Used Laura Pipe Bender for sale (3,571)

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Bwodpfjxf Utasx Abzow Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz Bsdpfxsndz Npe Abzjww combination machine ja extensive accessories ca. 50 Sätze pressure 50 t

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table Bjdpjxn Tydjfx Abzsww - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Year of construction: 2000, condition: used, Muhr and Bender KLS 1100 Punching capacity 110 clay Diameter x sheet thickness Ø 40 in 22 mm throat 500 mm Max. hole diameter Bwsdpfslzc Dcsx Abzsw 80 mm Maximum cutout thickness 22 mm Knife length 500 mm Max material thickness by notching 16 mm Motor power 8 kW Weight 5500 kg

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm Bedpfxsu Id Ruo Abzsww rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - max. material thickness at 40 kg/mm² strength approx. 3 mm Bedpohrm Iusfx Abzsww - shaft reception 45 mm - manual hydraulic feed of the top roller - E. foot switch - drive 400 V / 1,1 kW - space requirement approx. W 550 x H 1200 x D 1200 mm - weight approx. 180 kg

Condition: new, Year of construction: 2025, laser power: 1,500 W, pipe diameter (max.): 6,000 mm, pipe length (max.): 6,000 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Glorystar Laser ALL NEW Tube Laser Machine | VS6008G | 1.5KW Bodpov Dutzjfx Abzjww (Nur für deutschen Preis!!!) 1.5KW Laser Source Cutting Head Glorystar Servo motor Inovance Screw rod Standard Guide rail Standard Chuck Standard High-speed flexible cable IGUS Electrical control Schneider automatic loading system (standard) Round tube ≤Φ87mm Square tube ≤60mm*60mm Rectangular tube diagonal ≤87mm

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Bwjdovvx E Sepfx Abzow weight of the machine ca. 1 t

Condition: used, Year of construction: 2004, punching pressure 40.0 t square edge steel 28.0 mm L-beam 80 x 8.0 mm round bar steel 30,0 mm punch diameter 30 in 10 mm square material 28 x 28 mm shear: flat material 150 x 10 oder 100 x 15 mm adjustment of stroke 35.0 mm strokes per minute max. 24 H/min. voltage 400 V weight 1020 kg dimensions 910 x 670 x 1930 mm Bodpfjxau Uajx Abzsww from a maintenance workshop well-maintained condition (!!) Equipment: - electro-hydraulic profile steel shears - punching station, flat steel shears, angle steel shears, profile steel shears - stepless adjustment of the stroke - very compact design - support table at the notching and punching station - various MUBEA punches + dies - flat steel station with manual material hold-down device - protective devices at work stations - 1x freely movable foot switch - operating instructions (PDF)

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors Bwedpfsfkmr Sex Abzew (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Bwjdpsu Ickysfx Abzew Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm Bwedpfx Asvdidujbzow - throat depth 610 mm - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Bedpsv D T H Tefx Abzoww Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: used, mileage: 1,001 km, gearing type: other, color: orange, first registration: 01/1999, Year of construction: 1999, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, driver cabin: other, Vehicle location: Bovenden, steel superstructure, flap Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bjdpfx Asvhig Rebzjww - .

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l Bwedpfx Aboxaaipszsw work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Bwjdpfencc Huox Abzjw Dimensions: 200x75x197 cm LxWxH

Condition: reconditioned (used), punching force: 100 t, sheet thickness steel (max.): 40 mm, Mubea / Muhr and Bender hole punching machine VP1000 - Hydraulic hole punch with CNC coordinate table - 5-punch tool with quick-change system and automatic punch selection - Punching force: 100 tons - Throat: 620 mm - Stroke: 60 mm - Punches up to: Ø 40 in 20 mm Ø 10 in 30 mm Bwodovl Hx Eopfx Abzsw - Max. plate size: 1200 x 750 mm - Max. plate thickness: 40 mm - Travel speed 21 m/min Special tools and devices on request. Trade-in of used machines. Delivery possible throughout Europe.

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. Bedpfxowwzudj Abzoww With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Bsdpfeqfgy Hex Abzoww Trade-in of used machines. Europe-wide delivery possible.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G SERIES HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Model:G-12 Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm Bwedpfx Abeuc Sifozew The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Bwedpfxsium Eue Abzjw Trade-in of used machines. Europe-wide delivery possible.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Bedpfx Abjwwqvwjzeww

Condition: excellent (used), Year of construction: 2008, operating hours: 500 h, functionality: unexamined, machine/vehicle number: CV0604, pipe diameter (max.): 1,400 mm, Equipment: CE marking, Incremental HOT Pipe Induction Bending Machine – Cojafex (Netherlands) | 2008 Make: Cojafex (OEM, Netherlands) Model: Incremental HOT Pipe Induction Bending Machine Year of Manufacture: 2008 Condition: Almost unused – only 198 pipes bent Bwjdew Igr Iopfx Abzew Location: India (Currently dismantled & ready for transport) Availability: Immediate Price: Euro 1.5 Million Key Features: Original OEM Make – Cojafex, Netherlands, global leader in pipe induction bending technology Incremental hot pipe bending for high-precision industrial applications Suitable for bending large-diameter and 100 MM thick-walled pipes of Dia 1400 MM Machine is almost unused – only 198 pipes bent Ideal for oil & gas, energy, heavy engineering, and infrastructure sectors Condition & Readiness: Machine is dismantled, stored securely in India Can be inspected upon request OEM (Cojafex) ready to commission and install the machine on-site under a separate contract Logistics: Can be shipped internationally Crating and loading support available All original documentation available Serious Buyers Only: Inquiries welcome. Please contact us for detailed specifications, photos, and pricing.

Year of construction: 2019, condition: used, Pipe bending machine DW75NC Europe Design Semi Automatic with Measurements Panels Pipe Bender. The DW75 semi-automatic pipe bending machines are easy to operate, robustly constructed, and achieve excellent bending results. The NC program precisely controls the bend angle (Y-axis) and rotation (Z-axis). The distance between the bends (X-axis) is configured using easily adjustable and very precise mechanical stops. Entering a new bending program is very intuitive with the help of an industrial touch controller and the accurate and user-friendly software. The DW75 semiautomatic pipe bender is by far the most efficient machine in its class to minimize energy consumption. BLMA as top 10 tube bending manufacturers offer a wide assortment of 5- Axes NC tube bending machine. The DW75 semi-automatic tube bender is fabricated from the finest quality of raw materials to provide maximum durability and long service life. Used in various industrial uses, these are highly acknowledged for Its specific design, precision, and standard performance. Main specification Max bending capacity: ¢75mm x 5mm Bwjdpfx Aei Ewy Tobzjw Max bending radius: R400mm Bending degree: 0-190° Max effective distance of mandrel: 2800mm Motor power: 7.5Kw Max hydraulic pressure 12Mpa Oil tank capability 250L Measurement: 400 x 100 x 110cm Weight of machine: 2000kg

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler Bwsdpfxoxircgs Abzow CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950