Used Jpt 310 for sale (4,225)

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel Itsdpfxow A Af Ie Aaben - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, Siemens 840 D CNC Working area Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 51 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Main spindle Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle bore 51 mm Main spindle Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Iodpjw Adhwofx Aabetn Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor • Provision for fume extractor • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Condition: used, machine/vehicle number: 008105, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Iodpfx Aaow Idgpsbjtn

Year of construction: 2015, condition: ready for operation (used), Control Unit Brand FAGOR Isdew Sy Rrjpfx Aabstn Model 8055i Main Drive Spindle bore 155mm Workpiece Workpiece drm over bed 620mm This Pinacho ST 310 x1500 was manufactured in 2015. A robust horizontal turning machine featuring a swing over bed of 620mm, and a main spindle bore of 155mm, ideal for handling substantial workpieces. Bed width stands at 350mm, ensuring stability during operations. Consider the opportunity to buy this Pinacho ST 310 x1500 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1983, Top Roll Ø:310mm Length: 3100mm Width: 10mm Height: 1630mm Weight: 11600kg Itedpfxsxdb Rpo Aabjn Hydraulic driven 3 roll plate bender Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, Granifrigor KK 310 Tropic Grain Cooling Unit Compact, mobile cooling unit, completely mounted in a plastic-coated frame, for the cold preservation of grain, oilseeds, and other bulk goods. It features an automatic Hygrotherm reheating system and Hygromat for regulating cold air humidity. The Granifrigor Tropic series grain cooling units are optimally designed in terms of performance and energy consumption for the temperature and humidity of tropical climates. Area of ​​Application Reliable grain cooling in tropical climates (heat, high humidity, monsoons, and fog) – reliable humidity control thanks to the HYGROMAT™ automatic system Excellent suitability and reliable operation even at very high outside temperatures thanks to safety refrigerants Handling and Operation Particularly powerful compressors and large heat exchangers for tropical conditions Quiet normal operation thanks to frequency-controlled fans and a sound-optimized compressor Effective, large-area filters with integrated filter monitoring Increased safety thanks to backpressure indicator Optimal control thanks to the viewing window in the air cooler Reliable start-up even at cool outside temperatures thanks to speed-controlled condenser fans Easy and thorough cleaning thanks to good accessibility, e.g. E.g., through heat exchangers with large fin spacing, housing doors, manholes, and inspection openings in the air duct. Energy and environmental balance Economical solution thanks to low power consumption Energy-efficient design thanks to frequency controls and state-of-the-art motors Environmentally friendly safety refrigerant – CFC-free and HCFC-free Further energy savings thanks to winter and summer thermostats Permanent maintenance and monitoring of the desired cooling air humidity and temperature with HYGROTHERM Technical specifications Operating limits Standard version with refrigerant R 407C - Maximum ambient temperature: +43°C - Lowest achievable cold air temperature: +8°C at 95% relative humidity Cooling capacity Initial grain temperature +30°C, cooling to +10-12°C, grain moisture content approx. 16% - Cooling capacity in 2 hours: 310-520t/ 24h Itjdpfxexlrl He Aabon Compressor cooling capacity (average temperature) - 160 kW at +10°C evaporation temperature and +40°C condensation temperature Air flow rate standard version 18,000 m³/h (100 mm WS) 1000 Pa 15,400 m³/h (200 mm WS) 2000 Pa 14,000 m³/h (300 mm WS) 3000 Pa 10,000 m³/h (400 mm WS) 4000 Pa Air flow HP version for high silo backpressure 18,000 m³/h (100 mm WS) 1000 Pa 14,000 m³/h (300 mm WS) 3000 Pa 8,000 m³/h (500 mm WS) 5000 Pa 3,000 m³/h (800 mm water column) 8000 Pa Electrical connection - Electrical power consumption (average): 53 kW - Maximum current consumption without electric heater: 120 A - Electrical connection: 160 A - Current type: 400 V, 3-phase, 50 Hz Dimensions Length: 3370 mm Width: 1810 mm Height: 2410 mm Weight: 1900 kg Filter - 3/4" hose line - Max. flow rate approx. 65 l/h Cold air connection - Diameter: 600 mm Year of manufacture: 2016 New price: €90,500 This unit comes from the Rolls-Royce Solutions Magdeburg Technology Center and is in very good condition. You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch Iodpfxjumpq No Aabetn - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 310 mm, planing width: 310 mm, Top model from Weinig: Weinig Powermat 3000 Special 6-spindle four-sided planer All motors frequency-controlled, 4000–12000 RPM Extra wide working width of 310 mm Working height 160 mm - Optional we can make it 200 mm All spindles with Powerlock High-speed feeding system of 100 m/min With profile and straight jointers Axial and radial CNC-controlled axes Short infeed table, 1.1 meters Iodsxc Eb Aspfx Aabotn WMC Moulder Master Full options machine ! Like new, never used in production!

Condition: good (used), Technical data for the shelf connector: Shelving system: SLP The scope of delivery includes: 01x shelf connector, used for shelf spacing: 310 mm Total length: 310 mm Cross section: L 25 x 25 mm Material thickness: approx. 3.00 mm Material color: orange Drill hole diameter: 13 mm Isdpfx Aaovuxy Tobotn Weight: 0.460 kg | piece 04x screws M10 x 35 mm 04x nuts M10 Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2025, Functions: 1. Direction of rotation switch: This switch allows the operator to control the direction of rotation of the rotator disc, which is important during precision welding work. 2. Direction of rotation switch: Thanks to this tool, the operator can easily change the direction of rotation of the disc, which allows the device to be flexibly adapted to various tasks. 3. Smooth regulation of the disc rotation speed: Adjusting the disc rotation speed allows you to adapt the device to various materials and welding processes, which increases the precision and quality of work. 4. Compact, compact design: The compact design of the device saves space in the workshop and makes it easy to move the device to different work stations. 5. Control pedal: The control pedal allows the operator to precisely control the operation of the rotator, which is important when welding and assembling elements. 6. Thermal fuse: The presence of a thermal fuse protects the device from overheating, which increases operational safety and durability of the machine. 7. Brush motor: The brush motor ensures stable and effective operation of the device, which is important in welding applications. 8. Disc inclination range 0 - 90°: The ability to tilt the disc in the range from 0 to 90 degrees allows you to work in the optimal position, which translates into the quality of welds and the operator's comfort. 9. Possibility of installing a centering holder: This enables accurate and stable mounting of elements, which is important for precise assembly and welding work. Advantages: 1. Higher work efficiency: Thanks to the ability to rotate cylindrical elements, assembly and welding work becomes more effective. 2. Reducing production costs: Increasing the precision and quality of work can help reduce reject costs and improve production efficiency. 3. Repeatability of the joints made: The device ensures constant quality of welds and joints, which is important in industries that require repeatability. 4. Flexibility in use: The ability to adjust the speed, direction of rotation and inclination of the disc makes the tool flexible and adaptable to various tasks. 5. Improves the welder's working conditions: It facilitates the welder's work, enabling welding in the optimal position, which affects the comfort and safety of work. Set contains: 1. PS-310 positioner device. 2. Control pedal. 3. Power cable. 4. User manual. 5. Mast with welding fixture. This kit contains the necessary elements to start working with the device and allows you to use its full capabilities in terms of assembly and welding. Technical parameters: Maximum load 30kg Worktable size φ310mm Tilt angle 0° ~ + 90° Rotation speed 1-15 rpm Rotational power 120W Manual tilt speed Voltage 220V-1PH-50HZ Iodpfxsrigk Ns Aabetn Weapon support Dimensions 500x500x440 mm Weight 34 kg *three-jaw chuck is not included in the set

Condition: used, mileage: 23,100 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,140 kg, first registration: 02/2021, emission class: euro6, color: white, number of seats: 7, total length: 5,767 mm, total width: 2,198 mm, total height: 2,338 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, * Tail lift * Power steering * Partition wall * Central locking Speed control: Cruise control Air conditioning: Air conditioning Safety: ABS * ESP Itjdpoxi Ipvefx Aaben Equipment: - Fog lights - Radio - Electric exterior mirrors - Electric windows - Tachograph - Artificial leather - Bluetooth hands-free system - Trade-in possible - Financing & leasing via our partner banks - Warranty up to 48 months possible (vehicle age dependent) - Subject to error, changes & prior sale

Condition: used, machine/vehicle number: 008107, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 310/9/A20/S2 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 310/9/A20/S2 Itjdpfx Aajw U Rqzsbsn

Condition: used, Year of construction: 2023, control Siemens Sinumerik 828D Distance between centers 3.000 mm bed width 350 mm centre height 310 mm Swing diameter over bed 620 mm Swing diameter over crushing slide 410 mm cross slide - travel 310 mm spindle tunring speed 2.500 U/min power capacity 11 kW spindle bore 105 mm Main spindle nose taper MT 5 Feeds (Z/X) 7/12 m/min Rapid traverse (Z/X) 9/15 m/min number of tool places 8 Pos. tailstock quill diameter 95 mm Tailstock quill travel 220 mm tailstock taper MT 5 We believe the machine is in mint condition and can be inspected live by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Itedpfx Aoxa Hlqjaben

Condition: good (used), Year of construction: 2009, functionality: fully functional, cutting range round steel at 90°: 300 mm, - Saw band dimensions: 3660 x 27 x 0.9 mm - Max. cutting range round: 300 mm Iodpfjxgbq Uox Aabetn - Max. cutting range flat: 320 x 220 mm - Roller feed with electric length stop up to approx. 800 mm - Incl. roller conveyor approx. 4 m

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various Ijdped Iiprofx Aabjtn section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: good (used), Year of construction: 2007, Used edge banding machine - Model KAL 310 Itodpfx Aaoxhc Siebon - Year of manufacture 2007 - Including return conveyor - In good and fully operational condition - Photos & video available

Condition: used, mileage: 17,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,140 kg, first registration: 12/2020, emission class: euro6, color: blue, number of seats: 7, Year of construction: 2020, total length: 5,767 mm, total width: 2,198 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Passenger side airbag Exterior mirrors with extended support arm Tire repair kit Side airbag Seat package 29: Driver's seat (4-way electrically adjustable) – Front double passenger seat incl. side airbag and seat heating Second key with foldable remote control Itjdpfx Aaow Iy Dwsbsn Additional equipment: Overhead storage in driver's cab, driver's airbag, audio/radio remote control on steering wheel, audio system: radio with USB and Bluetooth hands-free kit, exterior mirrors electrically adjustable and heated, exterior mirrors with extended support arm, on-board computer, docking station (MyFord Dock), electronic brakeforce distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, windows in load/passenger compartment: fixed, 2nd row left, windows in load/passenger compartment: fixed, 2nd row right, FordPass Connect incl. eCall, vehicle without anti-lock braking system (ABS), reinforced alternator, lockable glove compartment, heater with recirculation function, interior lighting in driver's cab: front reading light, body/construction: double cab flatbed (standard), radiator grille with chrome trim, radiator grille black/grey, steering column (steering wheel) height and reach adjustable, engine 2.0 L – 96 kW TDCi CAT, My Key (2nd programmable vehicle key), digital radio reception (DAB+), wheelbase 3504 mm, rear seat package 1 (2 double seats, 2nd row, removable), low emissions according to Euro 6d-TEMP standard, steel wheels 6.5x16, start/stop system, Trend, lightly tinted heat-insulating glazing.

Condition: excellent (used), Year of construction: 2011, Exeron S 310 MF Year of construction: 2011 Generator hours: 26882 Control: exowin 20 x,y,z 310 x 270 x 270 mm Iedpfx Aaev Nkrdebotn c-axis 3r mounting in the head erowa chuck on the bed with magnet plate generator 64 A c-box for hard metal and pkd 20-fold changer fire extinguishing system chiller aluminium clamping plate erowa documentation machine is connected for inspection

Condition: used, mileage: 14,05,000 km, power: 228 kW (309.99 HP), first registration: 11/1999, overall weight: 18,600 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1999, Equipment: soot filter, Additional information: * Payload: 12,220 kg * Height: 3,600 mm * Width: 2,550 mm * Length: 6,150 mm * Unladen weight: 6,380 kg * Type | First axle: Michelin * Tyre size | First axle: 385/55 R22.5 * Tread depth inner left | First axle: 20% * Tread depth inner right | First axle: 20% * Maximum axle load | First axle: 7,100 kg * Type | Second axle: Michelin * Tyre size | Second axle: 395/80 R22.5 * Tread depth outer left | Second axle: 90% * Tread depth inner left | Second axle: 90% * Tread depth outer right | Second axle: 90% * Tread depth inner right | Second axle: 90% * Maximum axle load | Second axle: 11,500 kg * Wheelbase: 370 cm * Tank capacity: 700 l * Permissible load: 12,220 kg * Cabin: Yes * Price on request: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Twin wheels | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional equipment: * Aluminium fuel tank * Heated mirrors * Electric windows * Electronic Braking System (EBS) * Homepage * Cabin * Air horn * Fog lights * Parabolic suspension * Particle filter Itodpoxi Rx Tsfx Aabsn * Radio/CD player * Disc brakes * SemCollection * Side skirts * Sun visor * Spoiler * Central locking system Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors

Condition: used, mileage: 3,42,000 km, power: 228 kW (309.99 HP), first registration: 03/2002, fuel type: diesel, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 1900, Hooklift system WAF – Air conditioning – Sun visor – Beacon lights – total weight 19,000 kg -. Iedpfexizcpsx Aabjtn = Further Information = Front axle: Steering; Suspension: Leaf suspension Rear axle: Suspension: Air suspension gVW: 19,000 kg Reference number: O1 Contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar Itsdpfx Ajd Iipteabjn • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: good (used), mileage: 5,91,099 km, power: 228 kW (309.99 HP), first registration: 04/2016, fuel type: diesel, color: green, axle configuration: 4x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 6,250 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,460 mm, loading space length: 8,270 mm, loading space height: 2,170 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, trailer coupling, = Additional Options and Equipment = - Digital tachograph - Tachograph (monitoring device) - Short cab - Tail lift = Notes = Number of axles: 2, Configuration: 4x2, Curb weight: 8,560 kg, Gross weight: 18,000 kg, Total tank capacity: 400 liters, Trailer coupling, Kingpin diameter: 40 DIN, Number of locks: 1, Suspension type: Air suspension, Cab type: short cab, Cruise control, Tachograph (monitoring device), Digital tachograph, Air conditioning, Color: green, Engine output: 228 kW (306 hp), Euro: 6, Transmission type: automatic, Gears: 12, Power steering, ABS, ASR, Tail lift, Tail lift version: rear gate, Tail lift capacity: 1,500 kg, Tail lift manufacturer: Palfinger, Tail lift material: aluminum, Tail lift dimensions: 225 x 252 cm, Spare wheel, Spare wheel tread: 5 mm = Further Information = Transmission Transmission: 12 gears, automatic Axle Configuration Tyre size: 315/70R22.5 Brakes: disc brakes Axle 1: steerable; tyre tread left: 8 mm; tyre tread right: 8 mm; suspension: leaf suspension Axle 2: twin tires; inner left tyre tread: 7 mm; outer left: 4 mm; inner right: 9 mm; outer right: 12 mm; suspension: air suspension Dimensions and Weights Unladen weight: 8,560 kg Gross weight: 18,000 kg Dimensions (L x W x H): 1,039 x 255 x 345 cm Functional Tail lift: Palfinger, rear gate, 1,500 kg Loading platform height: 119 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration number: KLEYN1 Ijdpov Dri Hefx Aabstn = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. With us, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive prices • Professional transaction handling • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged swiftly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request on our website. Ask directly about our European warranty package.

Condition: used, mileage: 5,66,800 km, power: 228 kW (309.99 HP), first registration: 11/2015, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: automatic, Year of construction: 2015, CHASSIS: WJMA1VNH60C316169 TITLE: IVECO STRALIS 310 HOOKLIFT FULL AIR SUSPENSION REF: 22C55 YEAR: 11/2015 HORSEPOWER: 310 ENGINE CAPACITY: 8,710 cc EMISSION STANDARD: Euro 6 KM: 566,800 TRANSMISSION: Automatic DIFFERENTIAL LOCK: Yes RETARDER/INTARDER: No AXLES: 2 WHEELBASE: 3,805 mm TOWING CAPACITY: Yes ORIGIN: Imported CAB: Short and low SEATS: 2 PAYLOAD: 8,550 kg - GVW (Gross Vehicle Weight): 18,000 kg fully loaded - GVW + TRAILER: 44,000 kg fully loaded BODY TYPE: New hooklift HOOKLIFT MODEL: TAM T16PA.44 articulated TELESCOPIC EXTENSION: No SWING/ROTATION: Yes ROLLER: Vertical ADR: Yes, with front and rear clamps BODYWORK COMPATIBILITY FROM: 4.00 m + 0.20 m TO: 5.30 m + 0.20 m OVERALL LENGTH: 7.01 m OVERALL LENGTH WITH CONTAINER: 7.39 m ACCESSORIES: - Piping for crane and/or trailer - Alloy wheels - 315/70 tyres - Automatic bell housing REFURBISHED: Yes SERVICED: Yes Ijdpjvm Ev Sjfx Aabjtn TYRE CONDITION: 80 % PRICE: €72,500.00 + VAT The prices shown do not include VAT. Please contact the sales department for the latest pricing and terms. For more information: Loris: +39 348 477 3001 URL: #TheHookliftSpecialists AURORA HOOKLIFTS operates in the sale and purchase of industrial and commercial vehicles, with a main focus on the waste sector. Specialists in trucks, trailers, and hooklift equipment. A ready-to-deliver fleet of over 50 trucks and more than 150 containers and hooklift bodies, with or without cranes. E.&O.E. Given the large number of ads and details included, Aurora invites you to verify the accuracy of the listed information with our sales staff.

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 700 mm cutting width 250 x 320 mm cutting speed 25 - 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 120 mm 120 mm 190 mm Impact energy 190 mm connected load frequency 400 Volt total power requirement 1,5 kW Ijdpfx Ajff Efroabotn weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion

Condition: used, Year of construction: 1990, cutting diameter 320 mm saw band length 3800 x 32 x 1,1 mm capacity 90 degrees: round 320 mm capacity 90 degrees: flat 450 x 220 mm cutting speed 18 - 115 m/min total power requirement 1,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,8 x 1,6 x 1,4 m Semi-automatic mitre bandsaw Iodevu Hbrjpfx Aabstn - Mitre max. 60° - Micro-spraying device