Used Kraus Und Reichert for sale (18)

Condition: good (used), Kraus and Reichert Kuris KVS700 Straight Knife Fabric Cutter Condition: Used and tested for functionality. _RD 6 kg Iisdpfx Aspitkgsanek Find more textile machines - new and used - in our shop! International shipping costs on request!

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed Iodpfegvvn Ejx Aanjik dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Iisdpfx Aox I I Ncjanjk Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: good (used), Three-phase motor, electric motor -Power: 11 kW -Frequency: 50 Hz -Speed: 2950 rpm -Frequency: 100 Hz -Speed: 5900 rpm -Shaft: Ø 35 mm -Design: B3 -Protection class: IP 55 -Dimensions: 520/210/H350 mm Iodpfsb A Rrnsx Aansik -Weight: 65 kg

Condition: used, Year of construction: 2024, Outstanding Kraus Maffei injection moulding machine from 2024. In perfect condition with only 588 operating hours. Equipped with: 1x pneumatic valve on MOP 1x Hydraulic Power Pack 20l 2x Hydraulic core pull 1x 4-fold water battery Can be inspected under power upon appointment. Immediately available for delivery. More info available on request. Injection unit: 1400 Screw: 60 mm / 23.00 wear protection / 25.50 Min/Max tool installation height: 250/600 mm Max opening Width: 1150 mm Ejector: Platten Ejector EM hydraulix/electric Core Pull: 2 hyd Air valves: 1 MMP Control system: MC P1 Power supply: 400 / 230 V 50Hz 3 phase with neutral Iisdex Ald Rspfx Aanek Clamping force: 2500 kN Injection capacity: 679 cm³

Year of construction: 2005, condition: excellent (used), Manufacturer: Kraus Type: RBA 89 Year of manufacture: 2005 Load capacity: max. 1500 kg/pallet Roller width: 1380mm Track width: 1450mm Roller diameter: 100mm Axle distance between rollers: 120mm Total length: 1500mm Power: 0.75kW / 28 U/min Speed: 21 m/min Iiedpfx Aenxkbpsanok Optionally with legs.

Condition: used, Year of construction: 2002, Technical details: voltage: 400 / 460 V Cooling capacity: 5,6 kW dimension machine xH: 0,6 x 0,6 x 1,0 m Total weight, approx.: 150 kg Fresh air suction at the front on 540 x 400mm and exhaust air via ceiling Ø 360mm Compressor Maneurop MTZ 40JH4 AUE Refrigerant R 134 a; cooling capacity 5.6kW next maintenance check 03/2024 * Iisdpou N Alyefx Aanek

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Isdpfx Asxg Hxweanoik

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t Iisdpfsx I I Ilex Aanek (1) Calibration table Technical details: Four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off/saw combination Technical details: Weight approx. 1.8 t, with two (2) IDE chip extraction systems ME AS 58 (1) Tilting table Technical details: Length approx. 6 m, weight approx. 300 kg

Condition: good (used), Control load switch, FI/LS switch, motor protection switch, reversing switch -Type: CG8 D-V226-602 FS1 -without: shift knob Isdpfx Aeb A I Sisansik -Price: per package -6 pieces: per package -Number: 5x packages available -Weight: 0.6kg

Condition: used, Year of construction: 2001, functionality: fully functional, type of cooling: water, KKT Chiller Model KLC-S 17T-RS with current refrigerant R407c The water cooler was tested on a counter heater under full load; Iiodpfx Aowhc Exsanek no defects were found. Price net ex-site, packaged and loaded onto a truck

Year of construction: 2005, condition: excellent (used), Manufacturer: Kraus Type: RBA 89 Year of manufacture: 2005 Iodpfx Aasnxkagenjik Load capacity: max. 1500 kg/pallet Roller width: 1380mm Track width: 1450mm Roller diameter: 100mm Axle distance between rollers: 120mm Total length: 3000mm Power: 0.75kW / 28 U/min Speed: 21 m/min Optionally with legs.

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Iisdpfsx I Inxex Aanek Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 35 rpm -Power: 1.1 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 590/300/H400 mm -Weight: 60 kg Iedpfx Aocg Ambeaneik

Condition: like new (used), Year of construction: 2017, Manufacturer: Kraus Year of manufacture: 2017 board length: 1600 board width: 1400 Roller diameter: 100 mm, material: steel. Axle distance between rollers: 120 mm Load capacity: 2000 kg Lifting height: 1700mm Without hydraulic power supply unit! Iiodpfx Aaonr Hfyjnjk Chain drive, with gear electric motor. 1.1kW, 400V, 50Hz

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm Iisdpfx Ajx I Ig Uoanok

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz Isdpfx Aaob Rynxenjik -Output: 300 V 165 Hz -Power: 25 KVA -Dimensions: 800/400/H320 mm -Weight: 224 kg

Condition: used, Line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: With three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed 0.1–11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Punching device + guillotine unit Iedpex I Emfjfx Aaneik Technical details: Punching force 1,800 N, design: C-frame, punching frequency 130 strokes/min, punching tool LxWxH 185x180x132 (1) Tilting table Technical details: For pushing a single-strand roller shutter into an adjacent profile, table length approx. 6,000 mm