Used International 986 for sale (10,328)

Condition: excellent (used), IM Very good condition. Crjdow Ebwuspfx Abceh

Year of construction: 2007, operating hours: 100 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: EN 133445-3, A complete line for the production of margarine, confectionery fats, shortening, etc. is sold, with an additional line for milk powder and an automatic CIP rinsing system. It combines equipment from the following manufacturers: CHEMTECH, ALFA LAVAL, TMCI Padovan, O/K Internatsonal, FAVEO, Bortolinkemo, Atlanta, Cidiesse. The plant is located in Chornomorsk. Both lines were installed in 2012, produced one batch and shut down. The equipment needs to be dismantled. More info by phone and presentation on request. Terms of sale: contract, cash on delivery, dismantling and shipment by agreement. Description of margarine production lines Cjdpeu Dmlmjfx Abcjrh Composition of line A. - four 5 m3 tanks for emulsion preparation with stirrers and pumps. The tanks are mounted on strain gauges; - four 50-liter tanks for flavoring and coloring with peristaltic pumps; - main heat exchanger-pasteurizer of 3 sections of plate type; - main piston pump; - block of creamers (C1+C2); - block of creamers (C3+C4); - working module with 2 pin rotors; - working module with 2 pin rotors. A separate option (with the possibility of connecting) in the line is an aging pipe and a molding kempak machine for the production of margarine for puff pastry. Line capacity: 5 tons/hour for industrial margarines, 1 ton/hour for puff pastry margarine. Composition of line B. - two 5 m3 tanks for preparation of emulsion with stirrers and pumps. The tanks are mounted on strain gauges; - one 50-liter tank for flavoring and coloring with a peristaltic pump; - plate-type heat exchanger-fuse; - main piston pump; - block of kemetators (C1+C2); - block of kemetators (C3+C4); - working unit with 2 pin rotors; - working unit with 2 pin rotors. The line capacity for industrial margarines and shortening is 5 tons per hour. Two parallel lines for containerization and filling of margarines consist of:  unit for forming cartons;  unit for lining cartons with plastic film;  station for filling margarines into cartons;  unit for sealing cartons;  printer for printing on cartons. Three tanks for SIR washing are installed to wash the production lines and equipment. The tanks are designed to prepare cleaning solutions and clean water for washing. The washing station is equipped with a pump. All processes of product production, container formation, filling and packaging, and transportation of boxes are automated to the maximum extent possible. The level of automation is PLC plus SKADA. To produce new fatty products, Chemtech International Ltd. supplied a pilot margarine plant with a capacity of 120 kg/h. Function: Production and packaging of margarine, confectionery, culinary and bakery fats, as well as for the dairy industry with a capacity of 12.4 tons per hour or production and packaging of margarine for puff pastry with a capacity of 4.5 tons per hour. Function: Manufacturing and packing of confectionery and bakery fats, and dairy industry with a capacity of 18.6 tons per hour or manufacturing and packing of fats for dairy products, cocoa oil substitutes with a capacity of 12.4 tons per hour. Located in Chornomorsk. Both lines were installed in 2012, made one batch on it and stopped. The equipment needs dismantling. More information by phone and a presentation on request.

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Cjdpfxsw H Naaj Abcjrh Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors Crsdsvwbvpspfx Abcjh > Linear guides > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8 Cedsv E Nwdspfx Abcsrh

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 29-5843, pressing force: 200 t, table length: 3,100 mm, Schiavi Macchine STPC 4-axis press brake (X-R-Y1-Y2), year 1991, used, sold as seen. Optionally, a complete overhaul with new Titano CNC and new front safety device from the manufacturer can be provided. TECHNICAL SPECIFICATIONS STP-C 203 Pressing force: 2000 kN Table length: 3100 mm Distance between uprights: 2520 mm Throat depth: 320 mm Stroke: 200 mm Daylight between tables: 450 mm Number of intermediates: 15 Cedpfx Asw Afrqebcerh Mass: 13,000 kg Approximate overall length: 3900 mm Oil capacity: 150 L Approximate overall width: 1415 mm Approximate overall height: 3000 mm Year of manufacture: 1991 Serial number: 012-5062

Condition: repair required (used), Year of construction: 1999, The machine offers an opportunity for hobbyists or can be used as a spare parts donor. The machine is already disassembled, meaning the body and conveyor belt are separated. The total length of the conveyor belt is approximately 12 m and consists of plastic link chains with supports and side guides, each approximately 120 mm wide. The four Leister blowers (type 5000, rarely used) are separate and functional. A wide range of accessories is included (see also photos). Please contact us if you are interested. The price is ex works and unpackaged. Csdpowmy Eyefx Abcerh

Condition: new, Year of construction: 2018, functionality: fully functional, type of motor: electric gear motor, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Codpswq Rapjfx Abcsrh

Condition: good (used), Year of construction: 1987, functionality: fully functional, Ipsen Industries International GmbH Protective gas generator, G 1500 E Model: G1500E Year of construction: 1987 Technical data: Heating: electric Reaction gas: Propane Gas overpressure min.: 10 mbar Gas overpressure max.: 50 mbar Working temperature min.: 980°C Working temperature max.: 1020°C Total electrical data: Rated voltage: 380V AC, 3-phase Rated current: 60A Frequency: 50Hz Power: 22kVA Electrical data heating: Csdpfx Absudlgtecorh Rated voltage: 380V AC Rated current: 52A Frequency: 50Hz Power: 20kW

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 5 t, filling opening width: 810 mm, filling opening length: 710 mm, bale length: 695 mm, bale width: 510 mm, bale height: 600 mm, total width: 920 mm, total height: 2,410 mm, total length: 940 mm, noise level: 60 dB, power: 1.1 kW (1.50 HP), We have a lot of brand new or used CK International balers CK51, CK101, CK100VX, CK250, CK300VX and more on our stock. Please contact us and to get a quote. Csdpevy Drxjfx Abcsrh

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Csdpfx Abjwhk Dvecerh

Condition: good (used), Year of construction: 2008, functionality: fully functional, Length: 145 cm Cedowb Spgopfx Abcsrh Width: 45 cm

Condition: new, Year of construction: 2024, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm Credjwktn Ajpfx Abcsh • Separator with blades included

Condition: new, New device Credpfsd Tidxjx Abcjh MASS International NS3 Speciale Angle conveyor belt with separator available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Useful width 450 mm Outside width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline PU belt black with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute

Condition: good (used), Year of construction: 1979, functionality: fully functional, Ipsen Industries International GmbH Protective gas generator, G 750 E Model: G750E Year of construction: 1979 Electrical data: Rated voltage: 380V AC Frequency: 50Hz Crodpfxeudlhqe Abcsh

Condition: new, Year of construction: 2025, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) Crsdswktm Ejpfx Abcsh • Programmable control unit with emergency stop button (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch • Side openings for connecting a suction hose • Mixer frame on adjustable telescopic legs with swivel wheels with brake

Condition: new, New device MASS International Angled conveyor belt / Conveyor belt L - Conveyor belt with fixed angle 35° available at short notice MASS International NC1 angled conveyor belt Fixed angle conveyor belt with collecting plates in the feed section Example: NC 1 Feeding section 600 mm Rising part 1300 mm Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable delivery height 750 - 1050 mm Fixed angle between feed and riser sections Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min Crodpfx Ashm Axgjbcsh mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, New device MASS International Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Effective width 250 mm Outer width 305 mm (without motor) Cedpfsh Nyp Uox Abcjrh Height-adjustable dispensing height 600 - 1000 mm Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, New device MASS International Deposit conveyor NCRS1 available at short notice Credpfx Aoh Nytijbcjh Adjustable angled conveyor belt, for picking up finished parts from handling or manual depositing and feeding of parts to working height or container Example: NCRS 1 Feeding section 600 mm Descending section 1800 mm Effective width 350 mm Outer width 405 mm (without motor) Pick-up height feeding section 1000 - 1500 mm Discharge height of descending section 500 - 1000 mm Adjustable angle between feed and discharge sections Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: other sizes see standard list Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, New device MASS International Deposit conveyor NPS Conveyor belt/deposit belt Crsdpoizi S Dsfx Abcoh Available at short notice Deposit area without side wall Height adjustable, movable on steerable stop rollers Example: NPS 1 Length 1500 mm Useful width 250 mm External width 250 mm (without motor) Deposit area without side wall, therefore full usable width Height adjustable Delivery height 200 - 400 mm PU belt Smooth, black Belt speed 3 m /min Movable on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Changed belt speed etc.

Condition: new, New device MASS International Z-conveyor belt NDZ3 Angle conveyor belt / conveyor belt available at short notice Description: Height-adjustable angle conveyor belt with adjustable angles Feed section 600 mm Rising section 1300 mm Discharge section 500 mm Useful width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 700 - 1000 mm Csdpoiz S Htofx Abcjrh Adjustable angles for feed section and discharge section Adjustable incline PU belt Color black L studs Stud spacing 500 mm Stud height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: new, New device MASS International Z-conveyor belt NDZ1 Z conveyor belt/angled belt available at short notice Description: Height-adjustable angled conveyor belt with adjustable angles Feeding section 600 mm ascending section 1300 mm discharge section 500 mm Useful width 250 mm Outer width 305 mm (without motor) Height-adjustable delivery height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable inclination PU belt Color black Csdok Ixlmepfx Abcorh L Cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button mobile on steerable stop rollers three-part hopper plates for feed section

Condition: new, New device MASS International Angle conveyor belt NC3 available at short notice Description: Crsdpsk Ixlusfx Abcsh Feed section 600 mm Rising section 1300 mm Usable width 450 mm Outside width 505 mm (without motor) Height adjustable discharge height 750 - 1050 mm Angle between feed section and rising section fixed 45° L - studs Stud height 30 mm Stud spacing 500 mm PU belt Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: new, New device Credpfx Aelrqiuobcsh MASS International NS3 Speciale Angle conveyor belt with Supergrip belt and separator available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Usable width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline PU belt Black Supergrip Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute Can be ordered optionally: Belt with FDA approval Other dimensions etc..

Condition: new, New device MASS International Angle conveyor belt NS3 L-conveyor belt / assembly line available at short notice, Description: Feed section 600 mm Rising section 1300 mm Usable width 450 mm Crsdpjr A D Ihjfx Abcjh Outside width 505 mm (without motor) Height adjustable Discharge height 750 - 1050 mm Angle between feed section and rising section adjustable 30 - 50° L - studs Stud height 30 mm Stud spacing 500 mm PU belt Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section