Used Krauss Maffei Km 350 for sale (205)

Condition: excellent (used), Year of construction: 2006, Krauss MAffei KM 300-1000 C2 injection molding machine Year of manufacture : 2006 Closing system : Iodpfxsrbhhho Ab Iea Closing force : 3000 kN Mold opening force, max : 160 kN Moving force of moving plate Opening : 86 kN Moving force of moving plate Closing : 68 kN Size of mold plates (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Mold height min: 330 mm Max daylight: 1150 mm Injection system : Auger diameter: 55 mm Ls/D ratio: 20 Injection pressure: 1904 bar Injection volume : 523 ccm Injection weight, PS: 476 g Injection speed: 428 ccm/s General Data : Dimensions m : 5.97 x 2.04 x 2.36 Weight t : 12.5

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Ijdpfxouiykdo Ab Iea

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, injection pressure: 1.904 bar, overall weight: 10,900 kg, pressure: 1.904 bar, TECHNICAL DETAILS Operating hours Operating hours: 9,585 h Closing side Drive type: Hybrid Closing type: Toggle lever Construction: four-bar Closing force: 1,600 kN Panel size (h x v): 710 mm x 660 mm Rail dimensions (h x v): 520 mm x 470 mm Installation height: 200 mm / 600 mm Opening stroke: 1,050 mm Ejector stroke: 150 mm Ejector force: 33 Nm Centering D movable plate: 120 mm Centering D fixed plate: 120 mm Dimensions (LxWxH): 6,700 mm x 1,600 mm x 2,300 mm Total weight: 10,900 kg Injection side Screw diameter: 55 mm Stroke volume: 523 cm³ Injection pressure: 1,904 bar L/D ratio: 18 Screw geometry: 9 Screw speed: 243 1/min Screw torque: 827 Nm Iodpfju R I N Tsx Ab Ija Plasticizing system: 43 g/s PS Injection flow into the atmosphere: 297 cm³/s Number of heating zones: 6 Nozzle delivery force: 50 kN Voltage: 400 V / 50 Hz EQUIPMENT On-screen text in German CEE socket outlet 16A CEE socket 32A Pressure accumulator for increased injection capacity 3 freely programmable inputs and outputs each Core pull pneumatic 2x Machine with water battery Machine without material hopper Leveling elements Interface for deaerator Interface for temperature control unit USB interface Schuko socket 10A Low-wear plasticizing unit mold heating 24x

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Isdpsub S R Hofx Ab Isa Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Iodpow Hwthsfx Ab Iea

Condition: reconditioned (used), Year of construction: 2006, operating hours: 60,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture 2006. Screw diameter 85mm. MC5 control. Approximately 60,000 working hours. The machine is delivered REFURBISHED by our team of technical experts and in optimal working condition. We can offer commissioning services at our customer's premises, ensuring full functionality upon installation completion. Technical Details Screw diameter: 85mm Injection pressure: 2242 Bar Injection volume: 2695 cm3 Injection weight: 2452g (PS) Year of manufacture: 2006 Working hours: 60,000 Minimum mould thickness: 550/1100mm (Min/Max) Maximum platen distance: 2100mm Opening stroke: 1600mm Tie bar distance: 1120x1000mm Iodsw Avafjpfx Ab Ioa Platen dimensions: 1600x1530mm Clamping force: 8000 kN

Condition: excellent (used), Year of construction: 2016, Krauss Maffei Injection Moulding Machine KM 1600 – 17200 MX Year of manufacture: 2016 General description: A modern injection moulding machine featuring a fully hydraulic clamping system. Equipped with an advanced MC6 control system, based on an industrial computer operating on real-time Ethernet technology. Control is managed via an integrated 19-inch control panel with a colour touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit: Complete system for thermoplastic processing Screw diameter: 135 mm Version with anti-wear (abrasion-resistant) protection Non-return valve Open nozzle Iodpfx Abewyw Npj Isa Technical specifications: Clamping unit: Clamping force: 16,000 kN Mould opening force: 1,120 kN Platen dimensions (W x H): 2,550 x 2,100 mm Tie-bar spacing (W x H): 1,870 x 1,420 mm Opening stroke: 2,700 mm Mould height (min.–max.): 700 – 1,600 mm Max. daylight: 3,400 mm Ejector stroke: 350 mm Ejector force (forward/backward): 300 / 150 kN Injection unit: Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,784 bar Injection volume: 9,662 cm³ Shot weight for PE: 6,860 g Screw speed (nominal / max.): 81 / 100 rpm Electro-hydraulic equipment: Main drive power: 160 kW Installed heater capacity: 93 kW Number of barrel heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 / h Oil tank capacity: 2,400 l Dimensions and weight: Net weight with control cabinet: 92 t Machine dimensions (L x W x H): 14.17 x 4.04 x 2.93 m

Year of construction: 2022, condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Iedpfx Ajvpvlceb Ija

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, injection pressure: 2.387 bar, overall weight: 15,000 kg, TECHNICAL DETAILS Closing side Drive type: fully electric Closing type: Fully hydraulic Construction: four-bar Closing force: 2,500 kN Panel size (h x v): 995 mm x 1,050 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: min. 330 mm, max. 0 mm Opening travel: 820 mm Plate distance: max. 1,150 mm Rotary table size D: 0 mm Ejector stroke: 200 mm Ejector force: 58 kN Centering D moving platen: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping platens: M20 Mold weight: 3,430 kg Dimensions (LxWxH): 6.50 m x 2.20 m x 2.30 m Total weight: 15,000 kg Spray side Screw diameter: 55 mm Stroke volume: 570 cm³ Injection pressure: 2,387 bar L/D ratio: 22 Screw geometry: 9 L/D Screw diameter: 55 mm Iodpsu R Nuwsfx Ab Iea Screw speed: 260 1/min Screw torque: 82.4 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 126 cm³/s Number of heating zones: 6 Nozzle contact force: 60 kN Nozzle travel: 82.4 mm Pump drive power: 45 kW Heating power: 23 kW Voltage: 400 V / 50 Hz Oil tank capacity: 720 l EQUIPMENT 2x temperature control point for hot runner On-screen text in German CEE socket 16A Pressure accumulator for increased injection performance Ejector or core pull parallel Core pull hydraulic 1x Air valve 4x Machine with material straightener Machine with water battery Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Low-wear plasticizing unit

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Iedpfxjv Stbms Ab Ija Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: good (used), Year of construction: 2000, operating hours: 77,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, Type: KM 200-700 C2 (CLEAN ROOM) Year: 2000 Screw ø: 50 mm Operating hours: 77,000 h With accumulator Euromap 12 Isdewm Ifnepfx Ab Ija Injection pressure: 1,892 bar Island distance: 560 x 560 mm Molding table size: 915 x 915 mm Min tool: 350 mm Opening path: 700 mm Daylight: 1,050 mm

Condition: excellent (used), Year of construction: 1999, Technical Data: Clamping Unit: Maximum clamping force: 8,000 kN Mold opening force: 503 kN Opening stroke: 1,400 mm CNC control Mounting plate (H x V): 1,600 x 1,510 mm Clear space (H x V): 1,120 x 1,000 mm Maximum mold opening stroke: 1,400 mm Minimum mold installation height: 600 mm Maximum mold installation height: 1,100 mm Max daylight: 2,000 mm Ejector stroke: 250 mm Iedpow Idntofx Ab Ioa Ejector force: 226 / 95 kN Injection Unit: Calculated shot volume: 3,611 ccm Screw diameter: 105 mm Specific injection pressure: 1,580 bar Shot weight (PS): 3,286 g Oil volume: 2,000 l Machine dimensions (L x W x H): approx. 10,150 x 2,660 x 2,400 mm Weight: approx. 12.5 t Accessories: Number of core pulls: 4 Each with 8 water circuits The seller is not liable for typographical or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 8M2807A, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection pressure: 1,389 bar, injection weight: 6,098 g, TECHNICAL DETAILS Iodpfxevpg Nfj Ab Iea Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Iedswut Hyspfx Ab Iea

Condition: used, Year of construction: 1998, Injection moulding machine Krauss Maffei KM 300 1400 C1, year 1998 Control: Mc 3 Clamping force: 3000 kN Shot weight: 900 g Ijdpew D Hglofx Ab Iea Core pull: 2 Screw diameter: 60 and 70 mm Operating hours: approx. 18,000 h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 58,350 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, Clamping unit: Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 60 mm Ls/D ratio 21 Injection pressure 2000 bar Stroke volume 679 ccm Shot weight (PS) 618 gr. Injection rate 325 ccm/s Screw speed 259 1/min Plasticising rate max. 58 g/s Nozzle pressure 110 kN Isdjw H Rviopfx Ab Iea Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 14370 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water flow Additional Options: - 1 x Air valve - 2 x Core pulls - 8 x hotrunner controllers - Robot interface according to Euromap 12

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Ijdou Ti Sropfx Ab Ioa Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request.

Condition: like new (used), overall weight: 6,400 kg, maximum load weight: 650 kg, load capacity: 500 kg, Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate Iedpfxorrwdbs Ab Ija Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. Suspension: Rigid type centrifuge on inertia plate. Lid: with 3 manual opening closures, lid opening by means of a hydraulic piston (includes hydraulic power unit), a flat sight glass, an inclined sight glass, cake scraper, N2 inlet fittings and with washing tube and loading tube connections Transmission: 37 kW ATEX electric motor Securities: pneumatic lid opening safety piston, lid safety piston detector. lid open detector. detector for tachometer on machine and motor (includes connection box)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 61009829, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection weight: 6,098 g, ejector force: 200 N, opening stroke: 2,100 mm, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Iodevpg Iuepfx Ab Iea

Year of construction: 2008, condition: ready for operation (used), Press force: 1100kN, screw diameter: 35mm, injection weight: 140g, stroke volume: 154cm³, injection pressure: 2429bar, max. barrel temperature: 375°C, weight: approx. 8000kg, control: MC 5 3.0, operating hours: 25271h, pump hours: 29098h. Including one linear robot KM LRX 150, travel X/Y/Z: 900mm/1200mm/3000mm, load capacity: 15kg. Documentation available. On-site inspection is possible. Iodpfxowz N Tvs Ab Ija

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Iodpfx Abjwq D Efj Isa Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Iedjw Hthzopfx Ab Ija

Year of construction: 2016, condition: ready for operation (used), Clamping force: 2500kN, injection unit: 1400CX, pump motor power: 45kW, plasticising system: HPS-UN, screw diameter: 60mm, injection volume: 820cm³, plasticising stroke: 82.4mm, tie bar spacing: 530mm. Machine dimensions X/Y/Z: approx. 6500mm/2100mm/2300mm, weight: approx. 15000kg, control: MC6, pump hours: 42115h, automatic hours: 39148h. Includes conveyor belt MK GUF-P 2000 AF. Documentation available. An on-site inspection is possible. Expected to be available from December 2025. Iodow Exrpjpfx Ab Ioa

Year of construction: 2008, condition: ready for operation (used), A 3-component injection moulding machine Krauss Maffei with Multinject system, conveyor belt, cooling and hydraulic technology, and various accessories is available. Pump capacity: 37kW, screw diameter 1/2/3: 25mm/35mm/18mm, injection volume 1/2/3: 160cm³/220cm³/55cm³, nozzle bore: 6mm, non-return valves: RSP 4F. Total system dimensions X/Y/Z: approx. 5700mm/2000mm/2200mm, conveyor belt dimensions X/Y/Z: approx. 2300mm/300mm/600mm-700mm, weight: approx. 12000kg, control: MC4, pump hours: 51709h, automatic hours: 47009h. Without auxiliary unit. Documentation available. An on-site inspection is possible. Expected to be available from December 2025. Isdpsw Emyhofx Ab Isa

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible. Isdpow Emybofx Ab Isa