Used Juice for sale (252)

Condition: new, functionality: fully functional, - this machine is also available with 6-positions filler capacity (10l bags) 750 l/h electric outlet 230V 50Hz (single phase) fuse 13 A dimensions: length 1 280 mm width 790 mm height 1 075 mm weight 85 kg material 1.4301 / AISI 304 filling accuracy ± 0,5 % compressed air connection 6 bar juice supply connection Ø 19 mm juice supply tank 54 l suitable for: Chedpou Nk Tlefx Aptsb hot filling of fruit and vegetable juices into 3, 5, 10 and 20 l bags scope of delivery cleaning adapter unit

Condition: new, Nominal capacity: 400 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx.: 35 kW Electrical Rating: 1.4 kW Electrical Connection: 230V 50Hz (1 phase) Electrical protection: 16 A Dimensions: Length: 910 mm Width: 960 mm Height: 1 850 mm Cjdpfx Apodix Rcjtehb Weight (heating circuit drained): 260 kg Weight (heating circuit filled): 360 kg Heating oil consumption approx.: 3,5 litres/h Max. exhaust temperature: 180°C Noise level (LW, A): 83 dB Flue gas connection: ø 150mm

Condition: new, capacity: up to 7 000 kg/h electric outlet: 3kW 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 4 435 mm width: 2 250 mm height: 2 160 mm insertion resp. discharge height: 1 430 mm belt width: 1 100 mm spread width: 320 - 870 mm spread height (infinitely adjustable setting): 10 - 50 mm weight: 3 400 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,5 - 6 min water consumption for cleaning: 20 l/min connections: Chedpfx Ajdix N Hopteb sewage connection: Ø 75 mm juice discharge connection: DN 40 juice discharge height: 200 mm sewage discharge height: 100 mm pomace discharge height: 800 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: new, Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Chedpfx Apob Nu Scjtsb Weight 14 kg Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ " Connection for juice outlet 1¼ "

Condition: new, capacity: up to 1 000 kg/h power: drive Motor: 0,75 kW brush cleaning: 0,37 kW high-pressure cleaner: 4,7 kW electric outlet: 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 2 145 mm width: 1 270 mm height: 1 290 mm insertion resp. discharge height: 1 290 mm belt width: 580 mm spread width: 240 -460 mm spread height (9 stages): 10 - 50 mm weight: 665 kg material: 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuous): 2,1 - 5,5 m/min lead time: 0,6 - 1,6 min Chododix Icopfx Aptjb water consumption for cleaning: 3 l/min connections: sewage Connection: DN75 juice discharge Connection: 1 ½ “ juice discharge height: 305 mm sewage discharge height : 86 mm pomace discharge height: 745 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: new, capacity: up to 3 000 kg/h electric outlet: 3,5kW 400V 50Hz (3 phases) fuse 16 A dimensions: length: 3 720 mm width: 1 730 mm height: 2 110 mm insertion resp. discharge height: 1 430 mm belt width: 660 mm spread width: 220 - 440 mm spread height (infinitely adjustable setting): 10 - 40 mm weight: 2 200 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,4 – 4,2 min water consumption for cleaning: 10 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 25 Codpfodix I Ujx Aptohb juice discharge height: 130 mm sewage discharge height: 50 mm pomace discharge height: 810 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line type: Blow, fill, cap, label, wrap, and palletizeConfiguration: Integrated continuous production with matched throughput across stationsAdvanced Automation & Control SystemsThe line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment.Centralized line control with coordinated drives for consistent throughputOperator-friendly interfaces for speed matching and format adjustmentsSafety guarding and interlocked access doorsEmergency stop circuitry across critical stationsQuick-change features to support format and product adjustmentsProduction Line Integration CapabilitiesThis second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats.Inline operation from blow molding to palletizingCompatible with PET cylindrical bottle formats; validated at 0.5L, 0.3L, 1.5L Hot-fill processing designed for juice productsEnd-of-line shrink wrapping and palletizing for stable distribution packsPotential to adapt speeds and formats within the design envelope of each componentMachine Condition & Maintenance HistoryThe line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment.Operational status: I... Chsdpfx Apezgtpvoteb

Year of construction: 1998, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Complete Technological Line for tomato paste production - 3-stage vacuum evaporators Professional industrial plant for the concentration of tomato juice and fruit juices. Manufactured by the experienced Bulgarian manufacturer Thermohran Engineering, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Thermohran Engineering Ltd. (Bulgaria) Cedezfx Dvjpfx Aptohb Year of Construction: 1998 Material: High-grade Stainless Steel (Inox) System Type: 3-stage Vacuum Evaporator Components Included: * Main Evaporation Columns II.5. GENERAL LAYOUT DATA OF THE COMPLETE LINE Capacity (processed tomatoes) t/24h 150 Product capacity 28-30 oBrix kg/h 1 000 Steam consumption kg/h 4 000 Tap water consumption m3/h 10 Sealing water consumption m3/h 0.7 Electrical consumption kW/h 147 Water consumption t = 18 oC m3/h 78 t = 28 oC m3/h 195 Air consumption at P= 4 bar nm3/h 7 Mounting area m 6x40x6m (in the area of the evaporating installation the height must be 13 m) Complete Control Panel (Brix meter) Pumping Station (centrifugal pumps) External Cooling Tower / Heat Exchanger unit Applications: Enrichment of tomato juice (Double and Triple Concentrate). Fruit juice concentration.

Condition: used, machine/vehicle number: LC555, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 Chsdjwkux Njpfx Apteb The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities. For instance, companies manufacturing milk, plant-based drinks, or fruit juices can benefit from the line’s ability to maintain sterility without cold chain logistics. In fact, the full integration of Tetra Pak modules allows manufacturers to achieve high energy efficiency, complete batch traceability, and reduced d...

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. Chedpfx Asu Nad Tsptjb The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, conveyor belt length: 15,000 mm, production capacity: 6,000 unit/h, For sale is a complete filling system from the manufacturer Tetrapak, consisting of the following components: TBA 8 filling system (year of manufacture: 1994) Chjdpfx Apszh H Stotob Tetra Cap Applicator 21 (Recap 3) (year of manufacture: 2003) Tetra Carton Packer 70 (year of manufacture: 2002) Inkjet printer EBS 6500 approx. 15 m of conveyor belts with motors and brakes Spare parts A list of the included spare parts can be found in the attached document. TECHNICAL DETAILS Production capacity: 6000 units/h Conveyor belt length: approx. 15 meters MACHINE DETAILS Operating hours filling system: 85,286 h Operating hours cap applicator: 36,416 h Operating hours carton packer: 38,626 h EQUIPMENT Tetrapak TBA 8 filler without pull tab Tetra Cap Applicator 21 (Recap 3) Tetra Carton Packer 70 Inkjet printer EBS 6500 The machine's maintenance has been carried out exclusively by Tetrapak in recent years.

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks Csdpfsvtgaxox Aptohb The machine is isobaric

Year of construction: 2010, condition: used, machine/vehicle number: HO1, Used Tetra Pak 4.3 T aseptic homogenizerTechnical Specifications & Performance DataThis industrial homogenizer is engineered for high-pressure processing and reliable particle-size reduction across beverage and food applications. Manufactured by Tetra Pak, the TA200 platform is recognized for stable operation, hygienic design, and robust components suitable for continuous-duty production. This unit is associated with a 250 bar rating, aligning with common requirements for dairy, juice, and beverage processing prior to filling and packaging on a used bottling line or second hand industrial packaging system.Manufacturer: Tetra PakModel: TA200Pressure rating: up to 250 bar (as indicated on the machine type plate)Design intent: High-pressure homogenization for beverage productionCE marking: PresentAseptic capability: Includes preparation/upgrading to aseptic homogenizationApplication scope: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe TA200 platform from Tetra Pak is designed to integrate with modern automation architectures used in beverage production. Typical interfaces support upstream and downstream synchronization with processing and bottling equipment. Operator-friendly controls and clear status indication help maintain repeatable results and reduce downtime.Integration-ready control interfaces for line automationProcess monitoring for pressure and flow stabilityDesigned for consistent homogenization performance at set pressureSafety interlocks aligned with industrial practiceProduction Line Integration CapabilitiesThis homogenizer is suitable for installation upstream of fillers and other bottling equipment within a used bottling line or a second hand beverage production plant. Its aseptic upgrade preparation supports integration into hygienic and ultra-clean process segments where product protection and shelf-life are priorities.Compatible with standalone or inline operationInterfaces with mixers, pasteurizers, and fillers in industrial packaging linesFlexible placement before filling of PET or glass containersSuitable for multi-product beverage workflowsMachine Condition & Maintenance HistoryThe unit is presented for sale with inclusion of preparation/upgrading to aseptic homogenization. It is positioned for rapid commissioning into beverage production environments. Routine maintenance practices can be applied in accordance with Tetra Pak guidelines to preserve performance and reliability.Commercially offered as a second hand industrial assetReady for operation subject to standard installation and commissioningOperational Performance & VersatilityHigh-pressure homogenization improves stability, mouthfeel, and product uniformity, enabling downstream filling into PET and glass packaging. The TA200 platform is widely used in beverage production where consistency and quality control are essential.Stable particle-size reduction at defined ... Chedpfx Aszd Ul Tsptsb

Condition: good (used), Kecol Maxiprime 800 drum pump Chodju S Rkmopfx Aptsb Stainless, pneumatically operated, 130L per min, up to 12mm solids, previously used for pumping fruit juices out of tote bins

Condition: new, Year of construction: 2017, Item: AL-10509-CSF Pump 7.5kW CSF Inox Self-Priming Pump – Type ASH65-4-10/BM.CDPZTH1 Manufacturer: CSF Inox S.p.A. – Montecchio Emilia, Italy Model: ASH 65-4-10/BM.CDPZTH1 Year: 2017 (newer, used) Material: Stainless steel AISI 316L Power: 7.5 kW Speed: 1450 rpm Voltage: 400/690 V – 50 Hz ATEX certification: II 2G c T3 (Zone 1) Connection: 3″ sanitary fittings Condition: Very good, unused – stored in original wooden crate Description: High-quality stainless steel centrifugal pump from CSF Inox, suitable for use in hygienic and ATEX environments. The ASH-series pumps are designed for gentle and efficient transfer of liquid food products, beverages, dairy, and chemical solutions. The low-speed 1450 rpm motor provides smooth operation with reduced shear and foaming – ideal for milk, cream, wine, juice, or CIP applications. Chjdpfx Ajzfhcnspteb The pump housing, impeller, and shaft are made entirely of AISI 316L stainless steel, ensuring long service life and corrosion resistance. Typical Applications: Dairy and food processing lines Beverage, wine, and juice plants CIP cleaning systems Chemical and pharmaceutical installations ATEX classified areas Status: Ready for immediate delivery Location: Denmark

Condition: good (used), Year of construction: 1995, - Elastic membrane in good condition - Membrane in very good condition - Machine with integrated compressor - With central filling, ball valve DN 80 Chedpfxsznlpdo Apteb - With pressure switch and alarm siren - Feet: H: 500 mm - Sensors in the juice tank for controlling the must pump - Machine in good condition

Condition: excellent (used), Year of construction: 1998, - Container volume: 1200 l - Elastic membrane, new, 2026 - Machine with integrated compressor - With central filling, ball valve DN 80 Chjdeznlntjpfx Aptob - Feet: H: 300 mm - Sensors in the juice tank for must pump control - With discharge cart for testing purposes - Machine in very good condition, little use

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks Chedpezp Hkxsfx Aptsb The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Year of construction: 2024, condition: new, The pasteurizer is suitable for heat treating liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. The heat treatment is carried out via a heat exchanger equipped with a stainless steel tube coil. The thermal energy is provided by a heating oil boiler. The temperature of the heating water is regulated by the boiler control. The temperature control of the treated liquid is achieved by a controlled switching valve. Temperature is monitored at two points: once in the heating medium and once at the product outlet. The device regulates the temperature of the heating medium automatically. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the desired temperature, the output of the device is blocked and the juice circulates in the bypass system until the temperature reaches the set level. After that, the device allows filling again. After work is finished, the tube coil can be cleaned very easily using a sponge ball system. The device requires only minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (when heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Fuel: Diesel or gas Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Protection class: IP65 Connections: DN 25 Exhaust pipe: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Low maintenance Options: Manual bag-in-box filling device Cedpfx Apev Srw Tjtehb Semi-automatic bag-in-box filling device 3-head bottle filling module Accessories: Sponge balls for cleaning

Year of construction: 2026, condition: new, The pasteurization system is fully automated with an industrial control system and touchscreen operation. If the temperature of the juices to be pasteurized drops below the desired temperature, the outlet side of the machine is shut down, and the juice is directed through the bypass until the desired temperature is reached again. Filling can then resume. At the end of the cycle, the spiral pipe can be easily cleaned with a sponge ball. Our system is low-maintenance. ⚙️ Technical Information Rated capacity: 400 L/h Power requirement: 27 kW, 400 V, 40 A Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Chjdpfx Aev Srl Roptob Weight: 170 kg Optional with filling equipment

Year of construction: 2025, condition: new, Stainless steel bottle filler with 3 filling heads The bottle filler with pump is made entirely of stainless steel. The filler is equipped with heavy-duty, industrial filling heads that allow for automatic and adjustable filling height of the bottles. The system is suitable for wine, beer, oil, detergents, and more. • Made entirely of stainless steel, including all connections, floats, and nuts • Can be steam sterilized • Capacity: 130 l/hour per filling tube • With mechanical float valve in the reservoir • 3 filling heads • Optionally with pump This bottle filler is equipped with filling heads for fruit juice as standard. ⚙️ Technical information Capacity: up to 400 L/h Material: WNo. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Chjdpfxov Srcij Apteb Weight: 22 kg With bottle filler: 28 kg

Year of construction: 2025, condition: new, These tanks are ideal for cider mills and wineries for contract pressing. They can serve multiple customers simultaneously and continuously without having to stop pressing. With the help of valve settings, you can designate the specific tank for specific customers. The juice does not mix with other juices. Depending on customer preferences, we manufacture containers in various sizes: 200 L, 500 L, 1000 L. Technical Information • Capacity: 300 L (3x100L) • Material: Wnr. 1.4301, AISI 304 stainless steel • With floating lid • Fill level indicator Dimensions: • Length: 1250mm • Width: 508mm • Height: 350mm • Diameter: 398mm • Overall height: 1100mm • Tank height without legs: 850mm • Leg height: 250mm • Weight: 60kg Codpfx Apjtpxm Dstshb The dimensions apply to one container!

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: Chsdpfx Aov Sq S Nsptob • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Chodpfx Apjv Sq Nbjtob Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Year of construction: 2026, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Chsdpfx Apov Sq Rxetob Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining