Used Kiln for sale (68)

Condition: used, FICOLA furnace for ceramic 5m³ with tiles with wagons(1+1) with forklift truck handling wagons Hodpfxov Upwcs Aabsfn

Year of construction: 1989, condition: used, working area L-W-H 5300x750x630 mm Hfedpfovwghwjx Aabon

Condition: excellent (used), Glasbeek finish   Gas Poederwand chamber oven  Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V Year 2003 Approx. internal dimensions W120cm x D300cm x H139cm with loading trolley (L280 x W102 cm) Approx. external dimensions LxWxH approx. 380x220x305 cm Hedpfxed Szzgj Aabjfn

Condition: used, Smoking Kiln Make: Afos Model: Double Maxi Capacity: upto 127kg per cycle Hsdpfx Aaewp R Nhobofn Hot and cold smoke Separate smoke producer Floor standing, lifts as one piece. Ex Fish factory

Condition: used, FICOLA ceramic kiln 20m³ with tiles with wagons(4+4) with forklift truck handling wagons Hedev Upvlopfx Aabjfn

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Hjdod Srlropfx Aabjfn Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Hfjdsd Spx Djpfx Aabon More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek finish Gas chamber furnace Type G.11.01 With loading trolley Maximum temperature 200 ° C BJ. 1991 3 x 380V Hfjdpjd Spxvefx Aabjn 54 kW Approximate inside dimensions (B1900mm x T2940mm x H1965mm) More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2010, condition: excellent (used), - Production per hour : 4 panels - Daily production on 8 hours shift : 32 -Year production on 250 days: 7040 -Efficiency: 1MWp/year -Required Power: 40kW - Electric Feeding : V 380/3 + N +T 50 Hz Hodouhwmgspfx Aabefn -Water Consumption : 210 litres / our (0 litres with refrigeration) -Air consumption: 7000 liters / hour Final Product A) Standard 36 square cells 103 x 103 mm (4”) Panel with typical dimensions: 990 x 450 mm Power per cell: 1,5 Wp Cells per panel: 36 Year Production per shift : 380.160 Wp Panels per year: 7040 B) Standard 72 square cells 103 x 103 mm (4”) Panel with typical dimensions : 1300 x 660 mm Power per cell : 1,4 Wp Cells per panel : 72 Year Production per shift : 760.320 Wp Panels per year: 7040 C) Standard 36 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1200 x 540 mm Power per cell : 2,5 Wp Cells per panel : 36 Year Production per shift : 633.600 Wp Panels per year : 7040 D) Standard 72 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1600 x 800 mm Power per cell : 2,5 Wp Cells per panel: 72 Year Production per shift : 1.267.200 Wp Panels per year: 7040 E) Standard 36 square cells 156 x 156 mm (6”) Panel with typical dimensions : 1450 x 650 mm Power per cell : 3,5 Wp Cells per panel : 36 Stran 4 od 7 Year Production per shift : 887.040 Wp Panels per year : 7040 F) Standard 72 square cells 156 x 156 mm (6”) Panels with typical dimensions : 1950 x 980 mm Power per cell : 3,5 Wp Cells per panel : 72 Year Production per shift : 1.774.080 Wp

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6381/99, 2 connected kilns, timber volume, each 142m3 , total = 284 m3 concidering: - 50x100 boards, stacking factor 0.85 - each kiln 24 stacks 4.2x1.2x1.2m + 12 stacks 5.1x1.2x1.2m ; 1m free space in front and 1m behind the stacks, 0.15m between the stacks - inside dimensions of each kiln: width 15.2m (3 stacks), depth 7.3m (4 stacks), height 4.1m (3 stacks) - dimensions of loading door 15.2x4.1m , lifting-sliding type of 2 pcs. Inspection doors in rear walls. Hfjdpfewynnijx Aabsn - loading system frontal forklift , 2 sliding trolleys for the loading door of lifting-sliding type Heating power 610,000 Kcal/h at 60'C inside temperature. Heating system: hot water, 90'C at inlet min, bi-metal pipes, stainless steel core with external aluminium fin, including the automatic valve for the hot water with intercept valves and stainless steel pipes till rear wall of dryers Rehumidification: cold water 3.5 bar, 150l/h. The spraying device by stainless steel pipe and changeable nozzles on brass. Number of fans each kiln, installed in long aluminium pipes (Nardi patent): 12 , reversible, 800mm, changed power motors 4.0/1.1kw, two speeds. Long pipes increase the air flow, reducing the pressure drop, saving energy. The horizontal aluminium baffles closing the free space over the stacks Number of vents each kiln: 8+8 cast aluminium vents Snow load 120 kg/m2, wind speed 100 km/h The electric switchboard cabinet per each kiln. Voltage: 400V , 50Hz . Type of control: LEONARDO 3000 (renewed in 2007) Each kiln has 12 wood moisture probes, 2 kiln temperature probes and 2 kiln relative moisture probes, 3 digital read outs of these values. Dismantling will be done by buyer. Seller provide a forklift if needed.

Condition: used, Kilns 6 pcs. Hedpsw I Dgisfx Aabefn Manufacturer: Balt Brand Year of production: 2014 Capacity: 60 m3 per chamber Total capacity: 360 m3

Condition: used, Kilns QUANTITY: 4 Manufacturer: HB KRAKOW Model: HB90SW Year of production: 2012 Hjdpow Ipcpofx Aabjfn Length: 9.4m Width: 5.6m Height: 5.5m Drying room capacity, m3: 90 (drying wood) Heat capacity of heaters: 500 kW

Year of construction: 2025, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: Hjdsq Nfbhspfx Aabjfn - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process.

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits Hfedpfx Aexnbctsabon - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills - Pallet manufacturers - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Year of construction: 2005, condition: like new (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Applications: - Crushing of flakes Hsdpfx Aofkgxmjabjfn - After mixer agglomeration - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Hjdpfx Aewp Rqfeabjfn Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), I am selling wood drying kilns in very good condition. Hfsdsxf Nybopfx Aaben

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: ECO, total width: 1,000 mm, total length: 2,000 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, inner dimension height: 450 mm, Type: ECO Manufacturer: RCN ENGINEERING Hodpfx Aajwtpf Ajbofn Year of production: 1999 Internal kiln dimensions: 2000 x 1000 x 450 mm NOTE: Glass fusion molds are included with the kiln.

Year of construction: 2023, condition: as good as new (ex-display), 2 units new in stock, new machine warranty, in-stock item, available for immediate delivery Hfsdpfx Ajl Dw T Asabon Equipped with a safety system for solvent-based substances in accordance with DIN 1539. Matching loading carts available in stock (see photo). Contact us for details! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h - Additional equipment: drive-in rails - Connected load: 39 kW - Net weight: 1,150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Viewing by appointment in our warehouse. We offer new and used industrial furnaces. Contact us! Furnace, ovens, drying oven, kiln, heating oven, warming cabinet, industrial furnace, annealing oven, preheating oven, tempering oven, drying cabinet, chamber kiln, curing oven, forced convection drying cabinet, forced convection oven, solvent oven, chamber dryer

Year of construction: 2015, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hfedpfef H Akbsx Aabon The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task. Additionally the gap between the rotor and the sieve can be adjusted. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Applications: - Crushing of flakes - After mixer agglomeration - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates Motor: 4kW

Year of construction: 2001, condition: refurbished (used), functionality: fully functional, with safety system for solvent-based substances according to DIN 1539, including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall in the interior Completely overhauled, 12 months warranty -Internal dimensions (WxDxH): 1000 x 1000 x 1500 mm -External dimensions (WxDxH): 1900 x 1430 x 2315 mm -Volume: 1500 liters -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs, each with 16 segments) -Eurotherm data recorder Hsdpfx Ajvcb U Aoabofn -Connected load: 29 kW -6 mesh shelves included, as well as V2A support brackets -Minimum exhaust air volume flow: 360 m³/h -Maximum permissible solvent quantity: 36 g at nominal temperature of 300°C -with concentration measurement -Window seals renewed -Approximate net weight: 1200 kg -Including documentation, CE Declaration of Conformity Viewing possible by appointment in our warehouse. We supply new and used industrial furnaces. Contact us! Oven, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating air drying cabinet, recirculating air oven, solvent oven

Year of construction: 2025, condition: as good as new (ex-display), 12-month warranty, in-stock, brand-new unit. Electrically heated circulating air chamber furnace including base frame. Nabertherm NA 120/85 - Tmax 850°C - Furnace chamber: 450 x 600 x 450 mm (W x D x H) - Volume: 120 litres - External dimensions: 990 x 1470 x 1550 mm (W x D x H) - Loading height: 900 mm - Temperature uniformity ± 5°C according to DIN 17052-1 in the empty usable chamber - Permissible batch weight: 120 kg with evenly distributed load - Controller: C 540 (10 programs with 20 segments each) - Maximum batch weight per shelf rail: 60 kg - Shelf rails included: 2 pieces (no shelves!) - Maximum number of charging levels: 3 levels with approx. 70 cm spacing Hfsdpfxjxgttno Aabon - Connected load: max 14 kW - Heating power: max 13 kW - Fan output: approx. 500 m³/h - Connection voltage: 380 - 415 V 3/PE, 50 Hz, no RCD protection - Documentation: CE declaration Viewing in our warehouse possible at any time! Furnace, furnaces, industrial oven, curing oven, heat cabinet, heating oven, laboratory oven, drying oven, tempering oven, chamber furnace, kiln

Condition: as good as new (ex-display), Year of construction: 2025, New machine, in stock, available for immediate delivery - Capacity: 18,000 liters - Tmax: 450°C - Internal dimensions (L x W x H): 4100 x 2100 x 2100 mm - External dimensions (L with rails): 9970 x W 3060 x H (with lifting door) 6110 mm - Control system: Eurotherm Nanodac - Temperature stability (at rated temperature without load): ±5 °C - Automatic fresh and exhaust air dampers - Electric lifting door - Electrically driven bogie hearth - Power: 247 ± 9% kW - 400 V, 50 Hz - Documentation, CE declaration Please contact us! We are happy to offer installation, commissioning, and training of your staff. Hodpfx Asu Hma Neabofn Furnace, furnaces, annealing furnace, kiln, hardening furnace, heat furnace, tempering furnace, curing oven, drying oven, industrial furnace

Condition: excellent (used), Year of construction: 2017, Curing oven for inserting drying racks, 12-month warranty - For solvent-based substances according to DIN EN 1539 - Max. temperature 180°C Hfjdpfx Ajxfvfkjaben - External dimensions (WxDxH): 2520 x 1870 x 2300 mm - Usable space (WxDxH): 1700 x 1350 x 1660 mm - Suitable for the evaporation of small quantities of solvents, approved for paints and solvents up to hazard class A II in accordance with DIN EN 1539 - Max. permissible solvent quantity: 110 g per batch - Equipped with monitoring for minimum exhaust air volume and heating system - Connection: 400V / 50Hz / 21kW - Weight: 1,100 kg - Documentation included Suitable e.g. for vacuum thermoforming of plastics, fixing and drying of textile dyes, flock adhesives, as well as baking enamel and aluminum signs. Fans extract air from the drying chamber, guide it through thermostat-controlled heating elements, and reintroduce temperature-conditioned air into the chamber. Exhaust and supply air fans remove solvents released during the drying process, while simultaneously introducing fresh air into the chamber. Uniform temperature distribution is achieved via horizontal airflow in the drying chamber. Required temperature is easily adjustable via actual and target value thermostat. A safety thermostat acts as overheating protection. Inspection possible by appointment in our warehouse. Oven, ovens, drying oven, kiln, heating oven, heated cabinet, industrial oven, solvent oven, annealing oven, preheating oven, tempering oven, drying cabinet, chamber oven, circulating air drying cabinet, circulating air oven, paint dryer

Year of construction: 2018, condition: excellent (used), Chamber furnace, very good condition. 12-month warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Separate main switch - 5-sided heating Hfsdpfx Aajr Izctjbjn - Intake and exhaust air dampers, electrically operated via Belimo actuators - Intake air fan controlled by frequency inverter via controller - Door safety interlock - Stainless steel exhaust hood - Jumo Dicon Touch controller with data logging, 10 programs with 50 segments each Language setting of the controller can be changed upon request! - Additional type S signal pick-off element for external data logging - Door hinged on the right, controls on the left - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 amperes - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug We have several units of this type in stock. Viewing by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, enameling oven, tempering furnace, hardening furnace, laboratory furnace