Used Laser Punching Machine for sale (65,157)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, controller manufacturer: Bodor, controller model: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, laser source model: Fiber, laser power: 1,500 W, working length: 3,000 mm, working width: 1,500 mm, power: 1.5 kW (2.04 HP), warranty duration: 300 months, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Duodpfxshvu Hye Am Tsw Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Dujdpsywwrfsfx Am Tsw Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Dusdohv U Szepfx Am Tow Laser Power: 1500W, 2000W, 3000W, 6000W Cutting Area: 4000*2000mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: SN201000003, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller model: FANUC Series 16i-LB, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: FANUC LASER C4000i-B / C4000i Model B, laser hours: 13,443 h, laser power: 4,000 W, laser wavelength: 106 nm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 170 m/min, positioning accuracy: 0.1 mm, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 19,500 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, For sale: CNC CO₂ laser ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5 – 4 kW Used CNC laser cutting machine for sheet metal, ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5, is for sale. The machine is equipped with a FANUC CO₂ laser source C4000i-B, 4 kW, and a FANUC Series 16i-LB CNC control system. The laser has a working area of approximately 3000 x 1500 mm and is suitable for cutting carbon steel, stainless steel, and aluminum, depending on the material, thickness, gases used, and machine settings. The machine is equipped with the following main peripheral units: Thermotec chiller, Metal Working srl suction/filtration system, Atlas Copco dryer/air preparation system, and Precitec cutting head. It has an exchangeable/movable table for easier loading and unloading of sheet metal. The machine features two loading tables. Main technical data: Duedeziluispfx Am Tow Manufacturer: ERMAKSAN MAKINA SANAYI TIC. A.S., Turkey Model: LASERMAK 4000.3 x 1.5 Type: CNC CO₂ laser cutting machine Working area: approximately 3100 x 1500 mm Laser source: FANUC LASER C4000i-B Laser power: 4000 W / 4 kW Max pulse peak power: 5000 W Control: FANUC Series 16i-LB Axes: X-Y-Z-U-V Maximum positioning speed: 170 m/min Power supply: 380 V Electrical consumption: 75–90 kW Dimensions: 5285 x 10480 x 2040 mm Weight: 19,500 kg Cutting head: Precitec Chiller: Thermotec LJ45A35 Suction: Metal Working srl UNIT-POLYGONAL Dryer / air preparation: Atlas Copco CD 25+ Serial number: SN20100003 Laser source production: FANUC, Japan, May 2011 Maximum cutting thicknesses: Carbon steel: up to 20 mm Stainless steel: up to 12 mm Aluminum: up to 8 mm Additional equipment: Thermotec LJ45A35 chiller Metal Working srl suction/filtration system Atlas Copco CD 25+ air preparation/dryer system Precitec cutting head FANUC Series 16i-LB CNC control system FANUC CO₂ laser source C4000i-B Exchangeable/movable table Condition The machine is available and can be inspected on-site. It is sold in its current condition, with all the equipment included. It is suitable for manufacturers of metal products, metal structures, sheet metal components, and companies looking for a powerful CO₂ laser with a large working area. Inspection is possible by prior arrangement.

Condition: used, Year of construction: 2007, Control system, manufacturer: Boschert; quick-change tool system, manufacturer: Trumpf; punching force: 3 x 280 kN; Station 1: Trumpf system tool, size 3 (105 mm) with spray device; Station 2: Trumpf system tool, size 3 (105 mm), free-rotating and indexable; Station 3: Trumpf system tool/Boschert Revotool, size 3 (105 mm), including Revotool 8-position tool holder; travel distances: X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm; punching arm overhang: 1,730 mm; sheet metal thickness max.: 6 mm (clamp opening); stroke height max.: 90 mm, programmable in infinitely variable steps upwards and downwards; punching slug extraction; ball bearings in the machine table; table width left + right: 3,200 mm each; table depth: 2,810 mm; table height: 900 mm; overall width: 6,482 mm; overall depth: 4,600 mm; overall height: 2,110 mm; with workshop trolley, manufacturer: KS Tools, 7 drawers, contents: various hand tools. Djdpfx Aezkah Tem Teuw +++ ATTENTION: This machine is part of an online auction! +++

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, Simple laser tube cutting – reliable, versatile, and profitable. Economical laser cutting of tubes up to 170 mm outer diameter, even with low utilization rates. Whether you want to insource quality, manufacture in a more flexible and faster manner, or tap into new customers and markets: the TruLaser Tube 3000 is your machine, and thanks to its easy operation, it is also ideal for beginners or as an additional machine. Included: Tube support (raw material) with automatically retractable tube supports Solid-state laser TruFiber 3001 Machine bed for 6.5 m raw material length Unloading station for 3 m finished part length (including scrap container) LoadMaster Tube for 6.5 m raw material length (including bundle trough) for automated loading Optional extensions: Duedpfxszi Rc Es Am Tjw Machine bed for 8.0 m raw material length for loading and unloading Technology packages for bevel cutting, Rapid Cut, and reduction of spatter adhesion (Spatter Guard) Weld seam detection (SeamLine) inside and outside Highly innovative and user-friendly TRUMPF programming with Programming Tube Service: Installation, commissioning, training 12 months warranty Remote service agreement in the first year TRUMPF quality Our fast remote service support takes care of your needs worldwide. For further technical data, please refer to the data sheet or visit our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design and implementation of many thousands of sheet metal fabrication projects, particularly in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, as well as experts in software, automation, and smart factories, you will always receive a customized offer that is tailored to your requirements. P.S.: We will also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with both financial and entrepreneurial challenges.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Co., Ltd, controller model: FSCUT 2000C, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: RFL-C3000, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 3 mm, table length: 6,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 6,000 mm, working width: 1,500 mm, working height: 120 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 128 m/min, feed rate Y-axis: 128 m/min, feed rate Z-axis: 30 m/min, cutting speed: 1,20,000 mm/min, positioning speed: 128 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 4,500 kg, total length: 7,500 mm, total width: 2,500 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, CNC Fiber Laser Cutting Machine 6000 × 1500 mm 3000 W – Metal Technics Polska Professional Fiber Laser Cutting Machine The Metal Technics Polska F6000×1500 3000W CNC Fiber Laser Cutting Machine is designed for precision cutting of carbon steel, stainless steel, aluminum, brass, and copper sheets. Equipped with a Raycus 3000 W fiber laser source, WSX auto-focus cutting head, and BOCHU FSCUT 2000C CNC controller with CypCut software, the machine delivers excellent cutting quality, outstanding repeatability, and low operating costs. Its 6000 × 1500 mm working area allows efficient processing of large metal sheets, making it an ideal solution for manufacturers, fabrication workshops, and industrial production facilities. Key Features 6000 × 1500 mm working area Raycus 3000 W Fiber Laser Source WSX Auto-Focus Cutting Head BOCHU FSCUT 2000C Control System with CypCut Software Maximum positioning speed: 128 m/min Positioning accuracy: ±0.03 mm Repeatability: ±0.02 mm Schneider Electric servo drives Japanese THK linear guide rails S&A industrial water chiller Automatic centralized lubrication system Heavy-duty stress-relieved steel frame Designed for continuous 24/7 operation Machine available from stock Technical Specifications Model: F6000×1500 3000W Laser Type: Fiber Laser Laser Source: Raycus RFL-C3000 Laser Power: 3000 W Working Area: 6000 × 1500 mm Laser Wavelength: 1080 nm Cooling Method: Water Cooling Power Supply: 380 V / 50–60 Hz Machine Dimensions: 7500 × 2500 × 1950 mm Maximum Cutting Capacity Material Maximum Recommended Carbon Steel 22 mm 16–18 mm Stainless Steel 10 mm 8–10 mm Aluminum 8 mm 6–8 mm Brass 6 mm 4–6 mm Copper 3 mm 2–3 mm Maximum cutting thickness depends on the material grade, surface quality, and assist gas used. For continuous industrial production, we recommend operating within the suggested thickness range to achieve the highest cutting quality, maximum productivity, and excellent edge finish. Equipment The machine is equipped with a WSX Auto-Focus Cutting Head, Raycus Fiber Laser Source, BOCHU FSCUT 2000C CNC Controller with CypCut Software, THK linear guide rails, Schneider Electric servo drives, S&A industrial chiller, and an automatic lubrication system. Dsdpfjzkq S Nox Am Tjuw Every machine includes installation, operator training, technical support, warranty service, and after-sales assistance provided by Metal Technics Polska specialists. Transport & Contact We organize machine transportation throughout Europe and to countries outside the European Union. Each transport quotation is prepared individually based on the delivery destination and machine configuration. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. If you would like to receive a quotation or learn more about this machine, please contact our sales department. Visit the Metal Technics Polska website to explore our complete range of CNC machines, watch demonstration videos, and discover our latest offers and promotions.

Condition: new, functionality: fully functional, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bochu (FSCUT), controller model: FSCUT 2000 + Tube system, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus RFL-C6000 (6 kW), laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, positioning speed: 120 m/min, workpiece weight (max.): 900 kg, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 8,500 kg, total length: 9,000 mm, total width: 4,500 mm, total height: 2,300 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, Description Fiber laser cutting machine FT62 with 6 kW power designed for cutting sheet metal as well as tubes and profiles. The machine is equipped with a 1500 × 3000 mm working table and a tube cutting module for tubes up to 6000 mm in length. Tube diameter range is Ø20–Ø220 mm and square profiles from 20 × 20 to 220 × 220 mm. The machine uses a Raycus 6 kW laser source, WSX cutting head and FSCUT CNC control system (Bochu). Thanks to Inovance servo drives, precision linear guides and rack drive, the machine ensures positioning accuracy of ±0.03 mm and repeatability of ±0.02 mm. The machine features a full protective enclosure, exchange working table, smoke extraction system, Tongfei 6 kW water chiller and 80 kVA voltage stabilizer. Maximum positioning speed is 120,000 mm/min. Technical specification Parameter Value Model FT62 Laser power 6 kW Laser type Fiber laser Laser source Raycus Cutting head WSX Control system FSCUT (Bochu) Working area 1500 × 3000 mm Max tube length 6000 mm Tube diameter Ø20 – Ø220 mm Square profiles 20 × 20 – 220 × 220 mm X axis travel 3000 mm Y axis travel 1500 mm Positioning speed 120,000 mm/min Positioning accuracy ±0.03 mm Repeatability ±0.02 mm Cooling Tongfei 6 kW chiller Power supply 380 V / 50 Hz Construction full enclosure + exchange table Dust extraction smoke extraction system Voltage stabilizer 80 kVA Certification CE Optional equipment Dodsyvhm Ropfx Am Tsuw Option Price Industrial dust collector 7.5 kW approx. 39,000 PLN Tubest software (tube cutting) approx. 12,200 PLN Cypnest software (nesting) approx. 4,600 PLN Rotary unit left/right change approx. 1500 USD The machine can be configured according to the customer’s requirements. Laser power can be adjusted to individual needs: 3 kW, 6 kW, 12 kW.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC laser cutting machine TruLaser 3030 (L20) 5000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Duedpfszix Upjx Am Tjw Control system: Siemens Sinumerik 840D SL Laser power: 5000 Watt Operating hours: 43,349 hrs Laser beam on: 29,598 hrs Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Closed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit - Automatic pallet changer in the longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Lens with RFID chip Control system - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panes - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment and LensLine with automatic condition monitoring) - CoolLine - Extended pallet infeed - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: repair required (used), functionality: limited functionality, Year of construction: 2007, operating hours: 31,489 h, control type: NC control, degree of automation: semi-automatic, laser type: CO₂ laser, laser hours: 22,804 h, laser power: 4,000 W, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 3,000 mm, AMADA LC3015 X1 NT – Complete Automated Laser Cutting Cell -The AMADA LC3015 X1 NT is a fully automated CNC laser cutting cell designed for efficient, high-volume sheet metal production with minimal operator intervention. -The installation includes the AMADA LC3015 X1 NT laser machine, an AS LUL 300 X1 automated tower system, a 4 kW Mitsubishi ML40CFX CO₂ resonator, a Riedel industrial chiller, and a Donaldson Torit extraction and filtration system. Dodszi Uc Nspfx Am Teuw -Manufactured in Japan in 2007, the machine offers a working area of 3,000 × 1,500 mm and delivers reliable, precision laser cutting performance. -The 4 kW laser is capable of cutting mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. -The automated tower system features eight storage cassettes with a load capacity of 3,000 kg each, enabling automatic material loading, unloading, and pallet exchange for continuous production. -A vacuum sheet handling system further improves productivity by reducing manual material handling. -The Riedel dual-circuit chiller provides efficient cooling for both the laser source and optical components, ensuring stable operation. -The Donaldson Torit filtration system effectively removes fumes and metal particles generated during the cutting process, maintaining a clean and safe working environment. -This complete AMADA/Mitsubishi solution combines automation, reliability, productivity, and integrated cooling and filtration systems, making it an excellent choice for demanding industrial manufacturing applications.

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 1,070 mm, laser power: 60 W, type of cooling: air, warranty duration: 12 months, laser wavelength: 1,070 nm, Equipment: cabin, Laser engraving machine with 60-watt laser power (new) - 60-watt MOPA laser (enables color laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - very easy to operate - switch on and start - Fiber laser source with 60 watts for high-contrast and fast markings with extremely high resolution (see images) - Deep engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g., for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with fastening threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approx. 180 x 180mm Dujdpfxjfkgq No Am Tjw - expandable to approx. 300 x 300mm - incl. foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: good (used), functionality: fully functional, Year of construction: 1999, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes Dsdpfx Aszil Dkjm Tjuw including tool cabinet with tools including Quick-Set

Condition: used, functionality: fully functional, Year of construction: 1998, Punching force: 165 kN Working area: 2070 x 1280 mm Sheet metal thickness: 6.4 mm Control system: CC 220 Workpiece weight: 150 kg Punching diameter: 76.2 mm Dsdpfozilz Aox Am Tjuw X-axis: 80 m/min Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer Dedpfx Amog I H Ikj Touw The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics 20kW Table size - 3000x1500mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 autofocus head Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 5760kg X/Y positioning accuracy - ±0.05 mm/m Duedpfxjwnpzte Am Tew X/Y repeatable positioning accuracy - ±0.03 mm/m Maximum traverse speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 Power supply - 380V 50Hz three-phase

Condition: new, Sample configuration: 2x 12m worktable 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis FSCUT 9200 system Dsdjwxvl Tjpfx Am Touw HL-20000 water chiller Yaskawa servomotor Optional: air compressor

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 3000x1500mm Control - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 autofocus head Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 5760kg Laser power - 12,000 W X/Y positioning accuracy - ±0.05 mm/m Dusdpewnpmcefx Am Tow X/Y repeat positioning accuracy - ±0.03 mm/m Maximum traverse speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 Power supply - 380V 50Hz three-phase

Condition: new, Year of construction: 2023, Laser source: Raycus 3 to 6kW Laser head: Raytools autofocus Structure: 2 horizontal chucks Loading: 6.5m unloading 2.5m Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-230mm Tube profiles: round, rectangular, square Options: - 3 D swivel head Dedpfx Amonkailj Teuw - Automatic bundle loader - Table loader - Conveyor unloader - Weld seam detection - Raybox - Extraction system

Condition: new, functionality: fully functional, control type: CNC control, Laser power - 6 kW Laser source - MAX Photonics CNC control - FSCUT3000 EtherCAT-BUS Duodswnq T Rspfx Am Tew Software - CAD/CAM: Tubest, Tube Pro Processing area: Diameter - 15-240 mm Loading - 100-6000 mm Unloading - 100-3000 mm Load capacity - up to 300 kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m

Condition: new, Year of construction: 2024, Basic configuration Laser source: Raycus Dedpfx Amomx R S Ne Teuw Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Loading: manual Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Smoke extractor: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm tube length: 0-4000/0-6000mm Maschinengröße: 13500x3400x2400mm

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Duedpfx Aoi Ar Ruom Tsw Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1500 kg

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Djdpfxjci Ik Sj Am Tjuw Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Dujdpfx Ajx Eh Drem Tew Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 2726

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Control panel: Bruderer touchscreen HMI Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Dusdpfx Amezil Tro Tew Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Dsdszil S Ijpfx Am Tsuw Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz