Booklet Maker Finisher for sale. Counter: ONLY 303.889 prints total Dodoygnwpopfx Afpoun This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Please contact us with questions! We will be happy to help you!

Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Djdpfx Afexgtdajpoun Rotor diameter: approx. 560 mm

Condition: good (used), Year of construction: 1986, Inner diameter: 20…400 mm Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Dujdpfx Afeyg E Niepen Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Djdpfx Asvn Rlzjfpoun Quill taper: MT 5 Including chip conveyor Including complete documentation Immediately available from stock

Condition: like new (used), Year of construction: 2022, operating hours: 8,000 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with gas burner. An oil burner can be supplied upon request. The unit is in very good condition, almost as new, with only 8,000 operating hours. Model DG 560. Year of manufacture: 2022. Steam output: 560 kg/h. Max. steam pressure: 13 bar. Complete as shown in the picture. Delivery available at extra cost. On-site inspection possible. Please contact us if you have any questions. Dsdpfoydqurjx Afpeun

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Dujdpfx Ajycimkofpon

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Business Ready Booklet Maker Finisher for sale. Dujdpfxoygc T Se Afpsn Counter: ONLY 345.204 prints total This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Please contact us with questions! We will be happy to help you!

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, Dear Ladies & Gentlemen, Dsdpfxsxn Uuvs Afpjun We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Offsetting Catch Tray for sale. Counter: ONLY 191.972 prints total This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Please contact us with questions! We will be happy to help you!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, empty load weight: 1,450 kg, For sale is a Jumag steam generator with oil burner. Optionally available with gas burner upon request. The unit is in very good condition. Model DG 560. Year of manufacture: 2011. Steam output: 560 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Please contact us with any questions. Dedpfxjydnzie Afpsun

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 2,500 kg load capacity Design and technology The forklift’s construction is made of high-strength materials, resistant to intensive use and outdoor conditions. The reinforced frame and high-rigidity mast ensure stability during lifting and transport operations. The Nissan K25 engine with an output of 50 HP is a well-established unit in the forklift industry, offering strong tractive force, durability, and excellent availability of spare parts. The Power Shift automatic transmission allows dynamic acceleration and smooth direction changes without loss of torque. In addition, the use of hydraulic brakes and support systems enhances operational safety and user comfort. Precision and operational efficiency The mast is equipped with a forward/backward tilt function (angle 6° / 12°), enabling safe and precise handling of loads in various working conditions. The side-shift function significantly reduces operating time by allowing fork position adjustments without repositioning the entire truck. Thanks to pneumatic tires with deep tread and high ground clearance, the forklift performs exceptionally well on uneven terrain, ramps, and loading yards. A travel speed of up to 19 km/h unloaded enables fast execution of handling and transport tasks over large areas. Standard equipment Nissan K25 internal combustion engine Power Shift automatic transmission Tilting mast Side-shift forks Complete work and warning lighting Reverse alarm, strobe light, turn signals 1,220 mm forks with manual spacing adjustment Choose a proven solution for internal logistics. Select the CORMak 2,500 kg forklift with the Nissan K25 engine and Power Shift transmission—contact our technical advisor or order directly online. Technical specifications Load capacity: 2,500 kg Maximum lift height: 3,000 mm Side shift: Yes Mast tilt: Yes Dsdpfjycv A Eex Afpjun Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic (Power Shift) Travel speed (loaded / unloaded): 17 / 19 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,600 mm (L1) Distance from front axle to fork face: 469 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,160 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,024 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,000 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,070 mm (H4) Mast ground clearance: 110 mm (H5) Ground clearance: 110 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 3,680 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Electric forklift truck with a 2,500 kg load capacity and 4,500 mm lifting height Design and technology The forklift is equipped with a modern electric drive that ensures quiet and emission-free operation. The power system is based on a high-performance 48V 490Ah battery, providing up to 10 hours of continuous operation. Compared to lithium-ion batteries, this battery offers up to 40% greater safety—it is resistant to mechanical damage, overheating, and does not emit harmful gases. A stable structure, precise hydraulic system, and a mast made of high-grade steel allow safe handling of loads at full capacity and maximum lift height. The forklift features a soft start system, power steering, and automatic speed reduction while turning, improving machine control and enhancing operator safety. Precision and operational efficiency The side-shift function allows fork position correction without the need to reposition the entire truck. Forward and backward mast tilt enables precise load placement and stable transport. A travel speed of up to 14 km/h and an optimized turning radius of 2172 mm make the forklift highly effective in narrow warehouse aisles. Applications This model is ideal for use in: high-bay warehouses and distribution centers, production plants with high material throughput, industries requiring clean, emission-free operation (food, pharmaceutical, chemical), outdoor loading areas – thanks to pneumatic tires and high ground clearance. Standard equipment Integrated 48V 490Ah battery 70A battery charger Side shift system (lateral fork movement) Tilting mast Full LED work and warning lighting Pneumatic tires with deep tread Audible warning system, turn signals, warning beacon, reverse alarm Technical specifications Load capacity: 2,500 kg Maximum lift height: 4,500 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Battery voltage / rated capacity: 48V / 490Ah Continuous operating time on full charge: up to 10 h Charging time: 10 h Travel speed (loaded / unloaded): 12 / 14 km/h Tire type: Pneumatic Overall length: 3,573 mm (L) Overall length without forks: 2,353 mm (L’) Wheelbase: 1,480 mm (L1) Duodpfx Aoycvxysfpjn Distance from front axle to fork face: 468 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,170 mm (W1) Rear width: 950 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,038 mm (W5) Maximum lifting height: 4,500 mm (H) Overall mast height (lowered): 1,995 mm (H1) Overall mast height (raised): 5,750 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,098 mm (H4) Mast ground clearance: 110 mm (H5) Minimum ground clearance: 105 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Turning radius: 2,172 mm (r) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,015 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,740 mm (L1) Dujdpfeycvv Sex Afpsn Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: good (used), Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe Duodsyaypkjpfx Afpsn -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Condition: used, mileage: 7,81,848 km, power: 412 kW (560.16 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 11,850 kg, maximum load weight: 14,150 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,700 mm, next inspection (TÜV): 03/2026, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Color: White Ivory, unladen weight: 11,850 kg, permissible total weight: 26,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 385/65 R22.5, air suspension, lift axle, retarder: Scania R 3500, digital tachograph, electronic braking system (EBS), automatic climate control, adaptive cruise control (ACC), H7 headlights, radio, Bluetooth hands-free system, adjustable steering column, roof hatch, fog lights, kerb mirror, wide-angle mirror, immobilizer, cooler box, axle load indicator, hill-start assist, LED daytime running lights, 1x15-pin connector, telematics system, SCR engine, Opticruise transmission GRS 905 R, 2-pedal, roof spoiler, full air suspension, wheelbase 4700 mm, 500 l aluminum tank, 75 l AdBlue tank, front axle 8.0 t, headlights integrated in sun visor, HYVALIFT 20.58 S hookloader, steel container, payload 14,075 kg, YS2R6X20005342688. Non-binding offer, subject to errors and prior sale. Images may not match the actual vehicle offered. Dusdpfx Aeyfivqefpen

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, For Sale: WAGNER WDC 560×2000 Lathe – 2012 General Description: Brand: WAGNER (Germany) Model: WDC 560×2000 Year: 2012 Type: High-precision CNC lathe Control: FANUC Oi-TD Applications: Machining of cylindrical, conical, threaded parts and large-sized components for the mechanical engineering, automotive, aerospace, or energy industries. Technical Specifications: • Maximum turning diameter: 560 mm • Maximum distance between centers: 2,000 mm • Center height: approx. 280–300 mm (to be verified per machine) • Cross travel: approx. 550 mm • Spindle: FANUC CNC, variable speed depending on configuration • Tailstock and live center: for machining of long and precise parts • Chuck: 4- or 6-jaw (depending on configuration) Equipment and Features: • FANUC Oi-TD CNC: flexible programming and automatic cycles • Cast-iron guideways for rigidity and precision • Integrated lubrication system and chip tray • Toolholder and modular turret (depending on configuration) • Possible accessories for threading, taper turning or long workpieces Dimensions and Weight: • Machine dimensions: approx. 5.5 × 2 × 2.2 m (L × W × H) • Weight: approx. 7–9 tons Key Highlights: • Large capacity: 560 mm turning diameter × 2,000 mm between centers Dedpfxoyc Tico Afpjun • Reliable and widely used FANUC CNC, easy for maintenance and programming • Robust and precise machine, suited for demanding workshops

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional Leak Testing, Sniffer & Vacuum Operation Description: For sale is a professional helium leak detector Pfeiffer Vacuum HLT 560. The device is designed for highly precise leak detection using helium and is typically used in industry, manufacturing, quality assurance, laboratories as well as technical service. It is suitable for safe detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffer modes. With the sniffer probe, leak locations can be specifically pinpointed, while in vacuum mode, entire assemblies or systems can be tested. An integrated turbopump and forepump make the device a complete, mobile test system. Applications (examples): - Leak testing of components and assemblies - Testing of vacuum chambers, pipelines, valves, heat exchangers - Quality control in production Dedpfx Afeyaxu Sopoun - Service and maintenance work on vacuum equipment Technical Data: Manufacturer: Pfeiffer Vacuum Model: HLT 560 Test gas: Helium Measuring principle: mass spectrometric helium leak detection Operating modes: vacuum operation / sniffer operation Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge port Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 44 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Further questions can gladly be answered for you by phone.

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffer & vacuum modes with backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional helium leak detector, Pfeiffer Vacuum HLT 560. This device is designed for high-precision leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service applications. It is capable of reliably detecting even the smallest leaks. The HLT 560 uses mass spectrometry and can be operated in both vacuum and sniffer modes. With the sniffer probe, leak locations can be pinpointed, while in vacuum mode, entire assemblies or systems can be inspected. Integrated turbopump and backing pump make this unit a complete, mobile testing system. Application areas (examples): • Leak testing of components and assemblies • Testing of vacuum chambers, pipelines, valves, heat exchangers • Quality control in production • Service and maintenance of vacuum technology systems Technical Data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Integrated turbopump Dodpjyaxr Defx Afpoun Backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Test gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum operation / sniffer operation Reference leak rate: (7.4 ±15%) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 465 kW (632.22 HP), type of cooling: air, overall weight: 5,059 kg, total width: 2,300 mm, total length: 4,800 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 560 kW (761.39 HP), Aircooled chiller/Heat pump CARRIER 30RQ0522 0157 PEE 465 kW/560 kW Cooling capacity: 465 kW / 132.22 tons (12/7 — 35°C) Heating capacity: 560 kW / 159.23 tons (40/45 —7°C) Year of manufacture: 2011 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 8 pcs. Danfoss SH300A4ACB (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. + 2 pcs. (Frequency inverter) Dodpfoybbgtsx Afpjun Hydraulic module: 2 pcs. water pump WILO DL65/170(163)-11/2 Carrier, expansion vessel. Dimensions: 4.8x2.3x2.4 m. Weight: 5059 kg. Working hours: 448/457/454/119/835/772/771/760 h. Condition: Good

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: Duodpfxjgigv Ds Afpen 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: like new (used), Year of construction: 2018, machine/vehicle number: IntNr231086, Int. No. 231086 1449 Oil/Emulsion Mist Extraction System AR FILTRATIONI S.R.L. Extraction Series ARNO 2: Mechanical AR 5-stage air purifier for emulsion mist/oil smoke Air flow rate: 2600 m³/h (1.5 kW) Voltage/frequency: 230/400 V, 50 Hz Noise level: approx. 70 dBA Stage 1 – Centrifugal condenser, self-cleaning Stage 2 – Metal mesh filter, washable Stage 3 – Pocket filter Stage 4 – Fine filter mat, washable Stage 5 – HEPA ultra-fine filter Overall unit filtration efficiency: up to 99.97% - Quick and easy maintenance, once per year, high operational reliability Duodpjx U Dhuefx Afpsn - Sturdy construction, minimal space required - Recovery of up to 80% of condensed coolant lubricant - Design and performance in compliance with current standards - Approx. €415.00 in energy savings per air purifier - Reduction of emissions by 9,000 kg CO2/year/unit - Protects sensitive machine tool components - Protects both the environment and personnel Dimensions: approx. 990 x 570 x 1400 mm Weight: approx. 120 kg Short delivery times available by arrangement. The machine can be inspected under power by appointment. Subject to technical modifications, errors, and interim sale!