Used Kempi Minarc 150 for sale (17,975)

Condition: good (used), Vötsch VTU 100/150 heating and drying cabinet Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature: 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Nominal current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weight: 780 kg Microprocessor-controlled temperature and program controller Jumo two-point controller Digital display of setpoint/actual temperature, plain text display Easy loading of the device floor via folding ramp Dimensions Interior: (W x H x D) 1000 x 1500 x 1000 mm Kjdpfx Aasxbgt Denofa External: (W x H x D) 1840 x 2389 x 1450 mm You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), - Table surface: 457 x 152 mm - Maximum distance between grinding wheel and table surface: 400 mm - Grinding spindle power: 2.2 kW - Grinding wheel dimensions: 200 x 25 mm diameter - Grinding wheel rotation speed: 1000-4000 rpm Kjdpfx Aaowlhtvsnsfa - Table travel speed: 1-25 m/min - Minimum programmable increment: 0.001 mm - Dimensions: 1800 x 1200 x 1950 mm

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Kfsdpfstva Sgex Aanea Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Kfsdpfxevr Eics Aanja Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: excellent (used), Very good condition + lots of accessories Kedpfx Aew R E Tceanjfa

Condition: good (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,000 kN, column diameter: 55 mm, Two-component injection molding machine Kfedpfx Ajw A Nz Noanoa Year of manufacture 2003 Operating hours 52,800 Clamping force 200 tons Screw diameter 55 mm – horizontal injection unit Screw diameter 35 mm – vertical injection unit Equipment: 2 core pulls, Euromap 12

Condition: ready for operation (used), Easitemp 6/150 temperature control device Year of manufacture: 2009 Empty weight: 37 kg Particularly compact temperature control device with a heating output of 6 kW for continuous use up to 150 °C Excellent cooling output of 45 kW at 80 °C flow temperature and 15 °C cooling water temperature Description has been adopted You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! Kedpfsvx Rfiex Aansfa You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/150 Technical specifications Pressure 150 t stroke 300 mm table area 1070 x 290 mm column passage between guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 11 kW Kfsdpjgiphnsfx Aansa Machine weight approx. 1900 kg. Space requirement approx. 2110 x 1000 x 2340 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Pressure gauge

Year of construction: 1989, condition: used, material width 150 mm material thickness 3 mm Kfsdslp U Rnopfx Aanja no. of straightening rolls 7

Condition: good (used), Vötsch VTU 100/150 Drying oven Heating cabinet up to 250°C Kfedpfew Hbhvsx Aanoa

Condition: new, Promess KA-EMF20/150 Servo press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo press KN: 20 Item condition: New Calibrated: Yes Kfjdpfx Aasrgn N Ssnsa Strain gauge amplifier: BA 62601 More servo presses new and used - can be found in our store! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR Kodpep Audqefx Aanjfa INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: new, Hydraulic workshop press LFSS Typ. DPM-K 1570/150 hydraulic workshop press with adjustable cylinder Technical specifications pressure 150 t stroke 300 mm Kfedpfx Asgx Uvaeansa table surface 1570 x 260 mm column passage between guides 1570 mm infeed speed 9,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 11 kW Machine weight approx. 2100 kg. Space requirement approx. 2630 x 1000 x 2480 mm Equipment: hydraulic workshop press with adjustable cylinder table height adjustment V-block tool insert pressure gauge

Year of construction: 2016, condition: new, cutting capacity - round Ø 150 mm Ø 75 mm 150x125 mm 70x50 mm 125 mm Kjdslp U T Hjpfx Aanjfa 50 mm speeds steplessly adjustable 25-138 m/min total power requirement 1,8 kW weight of the machine ca. 35 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150-2 2000 (Foundry Option is also available) Condition: USED Year: 2006 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper & The base are not included) - FULL SET Kfedeq A Uq Uspfx Aanja Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Year of construction: 2010, condition: ready for operation (used), General Data Machine weight 6500 kg Control Unit Brand FANUC Model 21i-TA Main Drive Number of spindles 2 Spindle speed range 4000 Number of axis 4 Movement Kfjdpfx Aajx Iximsnja X-Axis Movement 160 mm Z-Axis Movement 180 mm Turret Number of turrets 2 Tools Number of index 12 This 4-axis Takamaz XW-150 was manufactured in 2010, a robust horizontal turning machine ideal for precision tasks. If you are looking to get high-quality turning capabilities, consider the Takamaz XW-150 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2016, Voltage 400 V Power 8.45 kVA Weight 195 kg Kedpfx Aaox I Aaisnsfa

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Kedpfsxwl Tzsx Aanefa Machine Status: NOT WORKING: NC does not start

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Kfjdpsx Emdgjfx Aanja Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: good (used), Sumbel Enano 150 gluing machine The machine is fully operational ready for production. Like a new one. Ksdpfxou Umaps Aansfa It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. A set of separators, Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, load capacity: 150 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2, Model: KR150 L130 Condition: Used Year: 2002 (Multiple options available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Not Included: Shipment, Customs and VAT is not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. Kfjdpfow Napvsx Aanoa

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Kedpfex D Suljx Aansfa Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Rolling

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm Kedpexwlmuefx Aanjfa - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 3,300 mm, Model: KR150 Kedpfxohakfaj Aanofa Condition: USED Year: 2003 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales Kedjxwl N Aspfx Aanjfa - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor