Used Krauss Maffei Km 350 for sale (224)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,11,569 h, clamping force: 10,000 kN, This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s Klodpfx Asywlvrjfpjt • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm forward movement actually used to inject the shot • Metering stroke: approx. 465 mm maximum screw travel during plasticizing • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance:

Year of construction: 2002, condition: ready for operation (used), screw diameter: 40 mm, This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. • Pump operating hours: 50,327 • Automatic operating hours: 36,908 • Screw diameter: 40 mm • Condition notes: Machine operational; SGM functional; SR circuit board has an intermittent/loose connection Klodpox D Hxljfx Afpjt Additional equipment • Robot: Sepro SR Success22 S3 Trans • Operating hours (powered on): 49,267 • Operating hours (automatic): 3,854 • Condition: Fully functional, good used condition • Storage conveyor belt (2014) • Optional: Reinhardt-Technik dosing system LSR 200 LLA (2013)

Condition: excellent (used), Year of construction: 2011, Year of construction: 2011, Kedpjtxymmefx Afpolt Arm range: 1717 mm, weight: 20 kg, Control unit: DX100

Condition: excellent (used), Hydraulic motor for Krauss Maffei injection molding machines. MOS 6500-30-168 Kjdpfjx Uqv Sjx Afpjlt

Condition: used, CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing Klsdpfx Afsnch Iiepot -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm Kedpfx Afog Avqcjpslt -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Kljdpfxox H Au Rs Afpot Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- Klsdoqvuicepfx Afpet 37 cm height-47cm length-8cm

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Kedpfx Afeh Nmt Dopelt Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: ready for operation (used), Year of construction: 2013, clamping force: 1,100 kN, total height: 470 mm, product length (max.): 470 mm, This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. • Mold opening force: 70.0 kN • Clamping plate (L x W): 745 x 770 mm • Internal dimensions (L x W): 470 x 470 mm • Mold opening stroke max: 600 mm • Mold installation height min: 300 mm • Opening width: 900 mm Additional equipment • Robot (included) • Water temperature control equipment (not included) • Conveyor belt (not included) Kledpfx Afsx D Ea Uepjt

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V Kledpsylkxaofx Afpst • Frequency: 50 Hz Additional equipment • Cooler (included)

Condition: good (used), Krauss-Maffei Injection unit 220 (complete) with electrical screw drive. Screw diameter 40 mm Kedpfxofwcrne Afpslt

Condition: reconditioned (used), We have several Krauss-Maffei MC3 control units that have been tested and are in good working order. Kledpfxot Uzbpj Afpet

Condition: used, Krauss Maffei Motherboard Klsdpfou Axihex Afpjt

Condition: new, It is new spare parts never used. Krauss Maffei MC 5 display M5V121 new never used Was bought for Krauss Maffei 2300 ton machine. Klodpfx Aeygucfofpjt M5-Anzeigeeinheit 12Z LxWxH 310x 360x60 mm 3600 g

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L Ksdexqhfyepfx Afpslt _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Kedpfexqx Avjx Afpslt Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: refurbished (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC6 TECHNICAL DATA CLAMPING UNIT - injection force: kN 10000 - distance between columns (h x v): mm 1400 x 1120 - distance of mold opening max: mm 1700 - mold installation height min/max: mm 700/1200 - opening stroke of the clamping platen: mm 2400 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 65 - dimensions of the machine (L x W x H): m 10,98 x 3,29 x 2,49 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Klsdpjnh Rhvofx Afpet Do not hesitate and ask us right away!

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Kljdpfxjmn Tu He Afpet

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 40 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, power: 18.5 kW (25.15 HP), Equipment: documentation/manual, In perfect shape. Kjdpfx Aswlhb Tofpslt

Condition: used, Year of construction: 1998, operating hours: 1,01,215 h, machine/vehicle number: 23J01415, clamping force: 23,000 kN, injection weight: 6,100 g, total length: 4,500 mm, total height: 3,800 mm, overall weight: 2,05,000 kg, # Sales Description Two high-performance injection molding machines from the renowned manufacturer KraussMaffei are available for sale. These are KM 2300-14700 MC models, specifically designed for the production of large-volume plastic parts and industrial series manufacturing. Each machine offers a clamping force of 23,000 kN, equipped with a screw diameter of 105 mm and a maximum shot weight of 6,100 g—ideal for applications involving large components and high material throughput. Both units are provided with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. The machines originate from the years 1997 and 1998 and have been operated in an industrial production setting. Technical Overview: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year of manufacture: 1998 - Operating hours: approx. 101,215 h Machine 2 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year of manufacture: 1997 - Operating hours: approx. 99,030 h Shared technical data: - Clamping force: 23,000 kN - Screw diameter: 105 mm - Max. shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Machine dimensions: - Depth: approx. 4,500 mm - Height: approx. 3,800 mm These machines deliver a reliable and field-proven solution for industrial plastics processing, making them especially attractive to companies seeking large-format injection molding capability. Klodsyt Hidepfx Afpst

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g EQUIPMENT Klsdpfxsy Exdls Afpot Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

Condition: good (used), Year of construction: 2007, operating hours: 47,963 h, functionality: fully functional, clamping force: 200 kN, For sale is an injection molding machine of the brand KraussMaffei and the type KM 200-220/220 CZ Multinject The machine is in a fully functional and well-maintained condition Technical data Year of construction: 2007 Clamping force: 200 t Aggregates: 2 Automatic hours: 47 963 Dimensions: 5200*2200*2700 mm Weight: 11,500 kg Further technical data will follow shortly Offer refers only to the machine, the peripherals shown in the pictures are not part of the offer On request, loading and transport (Europe-wide) can be organized for an additional charge. Ksdpfx Ajrvimbofpjlt Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2013, condition: good (used), Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Klsdpfx Afsyxn U Tspst Year of construction: 2013 Screw diameter: 38 mm L/D ratio: 30

Condition: good (used), Year of construction: 2002, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM575-1900C2 Klsdpfx Afjyak Htspjt Baujahr: 2002 Schließkraft: 575 Tonnen Holmabstand 1000 x 1097 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.097 cm³ Spritzteilgewicht: 998 g/PS Steuerung: MC4 Ausstattung: 5 St. Kernzug Roboter, Hersteller: Reis, Baujahr: 2015 24- Fach Heisszonenkanalregelung Förderband Schutzzaun