Used Veneer for sale (531)

Condition: repair required (used), Year of construction: 1969, functionality: limited functionality, machine/vehicle number: 2649, cutting length (max.): 4,200 mm, Equipment: safety light barrier, The machine is largely functional, but the optional “AFTER-CUT” function is impaired. Service and functional adjustments are required. Heds Agw Hzopfx Airew Includes some replacement blades.

Condition: good (used), Year of construction: 1980, functionality: fully functional, total length: 2,980 mm, total width: 1,530 mm, total height: 2,100 mm, Equipment: documentation/manual, We are offering this used Joos HP 90 veneer press, manufactured in 1980. Joos HP 90 hydraulic veneer press with electric combination heating plates. For sale is a well-maintained veneer press with the following specifications: - Press area: 2.55m x 1.35m - Height of press chamber: 0.4m Hsdpfx Ao Agb Nboirjw - Operating pressure: 355 bar - Overall dimensions: 2.98m x 1.53m x 2.1m - Manufacturer: Joos - Model: HP 90 - Year of manufacture: 1980 - Machine type: Veneer press - Press area: 255 x 135 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Hjdpfj Afznujx Airjw Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: good (used), Year of construction: 1992, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 115 t, stroke length: 400 mm, total length: 3,480 mm, total width: 1,570 mm, total height: 2,240 mm, overall weight: 4,900 kg, HP115, year of manufacture 1992, printing size 3000 x 1350mm, 6-cylinder, cylinder diameter 80mm, emergency stop pull cord, gold-anodized plates, maximum printing pressure 115t, operating pressure 365 bar, machine number: 15238. Hsdpfx Aie Agvk Isrsw

Condition: excellent (used), Shelf length: 250 cm Hjdpfs Ag Emhex Airjw Shelf width: 130 cm Clearance: 40 cm

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm Hodpfx Aisx Edl Ejrsw heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data • Manufacturer: Langzauner • Type: LZT 100-SF • Year of manufacture: 2007 Hsdpfxsz Dai Uo Airsw • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates

Condition: like new (used), functionality: fully functional, hot-air welding machine with adhesive zigzag stitching foot pedal control arm clearance 650mm power supply 230V External dimensions: 900x320x450 mm Weight: 40 kg Hsdezz N Hyjpfx Airjw

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Hsdpfxeyku U Ne Airow Motor output 1,8 kW machine weight ab. 500 kg

Condition: excellent (used), Year of construction: 1967, I sell the veneer guillotine Josting PFS 2100. Year 1963 and 1967 (2pcs. available on stock). Cutting length 2100mm. Cutting height 60mm. Cutting width 20-680mm. Hjdpjyc Nh Uefx Airew Very good condition. Available immediately.

Condition: like new (used), Year of construction: 2026, machine/vehicle number: Pro.b 301365530.165, functionality: fully functional, pressing force: 30 t, stroke length: 535 mm, number of cylinders: 6, workpiece length (max.): 3,000 mm, cylinder diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! The machine is new and has no operating hours! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 30 t Number of cylinders: 6 Cylinder diameter: 60 mm Plate material: Steel Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 535 mm Total stroke: 535 mm Number of working areas: 1 MACHINE DETAILS Hsdpo Af Hidofx Airsw Operating hours: 0 h Voltage: 400 V Current consumption: 5 A Fuse rating: 16 A Main motor power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,700 x 1,950 mm Unladen weight: 2,000 kg Number of transport packages: 1 EQUIPMENT Documentation CE certificate CE marking

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Hsdpfx Asz Rn Sfjirsw Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Hjdpfx Aijz I Tiporjw Current consumption approx. 22 A Fuse 25 A Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Weight approx. 14,000 kg

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Hsdjwq D Tpopfx Airjw Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Price 2800.-

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm Hodpfxsz D Afrj Airjw plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm pressure 3kg/cm2 pump motor power 2,2kW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width 2700 mm working height 100 mm hydraulic cutting gauge adjustment to size Hsdpfx Aiez Ehqcsrjw cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: good (used), Year of construction: 1995, overall weight: 4,500 kg, High-quality veneer shears with 2 blades for optimal joint cutting. Hjdpfozvvffsx Airjw Maximum processing length: 2600 mm. CE marked.

Condition: good (used), RFR Veneer Guillotine * Manufacturer: RFR * Machine Type: Veneer Guillotine * Cutting Length: 4,700 mm Hedpfx Ae Af Sbteirjw * Condition: Used * Accessories: Original operating manual and technical drawings available.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. Hodpfx Aewnpcdsirsw The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 – Length of working plates: 4200 mm – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm Hedpfx Aioz Ix Auorew – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Hedpfx Aieyxp Twerew Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 2020, total length: 3,000 mm, total width: 1,300 mm, total height: 1,900 mm, Veneer press Manufacturer: Stema S.r.L. Type: P – 90 C Year of manufacture: 2020 Dimensions (l/w/h): 3,000 x 1,300 x 1,900 Weight: approx. 3,800 kg Pressing force / pressure: 70 – 90 t Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial businesses. Hjdpfxjz Ip H Rs Airjw Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 1961, Used Machine Features and Technical Specifications: Platen size: 2500 x 1300 mm Machine is designed for disassembly Total pressing force: 60 metric tons With 6 pistons, each 60 mm Specific pressing force: 1.85 kg/cm² Plate spacing: 350 mm L x W x H approx. 3230 x 1340 x 1775 mm Availability: immediately Hjdpfx Aiozyy Apsrew Location: Rhineland-Palatinate

Condition: like new (used), Year of construction: 2019, operating hours: 1,800 h, functionality: fully functional, machine/vehicle number: 142400, A powerful and reliable machine for industrial veneer processing. Robust construction, precise operation, and a suitable solution for operations that prioritize efficiency and consistent performance. The CrossRunner 1600/2500 model offers a working width of 1600 mm and a length of 2500 mm. Suitable for professional production and daily operation. Hodpfozg Dl Uex Airew

Condition: used, machine/vehicle number: 2001 5170, For sale is a KUPER FWJ 900 veneer assembly machine manufactured in Germany. The machine is in good, well-maintained used condition and is immediately ready for professional use in veneer processing. The FWJ 900 operates with glue threads and hot air and is suitable for assembling or joining veneer sheets. The machine has an overhang of 900 mm and is operated via a foot pedal. Technical data: Manufacturer: KUPER Type: FWJ 900 Machine number: 20015170 Overhang: 900 mm Process: Veneer assembly with glue threads Heating: Hot air Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4–2.0 mm Operation: Foot pedal Hodpfxoz Ep R Ro Airsw Stationary model Compressed air connection: available Includes a large work table in front of the machine Includes a work table behind the machine Inspection and functional testing possible while powered on The existing work tables offer a generous support area and are ideal for processing larger veneer sheets. The machine can be inspected on-site while powered on and its functionality can be tested.