Used Kaltenbach Kks 400 for sale (119)

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 volt 380 V frequency 50 Hz weight of the machine ca. 500 t Iedpfx Acepxri Usroth

Condition: used, Max. saw blade diameter: 400 mm Itodpsxn Nwlefx Acrsh Pneumatic material clamp Manual feed

Condition: good (used), Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Itsdpsx Rvb Ssfx Acroh Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm Itedpfx Acjxabg Aeroh capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Condition: good (used), Year of construction: 1968, Saw blade diameter 370 mm Itjdpfx Aerwyfqecrsh Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speed 30, 60, 130 and 260 m/min Motor power approx. 2.6 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Weight 850 kg Accessories / Special features: - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. - Hydro-pneumatic stepless saw blade feed - Mitre cut on both sides R - L - 0° longitudinal cut possible - Coolant system - 1 saw blade Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), functionality: fully functional, For sale: Hans Kaltenbach MSK 400 saw. Itedpfxoxxu T Hj Acreh

Condition: like new (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 150 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, Kaltenbach KKS 450E – very neat used machine from 2018 with 6 months warranty. Isdpfx Acjyr S Szorsth Extra options: * Micro-dosing system & wet cooling * Horizontal (hydraulic) clamping cylinder 1 x The KKS 450E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chrome steel, brass, copper, bronze, etc. Benefits at a glance: - Clamping, sawing, reversing and releasing – all with a single lever - Saw height adjustable via a lever - User-friendly mechanical controls mounted directly on the machine - Excellent accessibility for saw blade changes and maintenance - Workpiece clamping device on both sides of the saw blade - Two cutting speeds for virtually all applications - Ergonomically positioned controls for user comfort - Adjustable sawing stroke limitation and rapid saw blade return All pre-owned Kaltenbach machines are supplied with a 6-month warranty as standard. Transport and installation available throughout the Benelux.

Condition: good (used), Year of construction: 1991, functionality: fully functional, overall weight: 1,350 kg, Kaltenbach KKS 401 Fully functional Ijdjui R Dpjpfx Acrjth Condition very good.

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 450 mm, cutting range round steel at 90°: 150 mm, Kaltenbach KKS 450 E, fully refurbished with 12 months warranty. The KKS 450 E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chromium steel, brass, copper, bronze, etc. Key advantages at a glance: - Clamping, sawing, turning, and opening – all with a single lever Ijdpeynut Tofx Acroth - Adjustable saw height using a lever - User-friendly mechanical controls mounted directly on the machine - Easy access for saw blade changes and maintenance work - Workpiece clamping system on both sides of the saw blade - Two sawing speeds suitable for virtually all applications - Ergonomically positioned controls for ease of use - Adjustable stroke limit and rapid return of the saw blade All refurbished Kaltenbach machines are supplied as standard with a 12-month warranty.

Condition: like new (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm 45° max: Working range round: 90° max.: 140 mm 45° max: Feed length single stroke: 5-1000 mm Multiple stroke: 5-9999 mm Feed speed AC servo max: 500 mm/s Weight(saw)approx.:3100 kg Dimensions LxWxH( saw)approx.:2500mm x 1300mm x 2100mm Footprint LxW: 2500mm x 1300mm Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and problem-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Itjdpfxjuiy R Re Acreh Optional: - Sink scraper - Extended feed unit 2000mm - Chain magazine for 6m of material - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: new, saw blade diameter 400 mm capacity 90 degrees: round 135 mm capacity 90 degrees: square 130 mm 200 x 80 mm saw blade turning speeds U/min total power requirement kW weight of the machine ca. 1,2 t Itedpfovn U Hvex Acrjh dimensions of the machine ca. 2,0 x 1,8 x 1,95 m Automatic circular saw with - Feed type RB 1500 - Roller conveyor 1500mm Good condition

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Ijdpfx Acoyv Uvxeroth Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Year of construction: 1970, condition: used, Metal circular saw KKS 350 Itedohrzahopfx Acrsh Blade diameter 350 mm

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: Iedpformkl Aex Acreth - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: refurbished (used), TECHNICAL DESCRIPTION KKS 450 KKS 450 Semi-automatic, hydraulic universal circular saw with rotary table for mitre cuts Itsdex N Ncaepfx Acroh SAW BLADE Segmented saw blade Blade mount according to DIN 8576 ☐ 400 x 4 ☒ 450 x 4 mm 50/4 x 14/80 mm WORKING RANGE Round material 90°/45°: 125 / 150 mm Square material 90°: 115 / 140 mm 45°: 110 / 130 mm Flat material 90°: 305 x 40 / 330 x 40 mm 45°: 235 x 30 / 250 x 40 mm U-profiles upright 90°/45°: 120 x 55 / 140 x 60 mm U-profiles horizontal 90°: 240 x 85 / 280 x 95 mm 45°: 180 x 70 / 220 x 80 mm Cut lengths from 10 mm DRIVE POWER Saw motor: 1.8 / 2.7 kW Hydraulics: 1.5 kW Coolant pump: 0.1 kW CUTTING SPEEDS (Standard) 11.5 / 23, 13 / 26 m/min or 10 / 20, 11 / 22 m/min or 13 / 26, 15 / 30 m/min SAW BLADE FEED Continuously adjustable as per table: 0 - 1,000 mm/min Blade rapid return: 3,300 mm/min ELECTRICAL CONNECTION TN-S system – 3 phases, neutral, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: used, Saw blade Ø: 1310 mm round 440 mm square 400 mm flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm Dimensions 2870+380 x 1320 x 2700 mm (LxBxH) weight circa 7500 kg Iedobzg R Topfx Acroth

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm capacity 90 degrees: round 150 mm Ijdjyv N Naspfx Acreth capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min rapid return speed 1650 mm/min 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) Itodpfxoy Dcrwj Acrjh - Saw blade diameter: 400/450 mm - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw - Operating voltage: 3 x 400 V - Frequency: 50 Hz Itsdpfoy Dcr Dex Acreh - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Piła Kaltenbach Kaltenbach KBR 371 NA/ABG rocznik 2004 sterowna numerycznie CNC Sterownie: Siemens Piła w pełni automatyczna z podajnikiem materiału dwustanowiskowym. Itodpewqr Ubsfx Acrjh Podajnik materiału z magazynem w pełni automatycznym. W pełni sprawna w bardzo dobrej kondycji -serwisowana.

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min Itodsy At Iyjpfx Acreh DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Year of construction: 1994, condition: used, Max. saw blade diameter: 350 mm Manual material clamp Itodpfxoud Uvke Acreh minimum quantity spraying Digital angle indicator

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Itjdpfx Aswtdi Aecreh Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Itjdpfx Acedzqtgjreh Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: used, Year of construction: 2022, machine/vehicle number: 0102-260011, Kaltenbach KBS750 DG Bandsaw Line with T14 transport system Kaltenbach KBS 750 double mitre horizontal bandsaw with LS270 NC cross-cut fence and T14 transport system in steel trade version - operation and programming are carried out at the control panel. This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsawing machine that is ideally suited for sawing sectional steel such as horizontal double T-beams, L-steel U-steel, flat material and rectangular tubes. KALTENBACH KBS 750 DG band saw Semi-automatic two-column bandsaw for sawing profiles with double miter swivel device. Technical data Cutting capacity: with 90° saw cut 750 mm × 500 mm +70°: 730 × 500 mm -70°: 710 × 500 mm +60°: 670 × 500 mm -60°: 650 × 500 mm +45°: 550 × 500 mm -45°: 520 × 500 mm +40°: 500 × 500 mm +30°: 390 × 500 mm Technical data: Min. profile cross-section: 10 × 10 mm Saw blade dimensions: 6990 × 41 × 1.3 mm, type bimetal M42, Z3/4 Drive power: Saw with frequency control: 5.5 kW Hydraulic unit (4.9 l/min): 1.5 kW Cutting speed: 15-100 m/min, continuously adjustable from the control panel Feed: work feed: 0-300 mm/min Fast forward and return: 2500 mm/min Working height: 640 mm Compressed air connection: 6-8 bar Ijdpfx Aey Rimuocrjth Air consumption: 500 NL/min (according to DIN 1342) Saw weight: approx. 3200 kg Saw dimensions: 3230 × 1160 × 2420 mm Electrical system: Version according to EN 60204-1 Mains connection: 3 phases + N + PE / 50 Hz Power consumption: 17 kVA Fuse protection: 35 A Machine equipment Kaltenbach KBS 750 DG Very robust two-column guide for maximum precision. Inclined saw arm for higher performance and accuracy. Automatic table lowering during material transport Infinitely variable speed control via frequency converter. Hydraulic belt feed, manually adjustable NC-controlled angle adjustment with absolute value encoder Automatic cycle: Clamping - sawing - unclamping Horizontal clamping device: Fixed front stop, opposite clamping block via cylinder. Manually adjustable pressure reduction. Vertical tensioning device: Directly next to the belt; manually adjustable pressure. Backlash-free linear guides. Automatic adjustment of the belt guides Automatic cutting pressure control Remote diagnosis possible (telephone line required by customer) Hydraulic belt tensioning with electronic monitoring Automatic release at standstill Automatic stop in the event of belt breakage Micro-spraying system for clean operation and long service life Integrated chip container Separately driven chip brush Electronic slip monitoring Hydraulic heating