Used Jpt 310 for sale (2,308)

Condition: new, power: 227 kW (308.63 HP), fuel type: diesel, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 7,280 mm, loading space width: 2,450 mm, loading space height: 2,560 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), Equipment: - Extended Day Cab - Reinforced mechanical cab suspension - Halogen headlights with double reflector and impact-resistant Lexan lens - Headlamp beam for right-hand traffic - Daytime running lights - Adjustable roof spoiler - Long side fenders - Cab color: E1980WHTE - Headlamp surround and bumper color: Stone Grey - Underbody and side step, cab and mudguards in Stone Grey - Roof spoiler color: Crystal White Itedpfoyqdkmsx Ahhsk - Side fender color: Crystal White - Chassis color: grey - Left-hand drive - Air-suspended luxury driver’s seat with adjustable damping and pneumatic lumbar support - Driver’s seat with armrest - Fixed passenger seat - Engine tunnel storage compartment - Manually controlled air conditioning with recirculation function - Roof hatch with manual operation - ECAS remote control - Universal FMS connector (Fleet Management System) with wiring for reading truck manufacturer’s FMS standard data - 10-year PACCAR Connect subscription - Pre-installed wiring for satellite communication system for German toll (toll collection system) - Digital (intelligent) VDO tachograph - Speed limiter configuration for cruise control/throttle: 90 km/h - DAF Infotainment System - Combined antenna for AM/FM, GSM, and GPS. GSM frequency ranges: 900 MHz, 1800 MHz, and GPRS - Adaptive Cruise Control (ACC) with Forward Collision Warning (FCW) and AEBS-3 (AEBS: Advanced Emergency Braking System) - Driver Performance Assistant (DPA) - Speed limit recognition - DAF Drowsiness Detection - Lane departure warning system - Electronic Vehicle Stability Control (VSC) - Acoustic reversing warning system - Basic immobilizer - Hill start assistant - Safety system to alert the driver to moving objects on the passenger side - Front axle type 152N, with 100 mm offset. Parabolic suspension - Mechanical differential lock - Front axle(s): Tire size 295/80R22.5, rim size 22.5 x 8.25 - Driven rear axle(s): Tire size 295/80R22.5, rim size 22.5 x 8.25 - Supplier: Goodyear - Tire pressure monitoring - Steel disc wheels, silver grey - Wheel trim rings without center section, silver grey (RAL 9006) - Front axle: Tire size 295/80R22.5, Goodyear KMAXS2 - Driven rear axle: Tire size 295/80R22.5, Goodyear KMAXD2 - Spare wheel not applicable - Engine PX-7, 6-cylinder diesel engine, 6.7 liters. Output 227 kW (308 HP) at 2300 rpm. Max. torque 1190 Nm at 1200–1500 rpm - Emissions standard Euro 6 - Idle shut-off after 5 minutes - PowerLine automatic transmission, 8 speeds - PowerLine 8AP1200 automated transmission, ratio 4.89–0.64, 8 speeds - Software for automated gearboxes, optimized for normal transport applications. Gearbox control version: Full. - Rear axle ratio 5.14 - ASR system - Parking brake operation with test position - Wheelbase 5.85 m / rear overhang 2.68 m - Longitudinal member height 270 mm, thickness 8.0 mm. No internal reinforcement. - Aluminum fuel tank, 340 liters - AdBlue® tank 30 l, positioned on the right side of the chassis - Wheel chock - Suitable for towing drawbar, type plate up to max. permissible GCW - Drawbar crossmember, D value 85 kN, Dc value 70 kN, V value 25 kN. Trailer coupling D value 85 kN. Crossmember and coupling - Pneumatic coupling for trailer with rotary couplings - Electrical connection for trailer (24 V) with two 7-pin sockets. An additional 7-pin socket for connecting the trailer/semi-trailer EBS system - LED side marking lights (text cut off)

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools Itodpjzguk Ujfx Ahhok 20-position tool changer Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection.

Condition: used, functionality: unexamined, Planer with planing shaft at the bottom and top Isdpfxoy Ryx Us Ahhetk Double-sided planer for producing slats Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Jointing device at the bottom and top Year 1990

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Itodpfsygiafox Ahhok Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: new, mileage: 1 km, power: 228 kW (309.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, loading space length: 7,800 mm, loading space width: 2,550 mm, loading space height: 2,500 mm, Year of construction: 2026, Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Transmission Transmission: ZF Powerline, 8 gears, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Parabolic spring suspension Rear axle: Max. axle load: 13,000 kg; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Air suspension Functional Iedpfx Ajzi Dlyehhotk Body brand: Veekemans Sliding Curtain Condition Overall condition: very good Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: None

Condition: used, mileage: 3,29,000 km, power: 228 kW (309.99 HP), first registration: 10/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 7,050 mm, loading space width: 2,550 mm, loading space height: 600 mm, Year of construction: 2012, Equipment: ABS, crane, Iveco Stralis 310 PLATFORM 7,05 m + CRANE + REMOTE CONTROL Imported / Accident-FREE Itjdpen Urnxsfx Ahhek IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? MILAGE: 329 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH TIPPER: 705 x 255 x 60 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 510/140 cm TIRE SIZE: 13R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: FASSI F170A.22 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, mileage: 6,46,000 km, power: 228 kW (309.99 HP), first registration: 04/2011, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 8,400 mm, loading space width: 2,470 mm, loading space height: 700 mm, Year of construction: 2011, Equipment: ABS, air conditioning, crane, Renault Premium 310 DXI / 4x2 Platform 8,40 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2010 ? MILAGE: 646 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH Platform: 840 x 247 x 70 cm (L x W x H) CAPACITY: 7 000 kg TOTAL WEIGHT: 19 000 kg WHEELBASE: 645 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR Ijdpfx Ahetpfppehetk CRANE: FASSI F130AC.23 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, Year of construction: 2007, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, Weight: 4.000 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: No - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 Ijdpfx Ajyzp Akjhhstk - Current consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 22,000 kg, overall weight: 29,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,170 mm, total length: 11,700 mm, total width: 2,550 mm, total height: 2,650 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, drawbar plate with interchangeable 2 kingpin, with 2 kingpin positions Outer frame slightly angled with load-lock profile for lashing straps 2 pairs of lashing eyes embedded in the outer frame on the gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the well, 5 tons each 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 outrigger wedges with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell fenders in front of and behind the axle assembly 2 storage boxes made of stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 2 pairs of pole pockets embedded in the outer frame on the gooseneck, internal dimension 70 x 40 mm 6 pairs of pole pockets embedded in the outer frame in the well, 70 x 40 mm Internal dimensions!! Internal width between the poles 2420 mm!! 3 lashing/pole strips in the well, transverse embedded in the floor over the entire width up to the outer frame, approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a cover, half open downwards. For lashing and inserting poles 80 x 80 mm. Pieces of insertable poles W=80/ D=50/ L=1200 mm, hot-dip galvanized Pieces of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, with support beam, at the center of gravity at approx. 500 mm, loadable with 2000 kg over the entire width, at 1000 mm with 1000 kg over the entire width and at 1500 mm with 500 kg over the entire width, including underrun protection with lighting, extendable. 2 pairs of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Storage compartment for insertable poles, open, on the front panel or below the loading area (for 10 insertable poles 80 x 50 x 1200 mm and 4 insertable poles 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering knuckle, with automatic reversing lock via reversing light and additional locking function on the vehicle via a button. Air suspension with raise/lower valve Wheels & Tires 235 / 75 R 17.5 according to manufacturer's choice Iodpfsi Ri Hvjx Ahhjtk Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition via EBS-Canbus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no factory installation. Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via the reversing light 1 LED rotating beacon with holder, swit

Condition: used, mileage: 2,73,000 km, power: 272 kW (369.82 HP), first registration: 10/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Scania Model P370 6x2-4 Hvidtved Larsen FlexLine 310 Year 2015 Condition Very good Serial Number YS2P6X20005395210 Ref. nr. 178151 Reg. date: 30-10-2015 Last seen: 13.11.2025 Engine: DC13 116/370 hp Hk: 370 Km: 273000 Gearbox: Opticruise GRS895 Eurotype: 6 Diesel tank: 1 Tank liter: 300 L Rear view camera: ? Air conditioning: ? Cabin type: CP16L Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 50% Front suspension: Air Suspension rear: Air Wheelbase: 4500 mm Toolbox: ? Total weight: 26000 Kg Net weight: 17025 Kg Load capacity 8975 kg Manufacturer: Hvidtved Larsen FlexLine 310 Tank capacity: 10000 liter with stamp High pressure pump: Uraca KD 718G Itedpfxjzhfcqo Ahhjk High pressure capacity: 333 L/min at 170 bar High pressure pump hours: 1474 Vacuum pump: CVS Vacustar W1300 Vacuum capacity: 21.667 l/min with variable hydraulics. Vacuum pump timer: 3250 Remote control: ? Water heater: ?

Year of construction: 2011, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 4170 mm (470 + 3150 + 550mm) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Itsdpfxsl Dxahj Ahhok Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size less than 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Pay attention to: sand, stones, and minerals - Compressed using press tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options at an extra cost: Plant construction / mütek system technology: - mütek Shredder MRZ shredding technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Transport screws - Silos - Control system interfaces of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Operating principle: The machine has a silo with a stirrer. In each of the 4 corners of the storage silo, there is a vertical screw that compacts the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either when the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for automatic feeding of the heating boiler Format Ø 30 mm Throughput up to a maximum of 310 kg/h Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces via screw feed. Fully automatic 24-hour operation possible. High energy efficiency. Briquettes/pellets with consistently high quality and density. For automatic feeding into industrial furnaces Itsdpjfbb Arsfx Ahhsk Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format is an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be processed without any problems (various biomass and agar-based materials).

Condition: used, Używana klaryfikująca prasa filtracyjna produkcji Seitz Orion typ OF 100/150 w wykonaniu ze stali kwasoodpornej. Prasa posiada 154 płyty filtracyjne wykonane ze stali kwasoodpornej o wymiarach 1000 mm x 1000 mm, oraz dwie płyty końcowe. Powierzchnia filtracji ok 310 m2. Zamknięcie hydrauliczne. Prasa zamontowana na ramie ze stali KO. W zestawie z maszyną przyłącza podawania, manometry i lokalny panel sterowania. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm Iedpfeyi Eygox Ahhjtk # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) Iedpjywpcpefx Ahhjtk • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm Itodpfxszap H Ss Ahhek MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: used, machine/vehicle number: 22.8661/11, Böwe 310 Continuous forms cutter and separator Designed for transactional, mailing and data processing applications High-speed cutting of fanfold continuous forms Pin-feed paper processing Itsdpfx Ahjzardyjhjk Adjustable cut length Industrial production design Technical Data Form width (input): up to 510 mm Form width (output): up to 470 mm Form length: 2"–17" Adjustable format length Processing speed: up to 30,000–38,000 cuts/hour Voltage: 220 V Frequency: 50 Hz Power consumption: 1320 W Features Center slitter Margin trimming capability Adjustable cutting position Programmable format settings Integrated stacking delivery Designed for high-volume continuous forms processing Machine Information Model: Böwe 310 W.-Nr.: 22.8661/11 Manufacturer: Böwe Informations- und Systemtechnik GmbH Made in Germany Technical details may vary

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t Ijdpfx Ahotv Iibehetk dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Iedpfx Ahjru Un Hjhetk Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Itodpfx Ajyu Nb Ejhhok Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. • The order confirmation from ENGEL to NYPRO can be found in the documents. Iedpfx Ahswb Dl Tshotk The original new price was approximately €330,000. The selling price is €78,500 including crane. I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 stitch- fold- trimming unit 304 QSM 2 stitching head Hohner Universal 48/5 front cut stream delivery TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Itedpfxjxnb Ago Ahhek Delivery time: immediately from stock

Condition: used, Year of construction: 2015, Year of manufacture: Jan 2015 Itedox T Acnspfx Ahhsk Serial number: 310/80R22.5 Very niceheavy duty terminal tractor tires 4 x 28 mm profile 1 x 20 mm profile

Condition: used, mileage: 18,000 km, first registration: 12/1993, fuel type: gasoline, axle configuration: 4x2, color: red, gearing type: mechanical, total length: 5,230 mm, total width: 1,970 mm, total height: 2,260 mm, Year of construction: 1993, Empty weight: 2.260 kg Isdpfx Aoy Uwxyohhetk MERCEDES 310 1993 EX DUITSE BRANDWEER , DUITS KENTEKEN. PERFECTE TOESTAND WERKELIJK ALS NIEUW.

Condition: used, mileage: 1,08,405 km, power: 70 kW (95.17 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 2,316 kg, maximum load weight: 1,184 kg, overall weight: 3,500 kg, tire size: 235/65R16C, axle configuration: 4x2, wheelbase: 3,665 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 6, loading space length: 2,400 mm, loading space width: 1,800 mm, loading space height: 450 mm, Equipment: ABS, additional headlights, air conditioning, cabin, electronic stability program (ESP), low noise, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, Doka, 1x comfort seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, auxiliary heating, switch 6, ABS (anti-lock braking system), rotating beacon, storage box, leaf suspension, trailer coupling ball head, noise protection G1, U-protection, green environmental badge Wheelbase: 3665 mm Body: Rear tipper body approx. 2m³ ESP, rear axle stabilizer bar, reinforced front axle stabilizer bar, reinforced shock absorbers, lockable glove compartment, auxiliary hot water heater, exterior temperature display, adaptive brake light, driver airbag, smoker package. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Itedpfxovhnkzo Ahhok - .

Condition: new, power: 227 kW (308.63 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,483 mm, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Equipment: * Mechanically reinforced cab suspension * Extended Day Cab * Central locking system, 3 keys, 2 remote controls * Exterior sun visor, green, light-permeable * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green-tinted windows * Side and rear windows opaque * 5 mirrors * Electrically adjustable mirrors * Front mirror * Mirror brackets suitable for superstructures 2.50 - 2.60 m * Headlight beam pattern for right-hand traffic * H3279/1 Brilliant White * Chassis color: anthracite grey * Headlight surround and bumper: Stone Grey * Underbody cladding, cab steps and fenders: Stone Grey * Pneumatic steering column lock * Roof hatch with manual operation * Driver's seat: air-suspended luxury seat * Passenger seat: air-suspended * Driver's seat armrest * Passenger seat armrest * ECAS remote control * Converter 24 V to 12 V, 15 A, 180 W * Left-hand drive * Soft-grip steering wheel, color black * Black seat belts * Engine tunnel storage compartment * Air conditioning * Electric windows * Digital tachograph, VDO version G2V2A * Speed limiter setting: 90 km/h * FMS interface, prepared * Adaptive Cruise Control with FCW and AEBS-3 * Toll system preparation * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FM/DAB/DAB+ radio with loudspeakers including phone integration * Driver Performance Assistant * Reversing warning with self-adjusting volume * Manual main switch * Electronic stability control (VSC) * Lane departure warning system * Basic immobilizer * Hill start assist * DAF Side and Turn Assist * Alcohol interlock, prepared * Speed limit recognition * DAF drowsiness and distraction detection * Compliant with UN regulations R155 and R156 * Rear: 13.00 t, air suspension, SR1344 * Front axle 1, 7,500 kg, load index 154 Iedpfoy Dmvyox Ahhstk * Rear axle 1, 12,600 kg, load index 148 * Front: 7.50 t, parabolic, 152N * Continental * F1, 315/70R22.5 CGW CEPS5 158/150 L Steering ABA 3P * R1, 315/70R22.5 CGW CEPD5 154/150 L Traction ACA 3P * Decorative wheel rings, silver-grey * Tire pressure monitoring system * Front axle(s): 315/70 R22.5 * Driven rear axle(s): 315/70 R22.5 * Steel disc wheels, silver-grey * RR, not applicable * Rear axle ratio 5.14 * Mechanical differential lock * 8-speed PowerLine 8AP1200 overdrive transmission, 4.89-0.64 * Engine PX-7, 227 kW/308 hp. Cab badge: 310 * Emission standard Euro 6 * Traction control system (ASR) * Standard transport, full version * Idle shutdown automatic, 5 minutes * PowerLine automatic transmission, 8-speed * Parking brake actuation with test position * Exhaust brake * Wheelbase 5.30 m / rear overhang 2.40 m * One wheel chock * Longitudinal frame member 270/8.0 mm, without internal reinforcement * Aluminum fuel tank, 340 l * Front underrun protection * Standard component arrangement * Splash guards * AdBlue® tank 30 l, right side of chassis * AdBlue® tank filler cap without lock * Temporary rear light brackets * Rear lights with bulbs * Battery box on left, no spare wheel bracket * EAS unit right, discharge right, facing rear * Use with drawbar, type plate, up to max. gross vehicle weight * Pneumatic trailer connection, rotary coupling * Cross member D85-Dc70-V25, coupling D85 A, mounted * Electrical connection for trailer + EBS, 24V/2x7-pin * Body mounting according to BAM 1, loose brackets * Body connector on chassis * Side marker lights * Tail lift application * Alternator 100 A, batteries 2 x 175 Ah * Technically permissible GVW chassis max 18,000 kg * L