Used Omga for sale (34)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Kjdpfjxnlgcsx Aansfa Storage location: Garbsen

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg Ksdpfx Aaemv E Hxonefa – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: LPUN0013, Equipment: double-sided, OMGA UNIBLOCK 4 N RT 300 – Upper & Lower Wide Belt Sander Manufacturer: OMGA Model: UNIBLOCK 4 N RT 300 Serial Number: LPUN0013 Year: 1996 Condition: Used Location: SLOVENIA Description The OMGA UNIBLOCK 4 N RT 300 is a robust industrial upper and lower wide belt sanding machine, designed for precise calibration and fine sanding of solid wood and panel materials. With four sanding aggregates and automatic height adjustment, the machine is suitable for demanding production environments. Technical specifications • Working width: 300 mm • Working height: 5 – 150 mm • Automatic working height adjustment with digital display • Sanding aggregates: o 1st aggregate: Upper grooved steel calibration roller o 2nd aggregate: Upper sanding pad o 3rd aggregate: Lower grooved steel calibration roller o 4th aggregate: Lower sanding pad • Belt conveyor with variable feed speed • Blowers included • Dimensions (L × W × H): approx. 3200 × 1350 × 2400 mm • Weight: approx. 2600 kg Kjdpfx Aex Iqfgsansfa Application Ideal for: • Solid wood calibration • Panel sanding • Joinery and furniture production • Industrial woodworking lines OMGA wide belt sander, upper and lower sander, UNIBLOCK 4, RT 300, sanding machine wood, industrial belt sander, calibration sander, panel sander, woodworking machinery, used wide belt sander, OMGA sanding machine

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Kedpexztydofx Aansfa Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: used, Year of construction: 1989, - Year: 1989 Ksdoxaniwepfx Aanefa - Documentation available: No - CE certificate present: No - Serial number: 106 - Max. cutting height [mm]: 80 - Max. saw blade diameter [mm]: 350 - Max. spindle speed [rpm]: 3700 - Voltage [V]: 380 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Kjdpfxsxvh E Re Aanofa Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: reconditioned (used), Year of construction: 2001, DOUBLE lignum angle beveller Kjdpfx Ajlhr Ezeanofa OMG TR 2 DOUBLE lignum angle beveller Double angle beveller lignum Invincibile ok super 350 mm Used 2001 To do: Double sided lignum beveller Model: Invincible around super 350mm Description: DOUBLE miter saw, double miter saw, 2 x 350 mm miter saw blades, sliding, rated power 21 amps, 50 Hz, 3-phase rotation on the blades 3000 l/min. Year of manufacture 2001. Very good condition Year: 2001

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Saw blade diameter: 220 mm Kfjdpfx Aasxwumqonja Spindle speed: 5000 rpm

Condition: used, Dane techniczne: Maksymalna średnica piły: 350 mm Kfjdpfx Aaok Ac Siensa Maksymalna wysokość cięcia: 110 mm Maksymalna szerokość cięcia: 150 mm Maksymalna długość elementu: 2800 mm Możliwość ustawienia piły pod kątem w zakresie do 45° Docisk pneumatyczny Podnoszenie tłoka W tygodniu: 6 o godz. Wyłącznik bezpieczeństwa Zasilanie: 400 V Moc układu: 2x2,2 kW

Condition: like new (used), Motor power: 3.7 kW (5 HP) Table dimensions: 1200 × 800 mm Cutting angle adjustment: 3 positions Kedpfx Aexup Hmeanjfa Speed: 3000 RPM Voltage: 380 V

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Cutting width max. 1500mm Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° 2 Motors x 4,0kW (5,5 HP) Kedpfx Ajxtxh Deanefa Good condition. Available immediately.

Condition: used, Year of construction: 2017, Number of motors 2x 1.2 kW Stück 0 2800 mm Control ja 0 OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- Sold on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Technical manufacturer's description: Double miter saw for cutting two glazing beads simultaneously. The right saw unit is fixed; the left unit is adjusted via the positioning control. Features of the positioning control: - Monochromatic graphic display 240 x 64 pixels - Display of 30 characters on 8 lines - Keypad with 28 function keys - FN key for interrupting the function - Diagnostics and error messages - Language selection: Italian, German, British, Spanish, French, and Swiss - 10,000 memory lines divisible into 999 cycles, max. 99 lines per cycle - RS-232 interface - Dimensions can be entered manually or via USB interface - 3 correction values ??each for the left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on steel-hardened axes. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is complete, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. Machine features: - Fixed right-hand saw unit - Pivoting clamping device - Positioning control for TRF 527 NC CE - Maintenance unit Kfedpfx Aoxmamneansa - Center support - 220 mm Ø carbide-tipped saw blades - Two-hand control - Intermediate support for simultaneous sawing of two glazing beads - Pneumatic saw unit lift - Motor protection switch - Pressure switch - Undervoltage release - Overload switch - Tool set - 2 x 4-position angle star saw holders Technical specifications: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight 217 kg ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus VAT.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Kodpfx Aaet Uk Rmonofa

Condition: used, functionality: limited functionality, cutting height (max.): 90 mm, cutting width (max.): 140 mm, cutting length (max.): 2,820 mm, total width: 950 mm, total length: 3,600 mm, total height: 1,250 mm, saw blade diameter: 300 mm, type of input current: three-phase, rotational speed (min.): 3,000 rpm, OMGA TR2-A Double Mitre Saw for Wood and Aluminium Specifications: • Condition - used, requires adjustments and minor repairs Kodpfx Aaexl Ecxjnofa • Manufacturer - OMGA • Model - TR2-A • Main motors - 2 x 2.2 kW (3,000 rpm) • Pneumatic head control • Max cutting length - 282 cm • Min cutting length - 15 cm • Max cutting cross-section - 90x140 mm (at right angles) • Max blade diameter - 300 mm • Extraction nozzles diameter 80 mm • Angle cutting range from -45 to +45 degrees (right, left) • Vertical clamps for material hold-down • Weight - approx. 600 kg • Overall dimensions - 360 x 95 x 125 cm (L x W x H) Additional information: • Machine operational but requires minor fixes and adjustments • Provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: excellent (used), Year of construction: 1994, TECHNICAL DATA - Max. disc diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 units - Pneumatic cutting (saw blade movement up/down) - Saw units adjustable to a 45° angle - Manual adjustment of the saw unit spacing Kfjdpfjxrl Riex Aanea - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2,820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamping devices: 2 units - Foot switch control - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3,620×1,100×1,250 mm - Weight: approx. 500 kg – Unpainted – Swiveling saw units – Used saw, in very good condition

Condition: used, OMGA T421 IDC000097 Kfedpfxsu Dhupj Aansa - saw blade diameter: 400 mm - complete with saw dust filter

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° Kodeg Tumcepfx Aanefa 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: excellent (used), OMGA SP500 F Crosscut Saw Cutting width: 500 mm Cutting height: 150 mm Pneumatic saw feed Pneumatic material clamping Maximum saw blade size min/max: 490-500 mm Saw blade bore diameter: 30 mm Right table length: 200 cm Left table length: 200 cm Saw motor power: 5.5 kW Ksdjw Dy Shjpfx Aanjfa CE certificate

Condition: ready for operation (used), Year of construction: 2000, saw blade diameter: 300 mm, cutting height (max.): 80 mm, cutting length (max.): 700 mm, type of input current: three-phase, total length: 132 mm, total height: 160 mm, total width: 104 mm, overall weight: 130 kg, mount diameter: 30 mm, height adjustment type: mechanical, OMGA RN700 Radial Saw Specifications: - condition - used - manufacturer - OMGA - model - RN700 - disc diameter max 300 mm - disc diameter min 295 mm - spindle 30 mm - saw motor - 2,94 kW - maximum dimensions of the cut piece 80 x 700 mm - guards on the saw for the safety of the saw operator Kedpeuf R Husfx Aanefa - retracting cable for the body of the saw - adjustment of cutting in three planes - suction nozzle fi 80 mm - 2000 year of production - the machine meets CE standards - weight - 130 kg - overall dimensions - 132 x 104 x 160 cm ( W x L x H ) Additional information: - the machine is in excellent technical condition, ready for immediate use - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and transportation costs

Condition: good (used), Year of construction: 2005, OMGA opti cut IDC000080 - Manufacturer: OMGA - Year of production: 2005 - including table before and after - Control cabinet Kfjdpst D Duksfx Aanea - Working condition

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Year 2012 Kfodpfxjt Ndz Uo Aanea All complete. Very good condition. Available immediately.

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 120 mm, cutting width (max.): 300 mm, rotational speed (max.): 3,000 rpm, saw blade bore: 35 mm, product length (min.): 600 mm, TECHNICAL DETAILS Maximum workpiece thickness: 120 mm Maximum workpiece width: 300 mm Minimum workpiece length: 600 mm Example cutting sizes: 90 x 220 mm / 50 x 270 mm Feed & cutting cycle Maximum feed speed: 180 m/min Maximum acceleration: 15 m/s² Saw cycle time: 0.2 - 1 s Average number of cuts: 80 - 90 / min Feed motor power: 7.5 kW Saw blade & motor Kjdpfxsvzyule Aanofa Saw blade diameter: 450 mm Saw blade bore: 35 mm Speed: 3,000 rpm Saw motor power: 5.5 kW Motor power: 5.5 kW Extraction Extraction connection: 200 mm

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 80 mm, cutting length (max.): 2,500 mm, total length: 7,470 mm, total width: 1,100 mm, overall weight: 450 kg, total height: 1,500 mm, type of input current: three-phase, main saw diameter: 340 mm, OMGA T720 crosscut saw Specification: Ksdpfx Aor Ik I Ajanefa - condition - used - manufacturer - OMGA - model - T720 - working width - 250 mm - working height - 80 mm - motor power - 2.2 kW - right table length - 400 cm ( 2 x 200 cm ) - left table length - 315 cm - tables with a width of 29 cm - pneumatic ratchets for cutting to the set length - 3 pcs. - adjustable cutting speed - max blade diameter - 340 mm - spindle - fi 40 mm - suction nozzle - fi 100 mm - weight - about 450 kg - overall dimensions - 742 x 110 x 150 cm (L x W x H) - body dimensions - 100 x 110 x 150 cm (L x W x H) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Input table automatic feeding 5,10m (pusher system) Kfsdpfxjvxu Rpj Aanoa Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: excellent (used), Year of construction: 1999, Good morning, We offer for sale an automatic radial arm saw from the excellent Italian company OMGA model RN700 Kodpfxjn Nyfyj Aanjfa To begin with, some useful information about the machine: * blade diameter in the range of 295 - 300 mm. * spindle 30 mm * saw motor 4.0 HP ( 2.9 kW ). * max dimensions of the cut element 80 x 700 mm * pneumatic pressures of the cut element - 2 pcs. * CNC controller for programming the parameters of the saw, including feed speed, width of cut * movement of the saw head on the stepper motor * own sawdust extraction * adjustment of cutting in three planes * very good technical and visual condition * safety guards and mushrooms for the safety of the saw operator. * 1999 year of production * overall dimensions 150 x 95 x 140 cm ( length x width x height ). * meets CE standards