Used Juice for sale (271)

Year of construction: 2010, condition: used, machine/vehicle number: HO1, Used Tetra Pak 4.3 T aseptic homogenizerTechnical Specifications & Performance DataThis industrial homogenizer is engineered for high-pressure processing and reliable particle-size reduction across beverage and food applications. Manufactured by Tetra Pak, the TA200 platform is recognized for stable operation, hygienic design, and robust components suitable for continuous-duty production. This unit is associated with a 250 bar rating, aligning with common requirements for dairy, juice, and beverage processing prior to filling and packaging on a used bottling line or second hand industrial packaging system.Manufacturer: Tetra PakModel: TA200Pressure rating: up to 250 bar (as indicated on the machine type plate)Design intent: High-pressure homogenization for beverage productionCE marking: PresentAseptic capability: Includes preparation/upgrading to aseptic homogenizationApplication scope: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe TA200 platform from Tetra Pak is designed to integrate with modern automation architectures used in beverage production. Typical interfaces support upstream and downstream synchronization with processing and bottling equipment. Operator-friendly controls and clear status indication help maintain repeatable results and reduce downtime.Integration-ready control interfaces for line automationProcess monitoring for pressure and flow stabilityDesigned for consistent homogenization performance at set pressureSafety interlocks aligned with industrial practiceProduction Line Integration CapabilitiesThis homogenizer is suitable for installation upstream of fillers and other bottling equipment within a used bottling line or a second hand beverage production plant. Its aseptic upgrade preparation supports integration into hygienic and ultra-clean process segments where product protection and shelf-life are priorities.Compatible with standalone or inline operationInterfaces with mixers, pasteurizers, and fillers in industrial packaging linesFlexible placement before filling of PET or glass containersSuitable for multi-product beverage workflowsMachine Condition & Maintenance HistoryThe unit is presented for sale with inclusion of preparation/upgrading to aseptic homogenization. It is positioned for rapid commissioning into beverage production environments. Routine maintenance practices can be applied in accordance with Tetra Pak guidelines to preserve performance and reliability.Commercially offered as a second hand industrial assetReady for operation subject to standard installation and commissioningOperational Performance & VersatilityHigh-pressure homogenization improves stability, mouthfeel, and product uniformity, enabling downstream filling into PET and glass packaging. The TA200 platform is widely used in beverage production where consistency and quality control are essential.Stable particle-size reduction at defined ... Podpfxjzd Ul Te Airogu

Condition: used, Year of construction: 2004, operating hours: 51,870 h, machine/vehicle number: LC692, Used Tetra Pak TBA19 200 slim V020 line, 7500 PPHTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak TBA 19 200 Slim V020 aseptic carton filling line for industrial packaging and juice beverage production. Manufactured in 2004, the line is configured for the 200 Slim carton format and includes a straw applicator for complete retail-ready package preparation.Manufacturer: Tetra PakModel: TBA 19 200 Slim V020Year: 2004Production speed: 7,500Package format: 200 SlimProcessed product: JuiceOperating hours: 51,870Included equipment: Straw applicatorAdvanced Automation & Control SystemsThe TBA 19 platform is designed for automated carton handling, forming, filling and sealing within a continuous beverage production process. The line is supplied with its complete paper documentation, supporting operation, service activities and technical reference. Electrical configuration and installed power follow the standard European TBA 19 line arrangement.The integrated straw applicator supports automated application of drinking straws to compatible 200 Slim cartons, helping prepare finished packs for downstream industrial packaging operations.Production Line Integration CapabilitiesThis second hand Tetra Pak carton filling line is suited to integration with upstream juice preparation and product supply systems, as well as downstream carton conveying, accumulation and secondary packaging equipment. It is configured as a compact filling and pack-completion solution for 200 Slim juice cartons.Machine type/categoryManufacturer/modelYearFilling MachineTetra Pak TBA 19 200 Slim V0202004Various EquipmentStraw applicatorMachines of this type typically operate as part of an aseptic carton packaging line, with conveyors and accumulation equipment coordinated to maintain a steady flow between filling and final packing stages.Machine Condition & Maintenance HistoryThe line is in operation and reported in very good condition. Recorded operating hours are 51,870. Regular Tetra Pak service has been performed at 500-hour and 2,000-hour intervals. No modifications or upgrades are reported, and spare parts are available.Operational Performance & VersatilityConfigured for juice production, this Tetra Pak filling line handles 200 Slim carton packs and incorporates straw application for consumer convenience. The format-specific configuration makes it suitable for producers seeking a used bottling line for carton-based beverage production and industrial packaging where a compact retail format is required.... Pgjdpfx Ao Adtr Noireu

Condition: like new (used), CFT Master RS 32/40/6 Automatic Triblock – Rinsing + Filling + Capping Machine AROL The CFT Master RS 32/40/6 automatic triblock is designed to integrate rinsing, filling, and capping operations for containers into a single machine within industrial beverage and liquid product lines. The equipment combines three synchronized rotary modules: a 32-position rinsing unit, a 40-valve filling unit, and a 6-head AROL capping unit, according to the 32/40/6 configuration indicated on the machine itself. This arrangement allows the entire process to be carried out, from the hygienic preparation of the empty container to its output filled and sealed, reducing transfers between independent machines. MAIN FEATURES -Manufacturer: CFT -Series / Model: Master RS -Configuration: 32/40/6 -Type: Automatic rinsing, filling, and capping triblock -Rotary rinsing unit: 32 positions -Rotary filling unit: 40 valves -Capping unit: AROL -Number of capping heads: 6 -Three operations integrated into a single monoblock Pjdpfex S Ix Sox Airogu -Automatic container feed -Synchronized transfer between modules -Internal rinsing of containers -Automatic continuous filling -Automatic cap feed and positioning -Automatic closing by AROL capping unit -Inlet and outlet transport system -Pressure instrumentation -Construction mainly in stainless steel -Enclosures and safety guards -Hygienic design for the food industry -Prepared for continuous industrial production PROCESS Empty containers automatically enter the CFT Master RS and are initially transferred to the 32-position rinsing unit, where the interior is cleaned before filling. Subsequently, they pass directly to the 40-valve filling carousel, where the product is dispensed continuously and in a synchronized manner. Once filled, the containers are transferred to the 6-head AROL capping unit, which is responsible for placing and sealing the cap. Finally, the containers automatically exit to the next stages of the line. It can be integrated with: -Depalletizers -Container conveyors -Product preparation and treatment systems -Cap feeders and orienters -Level and closure inspectors -Labeling machines -Coders -Cartoning machines -Palletizers APPLICATIONS Particularly suitable for beverage, juice, and other packaged liquid product manufacturers who need to centralize rinsing, filling, and capping operations in a single automatic unit. Container formats, product type, the exact filling system, cap type, and production capacity will depend on the configuration and tooling currently installed. The CFT Master RS 32/40/6 configuration with an AROL capping unit provides a compact solution to automate three of the main operations in a packaging line. Machine available for inspection. Additional technical information, container formats, production speed, filling type, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Pgedpfxoz E Dkxe Aireu

Condition: used, Year of construction: 2005, machine/vehicle number: M268, Used Filling Monoblock GALDI RG50 up to 3000 brick/h Pgjdpfxsvgvgue Aireu Technical Specifications of the Used Monoblock GALDI The Used Filling Monoblock GALDI RG50 up to 3000 bph offers high performance and reliability for producing fresh liquid products like milk, cream, and fruit juices. Consequently, it handles up to 3000 cartons per hour, making it ideal for medium-sized production plants that require fast and consistent output. Therefore, this machine stands out in terms of both speed and efficiency.Production Capacity and Carton SpecificationsGaldi developed the RG50 model to process up to 3000 cartons per hour. Moreover, the machine supports 0.25, 0.50, and 1-liter capacities, with cartons measuring 70 x 70 mm in B-style. Thus, these specifications ensure that Monoblock efficiently packages various formats while maintaining high operational efficiency. As a result, it offers versatility for different packaging needs.Power Supply and Energy ConsumptionThis Monoblock consumes 20 kW of power and operates at a voltage of 380V with a frequency of 50Hz. Furthermore, these energy requirements are standard for industrial machines of this class. Consequently, production facilities must ensure their electrical infrastructure can meet these demands to avoid any compatibility issues or operational disruptions. In addition, careful planning will help avoid unnecessary delays in production.Year of Manufacture and Operating ConditionsGaldi manufactured the Used Filling Monoblock GALDI RG50 up to 3000 bph in 2005. Although the machine has logged 22,506 hours of production, after receiving full servicing in 2019, it remains fully operational. Therefore, the machine is currently in storage and is available for sale in “as is” condition. Additionally, its recent maintenance ensures smooth operation, increasing its value.Dimensions and WeightThe machine measures 4.70 meters in length, 2.45 meters in width, and 2.85 meters in height, with a total weight of 2500 kg. Consequently, these compact dimensions allow for easy integration into existing production layouts. Hence, production teams must ensure there is sufficient space for installation and future maintenance access. Ultimately, proper planning of the workspace guarantees seamless installation.Compatible ProductsThe Used Filling Monoblock GALDI RG50 up to 3000 bph processes fresh liquid products like milk, cream, and juices. Its technology, therefore, maintains the quality of sensitive products, preserving their organoleptic properties throughout the bottling process. Therefore, operators must ensure the products meet the machine’s specifications to avoid any issues in quality or disruptions in production. Moreover, adhering to these requirements helps maintain a smooth operation.Conclusion of the Used Monoblock GALDIIn summary, the Used Filling Monoblock GALDI RG50 up to 3000 bph offers a reliable and versatile solution for plants bottling fresh liquid products. Its ability to handle multiple carton formats and its well-maintained condition make it a cost-effective choice for those looking for an efficient used machine. Additionally, with proper installation and configuration, the machine will optimize production and maximize bottling efficiency.

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Pjdsz D Hmmjpfx Airogu Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: used, Year of construction: 2023, operating hours: 100 h, machine/vehicle number: R91, Used SRAML RBB-LT300 bag in box filler machine - Year 2023Technical Specifications & Performance DataThe Sraml RBB-LT300 is a compact, single-head Bag-in-Box filling machine engineered for reliable hot-fill applications in beverage production. Designed for industrial packaging environments, this unit supports a wide range of bag sizes and delivers consistent, hygienic fills that meet modern quality expectations. As part of a used bottling line or as a standalone filler, it offers dependable throughput and straightforward integration with downstream packaging machinery.Manufacturer: SramlModel: RBB-LT300Year: 2023Production speed: Up to 260 bags/hour (at 5.0L)Formats: Compatible with 3.0L to 20.0L Bag-in-BoxFilling heads: 1Neck/fitment: VitopPower: 1.5 kWVoltage/Frequency: 400 V / 50 HzDimensions (L x W x H): 930 mm x 1170 mm x 2090 mmWeight: 120 kgAdvanced Automation & Control SystemsThe RBB-LT300 is built for efficient, repeatable operations with simplified operator controls and process reliability. It includes an integrated buffer tank to stabilize product flow and a CIP attachment point to connect with plant cleaning systems, supporting hygienic operation and reduced changeover downtime. Quick mechanical adjustments enable efficient format transitions across supported bag sizes without complex tools.Integrated buffer tank for stable product feedingCIP attachment for streamlined cleaning integrationHot-fill oriented design suitable for juice applicationsOperator-friendly controls for setup and run modesConsistent dosing accuracy with a single filling headProduction Line Integration CapabilitiesThis Bag-in-Box filler can operate as a standalone station or be integrated into a complete second hand or new industrial packaging line. It pairs naturally with case/box handling, carton erecting, packing, and palletizing solutions. The machine’s footprint and utilities make it straightforward to position upstream of sealing and boxing stations in beverage production environments.Standalone or inline operationCompatible with Bag-in-Box downstream equipmentFlexible format range from 3.0L to 20.0LIdeal for integration in used bottling line upgradesMachine Condition & Maintenance HistoryManufactured in 2023 and showing under 100 operating hours, this unit presents as a late-model, low-use filler. It is functional and ready for operation, offering a near-new alternative for producers seeking dependable performance without the lead times of new equipment.Low-use machine with under 100 hoursFunctional and ready for operationRecent manufacturing year supports long service lifeOperational Performance & VersatilityOptimized for hot-fill beverage production, the RBB-LT300 handles Bag-in-Box applications for products such as apple juice and similar liquids... Pgedpjzrgrnjfx Aireu

Year of construction: 1990, condition: excellent (used), A used juice press/apple press is offered for sale. Year of manufacture: 1990s. Psdpoh U A Sbofx Airegu In very good condition.

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Pgsdpjx T Aqfefx Airsu Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Year of construction: 2009, condition: refurbished (used), This floor standing unit is designed to help you create fruit coulis and purées, vegetable mousses, sauce bases, bisques and fish soups by separating pips, stones, fibres and carcasses without crushing them. The continuous feed system makes it easy to use and a great time saver. Hopper : Continuous feeding of prepared ingredients for increased productivity. Perforated basket :Your products fall inside the basket where they are strained. End product ejection chute:The ready to use pulp is ejected here and is free of pips, stones, skin, fibres and bones. Waste ejection chute: skins, pips, stones, tails, bones, shells, fibres… Pedpjz R Id Iofx Airogu Paddles: Paddle assembly rotating at 1500 rpm to extract maximum pulp and juice. Production of Pulp: 120 kg per hour Electrics: Single Phase 900 W Rpm: 1500 Dimensions: 1 030 x 400 x 860 Weight: 45kg Available: 1 week for Preparation

Condition: used, Year of construction: 1983, - Closed press drum, steel, coated - Tank capacity: 30 hl - Last used: Harvest 2025 - Membrane: PVC, year 2018 - Juice pan: large stainless steel pan, "drawer with suspension" version, connection DIN - DN50 - Central filling - Without feet, with wheels - Machine in operational condition Dimensions: - Length: 4500 mm - Width: 1900 mm - Height: 1600 mm (without wheels) Pgodpfjy Nmc Dox Airou

Condition: good (used), Year of construction: 1995, - Elastic membrane in good condition - Membrane in very good condition - Machine with integrated compressor - With central filling, ball valve DN 80 - With pressure switch and alarm siren - Feet: H: 500 mm - Sensors in the juice tank for controlling the must pump - Machine in good condition Pgodpfsznlpdex Airsu

Condition: excellent (used), Year of construction: 2000, - Year of manufacture: 2000 - Membrane: 2024 Podpfxezc H Sws Airsgu - With 2 large filling doors - With central filling system - With large juice collection tank - With foot extensions, height 200 mm - Last used: Harvest 2025 - Machine in very good condition Dimensions: - Length: approx. 4,700 mm - Width: approx. 1,900 mm - Height: approx. 2,000 mm

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Weight: 1200 kg Podpfeyr Ic Njx Airjgu Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge

Condition: excellent (used), TETRA PAK SPIRAFLO – Aseptic Multitubular Heat Exchanger Aseptic multitubular heat exchanger TETRA PAK SPIRAFLO, designed for the continuous thermal treatment of liquid and viscous food products in industrial process lines. The Tetra Spiraflo system uses tubular heat exchange technology to perform indirect heating and cooling operations, keeping the product and the heating fluid separate. Its multitubular configuration makes it particularly suitable for pasteurization, UHT treatment, aseptic processing, heating, cooling, and heat recovery processes. MAIN FEATURES -Manufacturer: TETRA PAK -Series: Tetra Spiraflo -Type: Aseptic multitubular heat exchanger -Technology: tubular/multitubular heat exchange -Hygienic construction in stainless steel -Continuous thermal treatment -Indirect heating and cooling of the product -Multiple heat exchange sections -Sanitary connections -Suitable for pasteurization and UHT processes -Integrable into aseptic processing lines -Designed for continuous industrial use Podpfxozm U Nqj Airsgu APPLICATIONS Depending on the configuration of the installation, the Tetra Pak Spiraflo can be used for: Preheating and heating Pasteurization UHT treatment Aseptic processing Cooling Heat recovery Thermal conditioning prior to filling It can be integrated with process tanks, pumps, homogenizers, deaerators, holding tubes, aseptic tanks, and filling systems. Particularly suitable for the dairy, beverage, juice, processed fruit, sauce, and liquid food industries, and depending on its configuration, can be used with milk, juices, beverages, purees, concentrates, sauces, and other products that require controlled thermal treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) Pjdpfx Aozk Eqmjiregu - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: excellent (used), Gravity-Fed Linear Filler – Stainless Steel Automatic, gravity-fed linear filler made of stainless steel, designed for the continuous filling of liquid products into bottles, jars, and other rigid containers within industrial packaging lines. The equipment incorporates multiple filling nozzles arranged in a line, allowing for the simultaneous processing of several containers. The product is dispensed by utilizing gravity, providing a simple and efficient solution for low-viscosity liquids and products with good flow characteristics. Its construction primarily in stainless steel, integrated conveyor, and protected filling area make it particularly suitable for professional applications in the food and beverage industry. MAIN FEATURES -Type: Automatic, gravity-fed linear filler -Filling system: Gravity feed -Linear, multi-nozzle configuration -Simultaneous filling of multiple containers -Automatic container feeding -Controlled positioning under the nozzles -Integrated infeed and outfeed conveyor -Continuous industrial operation -Construction primarily in stainless steel -Product distribution circuit -Enclosed filling area with guards -Hygienic design for the food industry -Compact and robust construction -Integrable into automatic packaging lines PROCESS The containers are automatically transported to the filling area, where they are positioned under the different nozzles. Once positioned, the filling process is carried out using gravity, taking advantage of the height difference and the natural flow of the product to introduce it into the containers. At the end of the cycle, the containers are released and automatically continue to the next stage of the line. This filling principle is particularly suitable for liquid and fluid products with low viscosity. It can be integrated with: Container feeders Feed tanks Transfer pumps Capping and sealing machines Twist-off closing machines Weight checkers Inspection systems Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Particularly suitable for food industries, beverage manufacturers, canning companies, liquid sauce producers, and packaging companies that need to automate the filling of fluid products. Depending on the installed configuration and the characteristics of the product, it can be used for water, juices, beverages, vinegars, brines, oils, liquid sauces, and other low-viscosity products. Its linear, multi-nozzle configuration, gravity-fed filling, and stainless steel construction provide a versatile solution for industrial packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request. Psdpfx Aijzxch Sjregu

Condition: excellent (used), Year of construction: 1998, - Container volume: 1200 l - Elastic membrane, new, 2026 - Machine with integrated compressor - With central filling, ball valve DN 80 Pgedeznlntjpfx Airju - Feet: H: 300 mm - Sensors in the juice tank for must pump control - With discharge cart for testing purposes - Machine in very good condition, little use

Condition: used, Separator for clarifying fruit juice Additional title: Plate centrifuge with self-emptying drum Drum speed: 5000 rpm Pgodpfxoztx S No Aireu Density liquid: 1000 kg/m³ Density solid: 1200 kg/m³ Features: Centrifuge, motor, sludge discharge, control cabinet

Condition: used, This listing is for a Fristam FPE742/185A Centrifugal Pump. The unit is in full working condition and is ready for immediate release. Psdpfxexxy D Rs Airjgu This Unit was installed new in 2015 by Freestead Process Technology. Product Overview: The Fristam FPE742 5.5KW Centrifugal Pump is a robust and versatile sanitary pump engineered for hygienic applications in industries such as food and beverage, pharmaceuticals, and biotechnology. With advanced design features and high-quality materials, this pump provides efficient, reliable, and gentle product handling, even at high volumetric flows. Its superior construction and innovative engineering make it a durable and reliable choice for critical processes. Key Features Hygienic Design: Close internal clearances as tight as 0.5 mm enhance efficiency while ensuring sanitary operation. Designed for gentle handling of sensitive products, preserving their quality and integrity. Advanced Engineering: Optimized Impeller Design: Maximizes efficiency while ensuring low NPSH requirements, reducing cavitation risks for smooth and quiet operation. Handles high volumetric flows while maintaining gentle product handling. Robust Construction: Made from 316L stainless steel castings and forgings, providing exceptional mass, strength, and durability. Resistant to hydraulic shock and cavitation, which can damage other pumps in demanding applications. Ease of Maintenance and Installation: Features a self-aligning shaft for quick and easy installation and gapping. A concentric collar on the shaft prevents run-out, protecting the seal from wear and damage, extending the pump’s lifespan. Applications: Food & Beverage: Dairy, juices, and hygienic liquid handling processes. Pharmaceuticals: Transferring high-purity and sensitive products. Biotechnology: Supporting shear-sensitive biological processes.

Condition: used, Year of construction: 2001, GIANAZZA Vacuum Evaporator - Grape Must Concentration Plant Description: Professional industrial plant for the concentration of grape must and fruit juices. Manufactured by the world-renowned Italian specialist Gianazza Technology, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Gianazza Technology SpA (Italy) Pgodpfx Ajy R I Dxeirju Year of Construction: 2001 Material: High-grade Stainless Steel (Inox) System Type: Multi-stage Vacuum Evaporator Components Included: * Main Evaporation Columns Complete Control Panel (Digital PID Controllers) Pumping Station (Salvatore Robuschi centrifugal pumps) External Cooling Tower / Heat Exchanger unit Stainless Steel Storage/Buffer Tank Condition: Professional industrial condition, regularly maintained within a winery environment. Applications: Enrichment of grape must (Sugar concentration). Production of Rectified Concentrated Must (RCM). Fruit juice concentration.

Condition: like new (used), FMC FoodTech 2,000 L Vertical Tank – Stainless Steel and Flat Bottom FMC FoodTech 2,000-liter vertical tank made of stainless steel, designed for the storage, accumulation, and handling of liquids in industrial food and beverage processing. Manufactured in stainless steel, it features a vertical cylindrical configuration with a flat bottom and support structure, providing a robust and hygienic solution for storing water, liquid ingredients, and other products used in food processing. Manufactured by FMC FoodTech, this tank is particularly suitable for integration into food, beverage, juice, fruit, and citrus processing facilities. MAIN FEATURES -Manufacturer: FMC FoodTech -Capacity: 2,000 liters -Type: Vertical storage/process tank -Configuration: Vertical cylindrical -Bottom: Flat -Stainless steel construction -Mounted on stainless steel legs -Bottom outlet connection -Hygienic construction -Designed for industrial food applications -Integrable into existing process facilities -Robust construction for industrial use Pgjdezwv Ngjpfx Airju APPLICATION The FMC FoodTech 2,000 L tank provides an industrial solution for the storage, accumulation, and intermediate holding of liquids within food and beverage production processes. It can be installed as a stand-alone tank or integrated into a complete line as a buffer or intermediate tank between different stages of the process. Depending on the characteristics of the product, it can be used for: -Water storage -Juices and beverages -Liquid food products -Liquid ingredients -Process water -Intermediate product accumulation -Fruit and citrus processing -Buffer tank between production stages APPLICATIONS A particularly suitable solution for food industries, beverage manufacturers, juice producers, and fruit and vegetable processors who need a stainless steel tank for storage or intermediate accumulation. Its 2,000-liter capacity allows it to be integrated as both a stand-alone unit and within complete industrial lines. The stainless steel construction facilitates its use in applications where hygiene, ease of cleaning, and corrosion resistance are required. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2008, Overview This blowing machine was manufactured in 2009 by Italian manufacturer SIPA. The machine was part of a complete non‑returnable PET bottle filling line dedicated to juices production. It was used to produce small formats as 0.2 - 0.25 and 0.5 L PET bottles and operated at a nominal speed of 12,500 bottles per hour. The machine is described as being in perfect condition since it had been dedicated for a small private label production. The equipment becomes available as the seller has finished the production dedicated to fruit juices. Technical data - Capacity: 12.5000 bottles/hour - Year of manufacture: 2009 - Formats: 0.2 - 0.25 and 0.5 L - Application: Juices - Container material: PET - Neck finish: 38 mm - Air conveying system available Scope of supply - blow moulder Sipa SFR EVO 8 (2009) Podpfszb Adtex Airogu - preform feeding - preform container - preform tilting device - spare parts available - air conveying system available

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Pjdpsu Tyzqsfx Airjgu

Condition: excellent (used), functionality: fully functional, overall weight: 1,200 kg, type of input current: three-phase, power: 11 kW (14.96 HP), rotational speed (min.): 6,500 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, CLARIFIER FOR JUICES , WINES , OILS 11KW , UPT TO10 MC/H IMMA MICRO 5,5 KW , 2MC/H =7500 EURO Pgjdezv I Acjpfx Airju