Used Karl Schermer for sale (335)

Condition: used, Year of construction: 1983, sheet width 2540 mm plate thickness 2 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW Kdedpfxew H Dkao Ahhjr dimensions 4 x 1 x 1,5 m With accessories.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm Kjdeyif Nrjpfx Ahhedr oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: excellent (used), DEMAG hub motor for lifting unit DH1000 / DH1200 Type KBH160 B4 In excellent, refurbished condition, original price €15,741.00 Several units in stock Individual parts also available, both new and used Kdjdpfsv Uvdiox Ahhor Significantly below the manufacturer's original price.

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor. Kdodpfsznndkjx Ahher

Condition: good (used), Year of construction: 2013, Atlas Copco compressor used Type: GG-90-VSD Power: 62kW Year of manufacture: 2013 Please only view by telephone arrangement! Preferred sale to dealers, traders or exporters. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course, we also take care of all formalities Kodpfx Ahotu Uhmjhedr Loading possible

Condition: used, Year of construction: 1988, grinding length 0600 mm Kodpou Rt E Tjfx Ahhedr grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: excellent (used), functionality: fully functional, DEMAG traveling hoist, 3.2 tons, complete with PLV168 hoisting unit Kdodowafidspfx Ahhsr in good condition, ready for immediate use DEMAG slip ring motor 36/24 S4 GÜ Fine-pitch gearing FG36 19K or Fine-pitch gearing 72 DFg reconditioned or hoisting motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! DEMAG parts warehouse

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm cutting angle 90 ° throat 110 mm strokes per minute 45 total power requirement 2,5 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1 x 1 x 1,2 m Kdjdpsxyacpjfx Ahhor

Condition: like new (used), functionality: fully functional, mileage: 1 km, power: 170 kW (231.14 HP), fuel type: diesel, empty load weight: 10,500 kg, overall weight: 14,100 kg, tire size: 395, axle configuration: 4x4, wheelbase: 3,850 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, all wheel drive, crane, cruise control, differential lock, hydraulics, navigation system, onboard computer, soot filter, trailer coupling, Kranimog special model KARL - special model! Unimog U5023 with HMF crane with 6 extensions and a winch! - a work platform is also possible! The Unimog has a total height of only ~3.68 m with the large Michelin tires! Key features of the Unimog – more detailed information available upon request: Tire pressure control system Off-road gear reduction Automatic Shift EAS Gearbox auxiliary drive Reinforced cross member for increased trailer load Trailer hitch Air conditioning Driver's air suspension seat Front and rear cameras, monitor Digital tachograph, Generation 2 Exhaust system with upward-pointing tailpipe Kdedpfx Askqfq Ajhher High-performance engine brake HMF crane 1620 with 5 extensions and winch - a work platform is available as an option! ==> Scharmüller trailer hitch with truck coupling and/or car coupling – with truck registration (a specialty and exclusive to us) In combination with the Scharmüller cross member and Scharmüller trailer hitch, the following trailer values are possible: Trailer with continuous braking system: 21,000 kg Trailer with overrun brake: 3,500 kg Trailer without brakes: 750 kg Center-axle trailer: 13,000 kg and vertical load: 1,000 kg  This makes the U5023 a multifunctional towing vehicle, from car trailers to center-axle trailers and classic turntable trailers, in any possible height, with the right coupling!  Ideal for you to operate your crane, as the Unimog itself is short and can therefore tow very long trailers.  Our special model also has a work gear in the gearbox: perfect for maneuvering, as it allows for very gentle clutch operation and, if necessary, the speed can always be adjusted to suit the situation. Offer subject to availability, valid only while supplies last – subject to prior sale. The Unimog is still in use in some cases; mileage may vary!

Condition: used, Year of construction: 1997, sheet width 0610 mm plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar Kjdpfx Aexu Nrpjhhedr strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley Kdedsv Uvftopfx Ahher All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 500 kg, The HAAS Multigrind CB is a universal multifunctional grinding machine designed for grinding gear cutting tools, involute profiles, and spline shaft profiles. Thanks to its large axis travels of 700 x 410 x 500 millimeters, its robust stability, a spindle power of 30 kW, and a high feed rate of 30 meters per minute, it is optimally equipped for custom grinding applications. Technical Data Diameter: 500 mm Axis travels: X 700, Y 410, Z 500 mm Dimensions: 3.0 x 2.65 x 3.65 m Machine weight: approx. 8,500 kg *All information and data is non-binding, subject to prior sale. Key Features: Software: For grinding straight and helical flute hobbing cutters with dressable and non-dressable grinding wheels, grinding involute profiles and spline shaft profiles by importing .dxf files Ksdpex Uwqpsfx Ahhedr Accessories: Various grinding arbors: Ø 27, Ø 32, Ø 40, Ø 50, Ø 60, Ø 80, grinding wheel adapters and Hainbuch collet chucks.

Condition: like new (used), 2 crane travel motors, crane drive, crane bridge with frequency control, almost new SEW crane travel drives, complete with control cabinet Control system with frequency inverter! Frequency-controlled crane travel. Kjdpfjv T Tmrox Ahhjdr The motors come from the dismantling of almost new cranes after the demolition of a hall. The drives have only run for a short time or not at all. Here at a top price!

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge From large DEMAG spare parts stock, see also my other offers Low hours, very good condition, offered due to dismantling of factory hall Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Kedpfx Ahsv T Tf Uohsdr Price: €4,490.00 each, complete For purchase of 8 units: €3,490.00 each net Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well!

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm Ksdpfx Aot Tqlbjhhedr min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: used, Year of construction: 1970, faceplate diameter 2000 mm turning dia. in gap 2400 mm length of gap 200- 630 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 5- 180 U/min centre height over plate 1140 mm diameter of main spindle 285 mm spindle bore 90 mm Control S 840 D max. workpiece weight 5000 kg max. torque on the faceplate 3000 Nm total power requirement 57 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,5 x 3 x 2,8 m Kodpfx Ajydqpcohhedr Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 1,238 kg, empty load weight: 2,652 kg, loading space volume: 29.9 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 2,165 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible when purchasing multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 1 unit in stock, RAL 7043 3 units available in the short term, other RAL colors available on request Other models and sizes available from our Paderborn warehouse. You can view our current stock on our website. Roll-off container according to DIN Technical description: * Internal dimensions: 6000 x 2300 x 2165 mm * Usable volume: 29.9 cbm * Tare weight: 2652 kg * Floor 5 mm S 235 * Side walls 3 mm S 235 * Without internal supports, 1 longitudinal support (belly band) * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Rule 114-010 Kedpfjzu Rhlex Ahhodr * Standard ladder, screwed on, galvanized * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Top frame square tube 100x100x5 mm * Net hooks * All moving parts lubricatable * Steel drain rollers 159 x 6.3 length 300 mm * Zinc phosphate primer inside and outside, painted outside with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V Kdjdjydqpiepfx Ahhjr connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Circular saw Manufacturer: Karl Mrozek Power: 5.5kw Year of manufacture: 1983 Table size (mm): 1180x670 Cutting depth mm max.: 50 - 125 Cutting width (mm): 1250 Kodowtd Hzopfx Ahhjdr

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 1 Plate thickness 400 mm Kedpsv Ey Nqsfx Ahhsdr weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m This plate has 10 t- slots in length direction each 32 mm wide.

Condition: excellent (used), functionality: fully functional, GEARBOX SET Part Number 82452533 DH1000 3-speed, i=112.3 4 units of DEMAG gearbox DH1000 in top condition, like new Original price per unit: €23,135.06 net, now for €16,900.00 net each 4 units of plug-in shaft / splined shaft DH1000H16, Art. No. 82417633, new. Original price per unit: €1,796.76 net, now for €1,290.00 net each. Kdjdsv T Ti Tepfx Ahher Thousands of DEMAG spare parts in stock. Free shipping within Germany! Info! Over 30,000 DEMAG spare parts and components in stock! Demag crane parts warehouse.

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW Ksdpfx Ahozhxi Djhsdr total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads. Kdsdpfxox Tbf Ue Ahhor

Condition: used, Year of construction: 1982, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement. Kdedpfx Aeu Rt Dijhher

Condition: used, Year of construction: 1985, length 3000 mm width 2500 mm number 10 Plate thickness 350 mm Kodpfxex Avqhs Ahhedr weight of the machine ca. 5,14 t dimensions of the machine ca. 3 x 2,5 x 0,35 m 10 pieces T- slotted floor plates with 32 mm slots.