Used Jackle Power Plasma for sale (40,451)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Psdpfjz Hngmsx Airegu Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Pjdpfxez D S Ngj Airegu

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Power: 30 kW (see photo for more technical details) Pgedoz Nycgepfx Airju

Year of construction: 2011, condition: used, We offer this used Mecc Alte ECO 32-2L/4 emergency generator, manufactured in 2011. Type: ECO 32-2L/4 Nameplate ID: 0001525665 Date of manufacture: 09/2011 Number of phases: 3 Continuous operation: S1 Rated speed: 1500/1800 rpm Insulation class: H Rated power (40 °C, 50 Hz): 60 kVA Rated voltage (40 °C, 50 Hz): 115/200/230/400 V Rated current (40 °C, 50 Hz): 301/173/151/86 A Rated power (40 °C, 60 Hz): 72 kVA Rated voltage (40 °C, 60 Hz): 138/240/277/480 V Rated current (40 °C, 60 Hz): 301/173/150/86.6 A Rated power (27 °C, 50 Hz): 62.5 kVA Rated voltage (27 °C, 50 Hz): 115/200/230/400 V Rated current (27 °C, 50 Hz): 314/180/157/90.2 A Rated power (27 °C, 50 Hz) – 2nd set: 75 kVA Rated voltage (27 °C, 50 Hz) – 2nd set: 138/240/277/480 V Pgodpfoz Eiqqex Aireu Rated current (27 °C, 50 Hz) – 2nd set: 314/180/156/90.2 A Protection class: IP21 Weight: 286 kg Moment of inertia: 0.54 kg·m² Bearing designation: 6309.2RS If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 380 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 300 mm, total height: 1,750 mm, total length: 2,420 mm, total width: 2,200 mm, overall weight: 2,400 kg, table height: 750 mm, Equipment: CE marking, documentation/manual, For sale: MEBER SM300 automatic band saw. Minimum cut length in semi-automatic mode: 20 mm. Pgjdpfxsz Ikvae Aireu Minimum cut length in automatic mode: 90 mm. The machine comes with all original documentation (manuals, certificate of conformity, CE marking), as well as a sworn expert report prepared by a certified expert. Collection and transportation are the responsibility of the buyer, but I am willing to assist with loading the machine.

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable Psdpfx Ajd N E Rveirjgu - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: like new (used), Bettcher Model: 39 Power cleaver / slicer Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc Pgsdpfx Aiod Iq N Ejrou

Condition: used, mileage: 4,92,058 km, power: 368 kW (500.34 HP), first registration: 02/2018, fuel type: diesel, empty load weight: 12,850 kg, maximum load weight: 13,150 kg, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, gearing type: automatic, emission class: euro6, total width: 2,550 mm, operating hours: 12,167 h, number of cylinders: 6, displacement volume: 12,419 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, USB port, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), parking heater, power mirror, retarder, seat heater, tail-lift, Key Features Internal Reference: 26184M Chassis Number: WMA 18X ZZ1 JM7 574 93 Serial Number: 160.800.859 Vehicle Model: TGX 26.500 6x2*4 Auxiliary Drive / Swiss Vehicle Vehicle Make: MAN Product Category: Chassis Used / New / Demo: Used Mileage: 492058 Hours: 12167 Emission Standard: Euro 6 Date of First Registration: 27.02.2018 Last MOT/Technical Inspection: 17.01.2025 Fuel Type: Diesel Engine Displacement (cc): 12419 Engine Power: 500 Transmission Type: Fully Automatic Cylinders: 6 Trailing Axle: Steered Suspension: Steel-Air Retarder / Intarder: Yes Cab Vehicle Equipment: ABS, Bluetooth, CD Player, Differential Lock, Electric Windows, Electric Mirrors, ESP, Hands-free System, Tail Lift, Radio, Seat Heating, Auxiliary Heater, Cruise Control, USB Interface, Central Locking Pgedpsz Hpp Aefx Airju Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 6x2*4 Axle 1: 385 / 65 R 22.5/10mm, Disc Brakes, Leaf Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Air Suspension Axle 3: 315 / 80 R 22.5/10mm, Disc Brakes, Air Suspension Number of Axles: 3 Weights & Dimensions Gross Vehicle Weight: 26000 Gross Train Weight: 40000 Payload: 13150 Unladen Weight: 12850 Vehicle Width: 2550

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Pedpfx Aiez D Ihferjgu

Condition: new, Vehicle Charging Computer VAS 5908 Battery Charger Charging computer for vehicle starter batteries (lead-acid, gel, AGM, fleece batteries) VAS 5908 battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage Pedpov Hptzefx Airogu (suitable for 12VDC vehicle electrical systems / batteries) - 100% compatible with vehicle electrical systems, protects vehicle electronics / airbag - Can be used as a charger, external power supply, and for supplying power to the vehicle in buffer mode (support during diagnostics / programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection - Protection function in case of battery defects - Safe spark suppression - User-friendly menu navigation / charging parameters can be configured - Built-in communication interface - Sealed housing, protected against internal contamination Housing version 'B': advantageous for industrial production lines - Status display via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive accessories, e.g. external status indicator (DBL-SIG-LR remote indicator), power / charging cable, wall mounting device, etc. - Option: Customer-specific charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07 Used by leading automotive manufacturers Input voltage 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; CAUTION: For use in combination with inductive power transfer, use special firmware! Inrush current / 30A at 264VAC, temperature-independent Automatic fuse: 16A slow-blow (e.g. characteristic B) Power consumption at full load / 0.98 - No-load power consumption / 10W, disabled at the output - Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) - Transient overvoltage protection / Varistor (8kA / 151J) - Input connection / IEC/EN 60320, C14 - Weight: 8.2 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, Stepped Hose Reducer for CORMAK Dust Extraction Systems The CORMAK stepped hose reducer is a component of dust extraction installations designed to connect hoses with different diameters. It allows the extraction system to be flexibly adapted to the individual requirements of the workstation and the machines being connected. Its solid construction ensures durability, a stable connection, and proper airflow in dust extraction systems used for collecting sawdust, wood chips, and wood dust. Reduction from Ø100 to 68/46/40/35 mm Key Advantages Versatile application in wood dust extraction systems. Ability to connect hoses with different diameters, providing greater flexibility during installation. Stable and tight connection between extraction system components. Durable construction ensuring long service life. Application The reducer is designed for use in sawdust and dust extraction systems in joineries, workshops, and manufacturing facilities using woodworking machinery. Technical Data Pgodjycvhnspfx Aireu Specification Value Component type Stepped hose reducer Application Extraction systems for sawdust, wood chips and dust

Condition: used, functionality: unexamined, Ferwood Code: RU0009310 - Manufacturer Code: - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Podpfx Ajv Hrh Ioirsgu

Condition: used, functionality: unexamined, Ferwood Code: RU0002704 - Manufacturer Code: TVM 2.4-050-220/300-W1 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pgedpev Dvkbefx Airju

Condition: used, functionality: unexamined, Ferwood Code: RU0005376 - Manufacturer Code: TVM 2.2-050-220/300-W1 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pjdev Efi Aopfx Airjgu

Condition: used, functionality: unexamined, Ferwood Code: RU0007371 - Manufacturer Code: S18-00-00 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pgedpfx Ajv Ef T Ujirsu

Condition: used, functionality: unexamined, Ferwood Code: RU0007374 - Manufacturer Code: S02-00-00 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pjdpfxjv Ef U So Airegu

Condition: used, functionality: unexamined, Ferwood Code: RU0007375 - Manufacturer Code: S02-00-0Q - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pgjdpfx Aiev Egaiorsu

Condition: used, functionality: unexamined, Ferwood Code: RU0007377 - Manufacturer Code: S06-00-1J - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pgodpov Egavefx Airou

Condition: used, functionality: unexamined, Ferwood Code: RU0007378 - Manufacturer Code: S06-00-1E - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Podpfsv Ega Nex Airogu

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,257 h, load capacity: 5,600 kg, construction height: 2,965 mm, power: 156 kW (212.10 HP), empty load weight: 7,900 kg, total length: 4,453 mm, construction width: 2,505 mm, Tractor Speed class: 50 Technical condition: very good Battery condition: very good Podpfx Aezc Dbisirogu

Condition: good (used), 3-jaw power chuck Stock number: Pgodswy Hl Topfx Airju Manufacturer: unknown Diameter: 250 mm Mounting: Threaded Attachment: 3 bolts, bolt circle 225 mm Distance 195 mm Spigot: 200 mm Bore: 55 mm Height: 130 / 185 mm Accessories: Interchangeable jaws Weight: 36 kg

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Pgodpfjxcbmhox Airou Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Pgodpfx Ajxciumoirou Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: new, cutting range for steel to 12.0 TS mm cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17.9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting Podpfx Aiow U U Tgerjgu cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut-off cut for carbon steel . 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The Avalon 65 AIR air plasma cutting system with integrated compressor compressor is your reliable partner for demanding applications. use. With the Avalon 65 Air, you can make cuts up to a material thickness of material thickness of 35.0 mm. Features : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc characteristics - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch for activating the air flow to set the test air pressure . without having to trigger the torch - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure missing wear parts , . overloading of the pilot arc. * max. cutting thickness carbon steel = 35.0 mm (separating cut) * Optimal cutting thickness carbon steel = 25.0 mm (quality cut) * Stainless steel = 25.0 mm Psdpoxaaicsfx Airsgu * Aluminum = 20.0 mm * Copper = 14.0 mm Special equipment included : - 1x 3.0 m / ground cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover