Used Krones Labelling Machine for sale (138)

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: Predpeytvyfofx Airec - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Year of construction: 2018, Overview  This wrap-around case packer (cardboard packaging machine) was manufactured in 2018 by Germany KRONES. The VARIOPAC PRO W-7 is designed for cardboard packaging of PET bottles. The machine is still installed, connected to energy, and currently in production. It will be available from mid of May 2026 and can be visited in production on request. Technical data  - Capacity: 67 cartons/min (x6) - Formats: Predpfx Aisy A Nd Dersc - 1000 ml – 3×2 – single lane - 500 ml – 6×4 – single lane - Application: Cardboard packaging (wrap-around) for PET bottles - Configuration: Wrap-around case packer

Year of construction: 2011, operating hours: 10,500 h, condition: used, machine/vehicle number: ISP17, Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated safety devices that protect the components from overload or malfunction. In addition, the compact and durable enclosure facilitates easy integration into existing production layouts. Year of production and machine hours KRONES produced this unit in 2011. Since then, the machine has logged 10,500 operating hours, which reflects moderate usage for equipment designed for industrial use. Compared to other models with similar functionality, this unit maintains good performance standards. Moreover, the machine structure shows minimal wear, confirming its careful maintenance. Therefore, technicians can expect reliable functionality without immediate need for major refurbishment. The machine is currently operational, specifically until Easter. Then it will be dismantled.  Supported inspection types The Used Inspector KRONES Linatronic K735 year 2011 is equipped with a comprehensive range of inspection functions to ensure the quality and integrity of each bottle. Pedpfx Ais Adyv Uererc -The system performs bottom inspection to detect chips, cracks, or foreign objects at the base. -The sidewall (walls) inspection uses a rotating mirror and cameras to identify defects such as scratches, cracks, or dirt on the entire lateral surface. -The neck finish and thread inspection ensures that bottle openings are free from damage or deformation that could compromise sealing or capping. -Scuffing inspection checks for surface abrasions that indicate excessive wear. In addition, the machine employs infrared (IR) and high-frequency (HF) technology to detect residual liquid, ensuring the bottles are dry and ready for fill...

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data - Manufacturer: Krones AG - Machine Type: Filling and capping monoblock - Model / Identification: Krones Modulfill - Year of Manufacture: 2012 - Application: Filling and closing of glass bottles - Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) - Filling System: Volumetric filling - Filling Valves: 60 - Capping Heads: 12 - Closure Type Observed: Plastic screw cap - Target Output: approx. 15,000 bottles/hour - Operating Hours: 41,381 h Psdpezcga Ujfx Airorc - Production Counter: 40,754 h - Control Interface: Krones iPanel CD - Electrical Supply: 400 / 230 V - Current Type: AC 3/N/PE - Frequency: 50 Hz - Full Load Current: 36 A - Construction: Stainless steel and glass safety enclosure - Condition: Used, observed in operational production environment

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Equipment Predpfoy Azq Njx Airoc - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) - Base inspection system - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, *consisting of: * - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, Prsdpfx Aioz Sdtvsrjc - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour *Details*: - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Condition: used, Year of construction: 2003, Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulder's infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data - Manufacturer: Krones - Machine type: preform feeding system for a stretch blow moulding machine - Operated with: Krones Contiform S24 blow moulder - In production until: March 2026 Scope of Delivery - Preform buffer silo | Krones | stainless steel hopper with access stairs - Preform elevator | Krones | inclined elevator from the silo to the roller sorter - Roller sorter | Krones | orients the preforms and feeds them into the blow moulding machine - Access platform | Krones | steel platform with stairs and railings Condition Used, dismantled and stored. The preform tipper and the electrical control cabinet are not included; the preform tipper visible in one photo is not part of the offer. Availability Predpoz Sr Imofx Airoc Available immediately. Location: Germany. Viewing is possible.

Condition: used, Year of construction: 2017, Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A  Prsdet Rbznepfx Airec

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L Psdpfxoxhf Hie Airsrc - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1881 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Included in the price - Dismantling - Loading onto trucks - Export documents

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line for glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 12.000 BPH (miniature 0.05L bottles)Filling type: vacuum fillingBottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant ... Pedpfx Aey Uduujirerc

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Podpsukkvnsfx Airsrc

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Pedsythznepfx Airsrc - Capacity: Not provided - Formats: - 0.75 L Gourmet bottle - 0.25 L Gourmet bottle - 0.25 L Vichy bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems: - Base inspection (camera) - Sealing surface inspection - Thread inspection (conical optics) - Mouth / finish inspection - Sidewall inspection with LED illumination - Detection of transparent films on bottle base and sidewall - Scuffing detection via sidewall camera - Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit - Transport height: approx. 1,050 mm - Direction of operation: Left machine

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Podpsl Hxniefx Airsrc

Condition: used, Year of construction: 2014, Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data - Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. - Formats: Prodpfozb Afqsx Airec - 0.75l bottle - 0,5l bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth / finish inspection Sidewall inspection with LED illumination Detection of transparent films on bottle base and sidewall Scuffing detection via sidewall camera Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Direction of operation: Left to right

Condition: used, Year of construction: 2004, operating hours: 55,000 h, Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 V Frequency 50 Hz CAT – CTA – CONTROLLED AIR TEMPERATURE Brand: CIAT Year: 2009 Controls the air temperature inside the KRONES CLEAN chamber to maintain the same temperature and also for clean room over-presurization. Podpjvgugtjfx Airerc FILL LEVEL INSPECTOR Brand: HEUFT Krones Used Filling Monoblock for Still Water –  IMMEDIATELY AVAILABLE – AND READY FOR PACKING AND SHIPPING! We can assist your company both in disassembly and assembly, we have competent staff and able to use the correct technology to reinstall this krones equipment. We can carry out a complete project of reinstallation and start-up of production with replacement of every damaged part or to be changed. We need about 1500 square meters for the entire bottling line, with the current layout. The disassembly work requires at least 30 days to be carried out carefully and marking all the cables and mechanical parts. All the programs are downloaded to ensure that no information is lost.

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Prsdpfxjz I Tbrs Airsc Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 2003, Overview This Krones Blitzpac case packer, manufactured in 2003, is designed for the automatic packing of PET bottles into crates. The machine is configured for handling of 1.0 l PET bottles, packed into 12-bottle crates. The machine has a stated design capacity of approx. 2,700 crates per hour. Product handling is carried out by a mechanical / pneumatic matrix gripper system, which lifts multiple rows of bottles and places them into crates. The machine is fully enclosed with transparent safety guarding. Operation is controlled via an integrated MTS 10 HMI panel, with physical push-buttons and emergency stop. Technical Data - Manufacturer: Krones AG - Machine Type: Blitzpac case packer / bottle packer - Machine Description: Blitzpac Einpacker 23 Year of Manufacture: 2003 Podpfx Aozb Aghsirsrc - Application: Packing of PET bottles into crates - Pack Format: 12-bottle crate - Capacity: approx. 2,700 crates/hour - Control / HMI: MTS 10 operator panel - Bottle Handling: Mechanical / 7pcs. pneumatic matrix gripper for multi-row bottle handling - Condition: Used, observed in industrial production environment

Condition: used, Year of construction: 2003, machine/vehicle number: LC643, Used SIG CSD can filling line 30000 BPHTechnical Specifications & Performance DataThis used bottling line features industrial components engineered by Krones and SIG Simonazzi, suitable for second hand industrial packaging and beverage production environments. Verified data plates provide key technical values to support integration and qualification.Year of construction: 2003Formats: 330ml ( slim, international standard "202 lid")Electrical supply: 400 V, 3-phaseFrequency: 50 HzRated current: 37 AShort-circuit rating (ICW/ICU): 1.26 kAPressure vessel volume: 504 litersTest pressure (PT): 11.44 barAllowable temperature range (TS): -4 °C to 50 °CCompliance: CE 0036Manufacturers: Krones, SIG SimonazziAdvanced Automation & Control SystemsThe line incorporates an industrial-grade power and control architecture designed for reliable 24/7 operation in beverage packaging. Three-phase power distribution at 400 V and 50 Hz supports stable performance of key units, with a 37 A rated current on the main controlled section referenced. Protective coordination and short-circuit withstand ratings (ICW/ICU) are identified to 1.26 kA, aligning with robust switchgear and control cabinet design. Operator interfaces, interlocks, and modular controls can be paired with upstream/downstream equipment to streamline changeovers and routine operation.Production Line Integration CapabilitiesEngineered for seamless integration into complete packaging lines, the equipment accommodates conventional upstream and downstream modules such as rinsing, filling, capping, labeling, conveying, inspection, and end-of-line packaging. The documented pressure vessel capacity (504 liters) supports process stability for buffer or service functions within a bottling layout. Modular connectivity enables inline operation with standard conveyor systems and synchronizes with typical line controls used in beverage production.Machine Condition & Maintenance HistoryThe components carry CE markings and documented nameplate data confirming construction year and key safety/pressure parameters. Industrial construction by Krones and SIG Simonazzi is indicative of long service life and high reliability when maintained according to OEM guidelines. Actual runtime, service records, and overhauls should be verified during inspection to align with targeted performance and validation requirements.Operational Performance & VersatilityThis second hand bottling equipment is suitable for a wide range of industrial packaging applications in beverage production. The pressure-rated vessel supports stable process conditions, while the electrical configuration is appropriate for common European plant utilities. The line can be configured with compatible modules to match target output, quality controls, and packaging formats as required by the specific production program.Installation Requirements & Site PreparationInstallation requires 400 V, 3-phase, 50 Hz power. Site preparation should consider adequate space for line layo... Pjdpfoziy Ausx Airerc

Condition: used, Year of construction: 2006, Overview  Pedpsw T Sthofx Airerc This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Prjdpfx Aijzb Ad Terjc - Manufacturer: Krones / Krones Zierk GmbH - Model / Type: K6W-25-S-E - Machine Type: Crate washing machine - Year of Manufacture: 2000 - Application: Washing / cleaning of beverage crates - Construction: Stainless steel machine housing and frame - Conveyor System: Integrated slat-chain conveyor and crate transport sections - Drive System: Electric drive motor with gearbox - Inspection Access: Viewing window with safety latch hooks - Control System: Integrated electrical control cabinet - Operator Panel: Push-buttons, indicator lights and red rotary main switch - Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Podjqqz T Hepfx Airerc

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Podpfx Aeqqz Txoirorc

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg Predporxuv Asfx Airjc

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures - production capacity: 32,000 bph at 1.0 L - direction of rotation: clockwise Predpfxsyluwte Airoc - availability: beginning of October 2026

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  - Capacity: 30,000 bph (all formats) - Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) - Filling valves: 96 - Capping heads: 18 - Closure type: Crown cork - Direction: Clockwise (L–R) - Diameter: 2,880 mm - Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout - Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water - Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  - Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system - Control system | Siemens | S7-300 | 2009 | PLC retrofit - Safety fences - Spare parts   Podexc H Tgspfx Airerc