Used Kuper Fwj 920 for sale (50)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C Chodpfx Alsxt Idbofjd endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Year of construction: 1994, condition: used, Bottling line - Mustard and horseradish packaging The line consists of: 1. Piston filler - KUPER 2. Machine for closing jars Chodpfx Alezzax Hefod 3. Bottle filler - NOVOPACK 4. Machine for separating jars 5. Transporters

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Chsdpfevvlyijx Alfjd Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: excellent (used), We are offering this used Kuper F. WM 630 veneer sewing machine for sale; the year of manufacture is unknown. Manufacturer: KUPER Serial No.: 2906 12339 The advertised price is 800 euros net (negotiable). Chedpfxez Afcyj Alfjd If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Working width 300 mm Mechanical oscillation Codoyux Syopfx Alfehd Shoe Weight approx. 450 kg Star-delta motor start 380 V

Condition: good (used), Code: 0493 Brand: KUPER Csdpfxoz Ia T Us Alfshd Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: used, Second-hand Kuper veneer joining machine for the professional joining of veneers. Technical data: Chodpfx Aezxhg Telfsd - Motor: 0.55 kW

Condition: good (used), Code: 0491 Brand: KUPER Model: FW MINI 630 - CE Standard Cedpfxez Hw S Sj Alfehd Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Chodpfxeyayume Alfjd Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, total width: 1,850 mm, total height: 1,750 mm, Year of manufacture: 2008 Colour: White Empty weight: 4.000 kg Dimensions (LxBxH): 310 x 185 x 175 cm Four-axis planer Kuper SWT 23 XL-5R Year of construction 2008 min/max Working height 8/150 mm min/max Working width18/230 mm Spindle speed 6000 rpm Spindle diameter 40 mm Motors Spindle - horizontal down 7.5kW  Spindle - vertical right 7.5kW Spindle - vertical left 11kW Spindle - horizontal top 11 kW Dimensions 3100 x1850 x 1750 mm (L x W x H), weight 4000 kg Outfeed table  Weidner buffer table Type DBT 4500B Cjdewnit Ajpfx Alfshd Dimensions 4500 x1750 x 97 mm (L x W x H) - Year: 2008 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - Min. planing width [mm]: 18 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 150 - Transport dimensions: 3100mm x 1850mm x 1750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1995, Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Cjdpfx Alehbp Ifsfshd Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: used, Second-hand KUPER RFG roller shutter guide milling machine for milling the roller shutter guide slots into the roller shutter guide strips / roller shutter guides / roller shutter guide rails, fitted with a Scheer HM 16 hand-held router. Technical data: Cjdpfszza A Sox Alfjhd - Speed: 18,000 rpm - Power: 2,000 W

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 2087, functionality: fully functional, overall weight: 4,000 kg, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 125 mm, TECHNICAL DETAILS Chodpfx Alszrmpaofed Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed rate: 6 m/min Maximum feed rate: 28 m/min Number of spindles: 6 Spindle speed: 6,000 rpm Spindle diameter: 40 mm Spindle motors 1. Spindle, bottom: 5.5 kW 2. Spindle, right: 5.5 kW 3. Spindle, left: 7.5 kW 4. Spindle, top: 11 kW 5. Spindle, top: 7.5 kW 6. Spindle, bottom: 7.5 kW MACHINE DETAILS Main fuse: 105 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: good (used), Code: 0240 Brand: KUPER Cjdpfxeyxmrwe Alfjhd Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Condition: excellent (used), 1.6 kW motor, 2,300 m³/h, 16 cm inlet Codpfx Aey Aagcolfohd

Condition: used, Second-hand machine Second-hand veneer splicing machine from Kuper, model FW 1150 Passage width: 1150 mm Cjdpfszk Nqqsx Alfohd Feed speed: approx. 10–30 m/min Veneer thicknesses: 0.3–3 mm excluding tables at the front and rear Availability: at short notice Location: Röllbach

Condition: used, total width: 2,000 mm, total height: 1,800 mm, Year of manufacture: 2006 Colour: Grey Empty weight: 4.000 kg Dimensions (LxBxH): 490 x 200 x 180 cm Four-sided planer Little Kuper SWT 23 XL-6 Year of construction 2006 min/max Working height 8/125 mm min/max Working width18/230 mm Working speed 6/28 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines 1st. Spindle - under 5.5 kW 2nd Spindle - right 5,5kW 3rd Spindle - left 7.5kW 4th. Spindle - above 11kW 5th. Spindle - above 7.5kW 6th Spindle - under 7.5kW Main fuse 105 amp. Dimensions 7500 x 2000 x 1850 mm (L x W x H), weight 4000 kg - Year: 2006 - Serial number: 2087 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Motor power [kW]: 5.6 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 160 - └ Spindle 2: - - Motor power [kW]: 7.6 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 170 - └ Spindle 3: - - Motor power [kW]: 9.7 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 170 - └ Spindle 4: - - Motor power [kW]: 15.2 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 160 - └ Spindle 5: - - Motor power [kW]: 9.7 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 160 - └ Spindle 6: - - Motor power [kW]: 9.7 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 170 - Max. planing width [mm]: 230 - Max. planing height [mm]: 160 - Feed table length [mm]: 2250 Chodexyvzujpfx Alfjd - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.6 - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: - └ Min. feed speed [m/min]: 3 - └ Max. feed speed [m/min]: 20 - Voltage [V]: 400 - Current consumption [A]: 105 - Fuse [A]: 125 - Power [kW]: 72.0 - Transport dimensions: 4900mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Kuper FWJ900 With glue thread, well-maintained condition Max. veneer thickness 2 mm, min. 0.4 mm Chjdpfx Alsvrk Sijfjd Control via foot pedal Stand model, feed speed 7 mm, Projection 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Chodpex Upgcofx Alfod

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Chjdpfjxgqmxsx Alfsd Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7560, working width: 1,200 mm, Equipment: documentation/manual, TECHNICAL DETAILS Working width: 1,200 mm MACHINE DETAILS Connected load: approx. 51 kW Chsdpfxsy Ed A Te Alfod EQUIPMENT Documentation

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm Cedpfsvwf Dwjx Alfehd thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: new, Number of spindles 6 St. Working width 15 - 250 mm Working height 10-200 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ----- - ??Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9" Touchscreen Manufacturer's Description (Summary): ----- 1st Spindle: HORIZONTAL BOTTOM ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 275 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool cutting circle: 125 - 160 mm Rebating unit: 20–25 mm diameter difference relative to planing head Important: Machine cannot be operated without the jointing/rebating cutter Extraction nozzle: D = 125 mm "Pro-Lock" tool clamping system 2nd Spindle: VERTICAL RIGHT ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 176 mm Clamping length (effective length): 170 mm Speed, frequency-controlled: 6,000 - 8,000 rpm Tool cutting circle: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 3rd Spindle: VERTICAL LEFT: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 176 mm Clamping length (effective length) 170 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 60 mm Standard profile depth 20 mm Table plate adjustable to tool radius Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector (chips discharged downwards) "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 4th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Pneumatic pressure shoe, dynamically adjustable via linear guides Pressure lips in front of the spindle: pneumatically sprung, externally adjustable, with path control Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 5th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Chedpfx Aezrh E Nelfod Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction: individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized ...

Condition: new, Number of spindles 4 St. Working width 15 - 230 mm Working height 10 - 125 mm Feed speed 6 - 24 m/min. Chedpfx Alsyhq Ugsfed

Condition: used, Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm Cedpfxjdzzimj Alfjhd -Shaft: Ø 19 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 260/180/H150 mm -Weight: 6.1 kg