Used Key Cutting Machine for sale (70,847)

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hjdpfx Aoza Ukijirsw

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total width: 1,650 mm, total length: 5,450 mm, total height: 1,900 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,475 kg, type of input current: three-phase, CAPACITY: 250 pieces/minute max. BAG WIDTH: 80 mm – 800 mm max. BAG LENGTH: 70 mm - 1000 mm FILM THICKNESS: 0.020 mm – 0.100 mm TOTAL ELECTRIC POWER: 13 kW (380 V – 50 Hz) SERVO MOTOR: 4 UNIT PHOTO CELL: 1 UNIT TOTAL AIR SUPPLY: 6 Bar min. MACHINE WIDTH: 1650 mm Hsdpfx Aiezd N Ipjrsw MACHINE LENGTH: 5450 mm MACHINE HEIGHT: 1900 mm WEIGHT: 1475 kg STANDARD FEATURES - Controlled via a touch operator panel: bag length, number of pieces per bag, production speed, visible number of bags in the package, stop function based on the total count. - Equipped with one photocell. Handles both printed and unprinted bags. - High-speed cutting with precise measurement, achieved through servo motor-controlled pulling rollers. - Strong and high-quality sealing is achieved through a servo motor-controlled sealing jaw. - The servo motor-controlled belt system ensures synchronous operation of the belts with the stacking system. - Servo motor-controlled stacking rollers provide high-quality stacking. - Warp rolls with inverter tension control system. - Pneumatic ballerina system. - Automatic edge control system. - Automatic stop when the roll is empty. - Automatic stop when the photocell print location is incorrect. - Roll bobbin binding diameter: max. 800 mm. - Capable of processing PP, OPP, CPP, High Density Polyethylene (HDPE), and Low Density Polyethylene (LDPE) bags.

Condition: excellent (used), CATALOGUE NUMBER 7393 TECHNICAL DATA Crosscut saw: max. saw blade diameter 350mm spindle 30mm blade adjustable left/right, up/down motor 1.5kW Router: dovetail spindle: spindle diameter 40mm spindle working height 145mm max. router bit diameter 400mm motor 3.7kW side carriage adjustable up/down clamping device on the carriage tabletop + fence with angle adjustment 600x400mm dimensions L/W/H 1700x2050x1260mm weight approximately 500kg Hjdpfx Ais Af Izcjrjw ADVANTAGES – made in Germany – very good condition – used router Net price: 7900 PLN Net price: 1840 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2014, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 1000001927, travel distance X-axis: 3,210 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, pressure: 3,800 bar, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, INTERMAC PRIMUS 322 METAL – 5-AXIS WATERJET – YEAR 2014 Approximately 2,200 operating hours | Working area 3,210 × 2,000 mm | BFT Ecotron 38.22 pump | 3,800 bar B&B Waterjet Abrasive offers for sale a used Intermac Primus 322 Metal 5-axis waterjet cutting system, year 2014, complete with a 22 kW BFT Ecotron 38.22 high-pressure pump. The machine is in excellent condition and was disassembled while in working order. It is currently disassembled at our Onara di Tombolo (PD) location, where it can be viewed by appointment. A functional test is not available in its current state. The 5-axis configuration allows for machining with an inclined head, offering greater versatility compared to vertical cutting alone. TECHNICAL DATA • Manufacturer: Intermac / Biesse • Model: Primus 322 Metal – Waterjet • Year of manufacture: 2014 • Configuration: 5 axes, X / Y / Z / A / C • Machine operating hours: approximately 2,200 • Working area X/Y: 3,210 × 2,000 mm • Z-axis travel: 200 mm • A-axis tilt: ±60° Hjdpfx Aio Aduy Isrow • C-axis: continuous rotation • Maximum axis speeds X/Y/Z: 45 / 45 / 15 m/min (not cutting speed) • Allowable load on the table: 1,000 kg/m² HIGH-PRESSURE PUMP • BFT Ecotron 38.22 • Pump motor power: 22 kW • Maximum pressure: 3,800 bar • Maximum flow rate: 2.3 l/min • Pump power supply: three-phase, 400 V, 50 Hz APPLICATIONS Abrasive waterjet cutting of metals, including steel, stainless steel, aluminum, copper, brass, and titanium, as well as stone, ceramics, and non-tempered glass. Thicknesses, speeds, and achievable quality depend on the material and processing parameters. REQUESTED PRICE: €50,000 + VAT The price includes the machine and the BFT Ecotron 38.22 pump. Transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately depending on the destination and the customer's requirements. B&B WATERJET ABRASIVE: YOUR WATERJET PARTNER With over 17 years of experience in the industry, we support the customer from the selection of the system to its daily management. We can assist with installation and commissioning, operator training, technical assistance, and maintenance, as well as the supply of spare parts and abrasives. A single point of contact to guide you through the purchase and support you over time. To receive more information, arrange a visit, or request a quote including the necessary services, please contact us, indicating the installation location and your production requirements. B&B Waterjet Abrasive

Condition: used, Year of construction: 1998, functionality: not functional, machine/vehicle number: 241, travel distance X-axis: 4,000 mm, Tekna TK 145/20 CNC twin head mitre saw. Cutting lenght: 4000mm Hodpfx Aoxrg Suoirsw Blade 500mm

Condition: used, Year of construction: 2016, controller model: , _____ Description: Year of manuf. : 2016 Base axis (X) : mm Outrigger (Y) : mm Hodpfx Aez S S Efeirjw Technical Specifications Working area X/Y:4,000 × 2,000 mm Material support area X/Y:approx. 4,100 × 2,100 mm Z-axis travel:approx. 150 mm Max. traverse speed:12,700 mm/min Max. contour cutting speed:7,620 mm/min X/Y positioning accuracy:± 0.04 mm/m X/Y repeatability:± 0.05 mm High-Pressure Pump Manufacturer / Model:Flow HyPlex Prime 30 Motor power:22 kW (30 HP) Max. design pressure:4,150 bar Continuous operating pressure:3,800 bar Max. flow rate:3.1 l/min Power supply:400 V / 50 Hz / 3-phase Standard Equipment :-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement :-PASER 4 abrasive cutting system :-Abrasive storage hopper, capacity approx. 285 kg :-Premium stainless steel catcher tank with water level control :-CleanCut material support system :-Flow Shields splash protection :-Safety light curtain :-FlowMaster PC control system Additional Equipment :-Flow UltraPierce piercing assistance system :-DynaBeam laser height sensor :-LaserPointer :-Pure water conversion kit

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Hjdjw A Iilopfx Airjw Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 800 mm, stack height: 100 mm, overall weight: 900 kg, type of input current: three-phase, front table length: 1,500 mm, total width: 1,500 mm, input current: 380 A, total length: 1,950 mm, input voltage: 4 V, Equipment: safety light barrier, Robust, programmable guillotine that can be integrated into a workflow, with hydraulic drive and an 18.5” touchscreen display. A barcode reader can be added for automatic job selection. Hsdpjyrqnhsfx Airsw Extensive programming options, with a memory capacity of 1998 programs. The machine frame has enhanced stability and is optimized for high cutting force absorption and maximum cutting precision. The Mohr 80 guillotine is designed for single-shift operation. Precise cutting is achieved hydraulically. This allows the time the blade spends at the bottom dead center to be adjusted to the type of material. The ultra-smooth stainless steel table, equipped with air jets, allows for easy material handling. The press force can be adjusted over a wide range of pressures, adapted to each material via a scaled button. Bright LEDs clearly mark the cutting line for the operator. The machine is operated via an ergonomically positioned control panel with a 18.5" touchscreen display. It can be integrated into a workflow. Cutting data is taken directly from prepress via Compucut® (optional, costing 5,500 euros). Recurring cutting sequences can be memorized (memory capacity of 1998 programs) and adjusted at any time. Technical data PLUS 80: Maximum cutting width 800 mm Maximum feed depth 800 mm Maximum feed height 100 mm Minimum pressure 180 daN Maximum pressure 2,700 daN Ram speed during return (0 - ...) 130 mm/sec Smallest automatic cut without a false plate 15 mm Smallest automatic cut with a false plate 50 mm Dimensions MOHR 80 PLUS (w × d × h) 1,500 × 1,970 × 1,500 mm Total weight 900 kg Electrical power supply (apparent power) 4.0 kVA Includes 2 HHS blades. Includes left and right tables. Includes light curtain. Includes 1 additional carbide blade. Includes 1 additional PREMIUM carbide blade. Compucut® with P-Net Connect (original optional purchase cost was €5,050.00)

Condition: used, Year of construction: 2008, Technical details: x-travel: 3002 mm y-travel: 2002 mm z-travel: 200 mm total power requirement: 9 kW cutting speed: 40 m/min high-pressure pump: max. 4.000 bar weight: ca. 5.800 kg dimensions: 3800 x 2900 x 2200 mm mm waterjet cutter, for cutting of miscellaneous materials, like f.e. Aluminium, Stainless steel, plastic ... accuracy: repeat accuracy (new machine) +/- 0.1 mm Hjdpfo Adr Ayox Airew accessories: Sand (several pallets) *

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 236 C 272, Laser cutting machine Hsdez Nqh Hjpfx Airsw Prima Power Domino, Serial No. 236 C 272, year of manufacture 2012 with - Laser source CX3000, Serial No. 110015, year of manufacture 2011 - Control system Prima Electronics P20L-OI - Industrial cooling unit Hyfra SVK320-1-S, Serial No. 11040530, year of manufacture 2011 - Absorption dryer Further information can be found under "Visit the auction".

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Hsdpfovmwn Hsx Airjw Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Hodpfx Aijzzyl Hjrew Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Hsdpfxsv D T H Tj Airjw Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: good (used), Perfecta 168 TS paper guillotine The machine is in very good condition and ready for production. Year of manufacture: 2010. Available immediately from stock. The guillotine can be used as a standalone unit or integrated into cutting systems. Program creation is handled via the menu and covers a wide range of cutting tasks, such as single cuts, custom programming, multiple cuts, clamping without cutting, and automatic transfer of actual values. Perfecta premium-class paper cutters are manufactured in Bautzen, Germany. Distinguishing features of Perfecta machines: – Interactive user interface – 18.4” touchscreen – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via an electronic handwheel – Optimized cutting cycle – Programmable clamp pressure – Automatic adjustment of clamp pressure based on cutting width – Automated front-access knife change – Quick-change knife system – New, single-piece cast machine frame for increased stability – Maintenance-free electromagnetic clutch Technical specifications: Hodpfx Aiez S Uy Eersw Cutting length: 1680 mm Maximum pile height: 165 mm Insertion depth: 1680 mm Minimum cut with false clamp plate: 77 mm Minimum cut without false clamp plate: 26 mm Maximum backgauge speed: 300 mm/s Backgauge guidance: above the work table Main motor power: 7.5 kW Net weight: 6900 kg The machine comes equipped with a spare knife, a paper jogger, a false clamp plate, documentation, and a set of tools.

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Hsdpfxexwl Tzo Airew Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: used, ATM Type: ATM Brillant 255 ATM Brillant 255 Cut-off Grinding Machine 400V Metallography Laboratory 2019 Description: A professional cut-off grinding machine, ATM Brillant 255, is for sale. Year of manufacture: [Year of manufacture] Industrial equipment for precise material separation in the field of metallography, laboratory, and material testing. Machine with base cabinet and integrated coolant system. Several matching cut-off wheels are available (see pictures). Very robust, professional quality. Technical data (according to the nameplate): Type: Brillant 255 Year of manufacture: [Year of manufacture] Manufacturer: ATM GmbH Electrical data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse rating: 32 A Mechanical data: Cut-off wheel: Ø 400 mm Hedpfx Aijzizp Asrew Max. wheel speed: approx. 3050 rpm Wheel arbor: 32 mm Machine stands on a base cabinet with a coolant tank. Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Polar Mohr 92 XT Paper Guillotine Hedpfxjz S Uylj Airew The machine is in very good condition, fully serviced, and ready for production. Polar Mohr is the most highly regarded brand of paper guillotines; this model is their flagship product. Technical specifications: Cutting width: 920 mm Stack height: 130 mm Programmable controller with a 15″ color touchscreen display Air table Safety light curtains (photocells) Chrome-plated table surface Ball-screw drive for the backgauge Optical cutting line Extended side tables Knife change system operated from the control panel Weight: 2000 kg Power supply: 380V Includes documentation, a tool kit, a jogger block, a spare knife, and one knife installed in the machine.

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 Hjdpsy Au Hqjfx Airsw • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20221015FX-350ZM, total length: 1,480 mm, total width: 980 mm, total height: 800 mm, overall weight: 500 kg, input voltage: 400 V, type of input current: three-phase, tank capacity: 350 l, We offer a meat cubing machine with a capacity of 300–500 kg/h. The machine is new and has only been used for testing, approximately 1 hour. Hedpfx Aiozd Sgzorjw Cutting range: cube size: from 5 mm to 30 mm also capable of cutting frozen vegetables currently installed blades: 5 mm The machine is in perfect working order and ready for immediate use. Ideal for meat processing plants, catering services, and frozen vegetable production.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Hodpfxey Nl U Sj Airow

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Hjdoy Avg Ejpfx Airsw Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: used, Year of construction: 1998, Wire-cut EDM machine Manufacturer: FANUC Model: ROBOCUT ALPHA-0C Year of manufacture: 1998 Control system: FANUC Series 16-W Technical details: Control system: FANUC Series 16-W X-axis: 320 mm Y-axis: 220 mm Z-axis: 180 mm U-axis: 120 mm V-axis: 120 mm Rapid traverse (X): 900 mm/min Rapid traverse (Y): 900 mm/min Rapid traverse (Z): 450 mm/min Rapid traverse (U): 450 mm/min Rapid traverse (V): 450 mm/min Max. workpiece weight: 250 kg Machine weight: approx. 1.5 t Connected load: 11 kVA Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery Hodpfx Aiszrh N Uerjw only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2013, LVD Orion 3015 Plus laser cutting system, Hedpjwcft Uofx Airjw Year of manufacture 2013, LVD control system, X/Y/Z travel 3080/1555/240 mm, Sheet metal size 3000 x 1500 mm, Max. sheet metal weight 750 kg, Laser power 2.5 kW, CO2 laser, Max. cutting capacity steel/stainless steel/aluminum 16/10/6 mm,

Condition: reconditioned (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, warranty duration: 6 months, CARETTA MODULA 4020 – 3-AXIS WATERJET – 4,000 × 2,000 MM – REFURBISHED WITH WARRANTY Available without pump or complete with a KMT Streamline SL-V 50 Classic 50 HP pump. The first year of CAD-CAM IGEMS subscription is included in both configurations. B&B Waterjet Abrasive offers a Caretta Technology Modula 4020 3-axis waterjet cutting machine, with a working area of 4,000 × 2,000 mm, self-aligning gantry, and ECS CNC 1802 numerical control. The machine is supplied with refurbished or new components, a new Dialine cutting head with integrated diamond, and a new abrasive metering unit. CONFIGURATIONS AND PRICES • €40,000 + VAT: machine without high-pressure pump, with the first year of IGEMS subscription included. • €65,000 + VAT: machine complete with a KMT Streamline SL-V 50 Classic pump, with the first year of IGEMS subscription included. From the second year onwards, the IGEMS subscription costs €1,500 + VAT per year. For both configurations, transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately. TECHNICAL SPECIFICATIONS • Manufacturer: Caretta Technology • Model: Modula 4020 • Technology: abrasive waterjet cutting • Configuration: 3 axes with self-aligning gantry • Working area: 4,000 × 2,000 mm • Controlled Z-axis, 200 mm stroke • Numerical control: ECS CNC 1802 • Cutting head: new Dialine with integrated diamond • Abrasive metering unit: new • Abrasive tank: 200 liters • Motors and drives: Yaskawa • Guides and slides: INA • Rack: Güdel with helical teeth • CAD-CAM software: IGEMS, first year of subscription included SLUDGE SYSTEM INCLUDED IN BOTH CONFIGURATIONS Provision for a sludge disposal system, with a tank, semi-automatic electrical panel, and diaphragm pump included in the supply. PUMP FOR THE €65,000 + VAT CONFIGURATION • Brand: KMT • Model: Streamline SL-V 50 Classic • Power: 50 HP / 37 kW • Maximum pressure: 3,800 bar • Flow rate at 3,800 bar: 3.7 l/min • Topwork refurbished to new condition • Oil and filters replaced The indicated power refers to the pump, not to the total power consumption of the system. WARRANTY, DELIVERY, AND LOCATION Both configurations include: • 6-month / 1,000-hour warranty, according to the offer conditions. • Delivery expected within 8 weeks from receipt of order. Machine can be viewed by appointment at: Via Campolongo, 81E – 35019 Onara di Tombolo (PD), Italy. B&B WATERJET ABRASIVE – OVER 17 YEARS OF EXPERIENCE Hedpfxs Ad I U Es Airjw We support you from the selection of the machine to after-sales service: installation, commissioning, operator training, maintenance, spare parts, and abrasive supply. Services are quoted based on the requirements and the machine's destination. Contact us specifying the desired configuration, the materials to be processed, and the installation location: we will prepare a customized offer.

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Hsdpfx Aij Af E Hhorsw Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.