Used Kgs E 1670 S Signal for sale (1,15,300)

Condition: ready for operation (used), Year of construction: 2020, A Labelling Machine E-Packaging S.r.l. for bottling lines, including a printing system, is available. Max. Speed: 20m/min, label length: 500mm, label width: 10-140mm, product height: 30-150mm. The machine was stored and not used, has therefore not been serviced, no known defects, documentation available. An on-site inspection is possible. Cjdpfx Apjuxdhnjterg

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Credpfx Ajwqqv Doptsg

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Crsdpfx Apswfg E Doteg

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Cjdpfxjffc Tyo Aptjrg Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: ready for operation (used), Agie Zch. Signal Terminal Blok STB-06 A 621802.8, used, minor signs of wear, 100% functional. Crsdpoi D Ty Ssfx Aptsg

Condition: used, Year of construction: 2007, machine/vehicle number: NBGMAN 1, Demag KBK1 / 2 / ALU crane canopy Crane runway with steel structure Dimensions approx. 10m x 4.6m incl. 2 bridges each 125KG payload / lifting capacity Csdpfxsr Igrus Apterg Crane runways can be operated independently of each other. Technical data of the system: Crane runway / steel structure made of HEA 140 girders Dimensions as follows: External dimensions - space requirement approx. 10 x 4.6m with overhead crane payload 2x 125KG with 2x Demag DC chain hoist Approx. dimensions: Top steel structure 5.25m Lower steel structure 4.97m Bottom running rail 4.66 / 4.78m (per crane) Bottom bridge 4.31/4.50m Hook height 3.9/4.1m Crane girder length 4 + 6.7m Internal dimension of supports 4.4m Base plate of the prop 40x40cm Prop HEA140 Running rails HEA140 Prop spacing 4.55 + 5.1mm System is supplied complete as supplied: complete steel construction + 2x crane incl. 2x Demag DC chain hoist 125KG Used condition Crane is disassembled and immediately available Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame Cedpfx Asicnicjpterg inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: excellent (used), The PFAFF 122-6B S is a high-quality German sewing machine designed for working with heavier materials. It is equipped with a triple feed system (walking foot), which ensures even material advancement during sewing. Crjdpszgm Sdsfx Aptjg This machine is ideal for sewing: leather, furniture upholstery, technical fabrics, tarpaulins, straps, covers. Technical specifications: Manufacturer: PFAFF Model: 122-6B S Triple feed system Foot pedal control Work table included Bobbin stand Belt drive Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold exactly as depicted in the photographs.

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Crsdpfx Apsyubcnstsg Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: excellent (used), Professional industrial hydraulic press from the renowned German manufacturer MÜLLER – Fritz Müller Pressenfabrik Esslingen. Robust and heavy-duty construction designed for pressing, stamping, punching, and forming metal and technical components. The machine is in good visual and technical condition. Equipped with manual controls, stroke counter, and pressure gauge. This industrial-grade design is ideal for manufacturing plants, tool shops, workshops, and production lines. Technical specifications: Manufacturer: MÜLLER Model: S 16.1.20 Year of manufacture: 1977 Cjdpoy St R Tofx Apterg Machine number: 9183 Machine type: hydraulic press Two-hand control Stroke counter Pressure gauge Overrun path: 5 mm Overrun time: 35 ms Safety distance: 55 mm Robust steel frame Three-phase power supply Applications: - Pressing of metal components - Stamping - Punching - Forming parts - Production and workshop operations - Sheet metal and technical parts processing Delivery on pallet or loading via forklift possible.

Condition: good (used), Code: 0432 Brand: TOMMASI E BONETTI - ITALY Model: T O6 SA - CE Standard Column grinder with dust extractor for metalworking, workshops, laboratories, joinery workshops, structural steelworks, etc. - CE standard Three-phase motor Hp 1,5 2800 rpm Grinding wheel dimensions: 200 x 25 x 20 mm Extraction motor 0,5 Hp Overall dimensions mm 560 x 680 x 1000 h Weight kg 25 Crjdszipx Eepfx Aptjg

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container – Swivel arm extension 800 mm – Swivel arm height increase 300 mm – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement Csdpfx Apozq S Ifotsrg

Condition: used, Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm Crjdpocncrijfx Aptog -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 490/325/H270 mm -Weight: 71 kg

Condition: used, Three-phase motor, electric motor -Power: 4 kW Crodpfx Apodwlqdstjg -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 395/300/H225 mm -Weight: 41 kg

Condition: used, Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 445/340/H260 mm -Weight: 55 kg Cjdjcqudkjpfx Aptjrg

Condition: good (used), Motor protection switch, star-delta switch Cedsb A Scwepfx Aptorg -Type: MYehb -Price: per piece -Number: 18 available -Weight: 2 kg

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement Csdpfx Apoldk Ikoterg -Manufacturer: EH Endress + Hauser, conductivity transmitter -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: e-guip, KVM Switch EMI Model CBEDE8CE73 -Type: SW0407C -Dimensions: 70/50/H100 mm -Weight: 0.4 kg Crodpfx Apsyam Dhotog

Condition: used, overall weight: 2,100 kg, axle configuration: 2 axles, first registration: 10/2021, total width: 2,150 mm, total height: 2,330 mm, Equipment: crane, Very well-maintained trailer-mounted aerial work platform with a working height of 16 m, a basket load capacity of 200 kg, and a lateral reach of 9.45 m, as well as power supply to the basket, including a generator. UVV inspection was carried out by Paus in March 2026. GT 16 AG aerial work platform Working height: 16 m Telescopic version Lateral reach: 9.45 m Basket load capacity: 200 kg Power supply to the basket: 220 V Includes generator Start/stop for the generator from the basket Fully hydraulic outriggers Outrigger width: 4.08 m Codsznr Rbspfx Apterg Outrigger length: 4.29 m Endless rotation Overall length: 6.31 m Transport width: 2.15 m Transport height: 2.33 m Weight: 2,100 kg Financing options are available through our partner banks; we will be happy to assist you. We explicitly reserve the right to sell the item in the interim, as we also offer it on other platforms. Information on accessories is provided without guarantee. Subject to change, interim sale, or errors. We strongly recommend and encourage an inspection and evaluation to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and evaluations can be arranged at any time and are expressly desired.

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Codpfsxl Rf Sox Aptsrg

Condition: excellent (used), Professional industrial robot from the renowned manufacturer SHINI, designed for automation of production processes – mainly for removing parts from injection molds and handling components. The device is used in the plastics processing industry (injection molding machines), ensuring fast and repeatable work cycles, increasing production efficiency. The robot is equipped with a handheld controller (teach pendant), allowing for programming of movements as well as automatic mode. Technical data: • Manufacturer: SHINI Plastics Technologies • Model: S-530-V-2KM7-CE • Year of manufacture: 2017 • Power supply: 230V (single phase) • Frequency: 50 Hz • Power: 30 W • Payload / Application: robot for light-duty applications (parts removal from molds) • Arm reach: approx. 550 mm • Pneumatic gripper (operating pressure: 2–10 bar) • Manual control + AUTO mode • Complete wiring Cedpfxjy Duzqo Aptorg • Weight: approx. 62 kg Equipment included: • SHINI robot • Handheld controller (teach pendant) • Pneumatic gripper • Cables and installation • Documentation (visible in photos) Condition: Used – normal signs of use. Technically sound and ready for operation. Additional information: • Sold exactly as shown in the photos • Inspection before purchase possible • Pallet shipping available Applications: • Injection molding machines • Production automation • Part removal • Pick & place operations

Condition: new, I am offering an industrial gearbox/valve actuator by DREHMO, model MSG 800-S. The device is intended for use in industrial installations – mainly for the control of valves, gate valves, and butterfly valves. Product – new / stock item, unused. ⚙️ Technical data: Manufacturer: DREHMO Model: MSG 800-S Type: gearbox / valve actuator Application: industrial fittings (valves, gate valves, butterfly valves) Design: heavy-duty, industrial Condition: new (stock item) 🔧 Applications: water and sewage installations power industry chemical industry industrial and technological installations 📦 Included: DREHMO MSG 800-S gearbox exactly what is shown in the photos 🚚 Shipping: possible dispatch by courier or on a pallet Crjdpoyz Ia Usfx Aptog personal collection available

Condition: new, ///// PRICE PER UNIT ///// For sale: professional submersible pump KSB AmaDrainer B 80-40 S – high-quality device designed for operation in demanding conditions (dirty water, sewage, drainage). ✔️ Condition: NEW ✔️ The pump has never been used ✔️ Original packaging / wrapping / documentation Cedpfxey Abr Ho Aptorg ✔️ The set includes cable + float switch + controller ⚙️ Technical data: Manufacturer: KSB (Germany) Model: AmaDrainer B 80-40 S Power: 4.0 kW Supply: 400V / 3~ / 50 Hz Current: 8.5 A Protection class: IP68 Capacity: up to 100 m³/h Rotation speed: 2800 rpm Insulation class: B Max. liquid temperature: 40°C Weight: approx. 65 kg ✅ Applications: construction dewatering pumping stations sewage and dirty water industry wells and tanks 📦 Set includes: ✔️ KSB pump ✔️ Power cable ✔️ Float switch ✔️ Documentation ✔️ Original packaging

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Cedsyyqnfjpfx Aptsrg Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: new, R.& S. Keller control panel cover, Dialog 11, unused, 100% functional. Cjdoi Ecmaopfx Aptsrg