Used Lawn Drag for sale (226)

Condition: used, mileage: 519 km, power: 28 kW (38.07 HP), first registration: 07/2017, fuel type: diesel, overall weight: 2,400 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 519 h, Equipment: air conditioning, all wheel drive, cabin, road-legal, 1st hand, HU/AU new, diesel all-wheel first registration 10.07.2017 519 operating hours 28 kW air conditioning cabin lawn tires hydrostat front and rear hydraulics comfort seat road-legal 1st hand permissible total weight 2,400 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Nodovic Dfopfx Airswn

Condition: used, mileage: 519 km, power: 28 kW (38.07 HP), first registration: 07/2017, fuel type: diesel, overall weight: 2,400 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 519 h, Equipment: air conditioning, all wheel drive, cabin, Road-legal, 1st hand, HU/AU new, diesel all-wheel first registration 10.07.2017 519 operating hours 28 kW air conditioning cab lawn tires hydrostat front and rear hydraulics comfort seat road-legal 1st hand permissible total weight 2,400 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Njdjvicw Ejpfx Airswn

Condition: used, Year of construction: 2000, Container heating system, gas-fired heater Ygnis, heating unit, large boiler from Bösch, LR 2150, rated output 2150 kW, year of manufacture 2000, max. supply temperature 110°C, max. operating pressure 6 bar, water content of the heat exchanger 2710 l, unfortunately, the nameplate of the gas boiler cannot be found. Includes control system Includes water expansion tank Includes boiler pump Includes network pumps Includes gas burner Includes chimney system Includes double container with chimney system Dimensions of double container: Length 8 m (without chimney) Overall width 6 m The containers can be separated if the width is 3 m External height: 2.98 m Nwodpjvgcwmefx Airon Internal height inside the container: 2.76 m The system has very few operating hours, as it was only used as a lawn heating system for the football field! Immediately ready for use and everything is functional! There are still pallets with paper towels in the container, which are currently stored there. However, these will be removed.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: Z00004955, input voltage: 400 V, Equipment: documentation/manual, Professional essential oil and hydrosol extractor manufactured by Albrigi Luigi S.r.l., model DRAGO PRO 250L. This machine is designed for steam distillation of medicinal plants, aromatic herbs, flowers, and plant-based raw materials. The unit is in excellent condition, fully functional, used very little, and carefully maintained. Key technical specifications: Manufacturer: Albrigi Luigi S.r.l. Model: DRAGO PRO 250L Type: essential oil extractor / steam distillation unit Nwedpsy S A S Tjfx Airen Capacity: 150–250 liters Year of manufacture: 2019 Power supply: 380/400 V Phases: 3 phases Frequency: 50/60 Hz Power: approximately 18.75 / 19 kW Structure: stainless steel Machine on wheels User and maintenance manual available CE marking present CAREL humiSteam x-plus system visible on board the machine Machine condition The machinery is in very good overall condition, fully functional, and used very little. Stored in a suitable environment. It shows normal aesthetic signs of use, without affecting its functionality. Reason for sale Sale due to disuse following a change in the production line. Available for viewing by appointment. Additional photos, videos, and technical documentation are available upon request. Sold with a valid invoice.

Condition: used, functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS20, 1 ABUS LW wall-mounted slewing crane 250 kg load capacity / lifting capacity Jib length 3m + 0.6m extension (removable), 250kg load capacity With Abus Hitachi chain hoist, load capacity 250kg Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable drag, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim Nwsdpfoywfhujx Airen System is completely dismantled and immediately available Shipping by freight forwarder or pickup Please inquire about shipping costs by postal code

Condition: used, mileage: 98,103 km, power: 90 kW (122.37 HP), first registration: 08/2019, fuel type: diesel, overall weight: 2,375 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M484----4 X VW CADDY WITH SHELVING SYSTEMS, WITH IDENTICAL EQUIPMENT, BUT DIFFERENT MILEAGES AVAILABLE ----VW CADDY 2.0 TDI EURO 6d-TEMP----MILEAGE: 98,103 KM, SERVICE BOOK MAINTAINED LAST INSPECTION WITH OIL CHANGE PERFORMED ON 27.03.2025 AT 97,808 KM THE VEHICLE HISTORY IS AVAILABLE IN DIGITAL FORMAT. ALL INSPECTIONS WERE CARRIED OUT BY AN AUTHORIZED MANUFACTURER'S WORKSHOP. 1ST OWNER----4 MOTION (ALL-WHEEL DRIVE)----LIKE-NEW M+S TIRES----2 SEATER ----* CRUISE CONTROL * SPEED LIMITER Nodpfx Aew Nu Duoirjwn * SPEED RESTRICTOR * HILL START ASSIST * BRAKE ASSIST * MULTI-COLLISION BRAKE * REAR PARKING ASSISTANCE (PDC) * DRIVER FATIGUE DETECTION * AIR CONDITIONING * START/STOP AUTOMATIC SYSTEM ----TOW HITCH TOWING CAPACITY UP TO MAX. 1450 KG----CORNERING LIGHT ----FOG LIGHTS----TRENDLINE----GAS BOTTLE TRANSPORT VENTILATION ----SORTIMO WOOD FLOOR WITH EYELETS----VEHICLE FIT-OUT BY SORTIMO GLOBALSYSTEM WITH DRAWERS AND SHELVES 7 DRAWERS 4 DRAWERS, EACH 45 X 40 CM 3 DRAWERS, EACH 65 X 35 CM 1 DRAWER, 45 X 65 CM 3 SHELVES 1 SHELF, 35 X 70 CM 1 SHELF, 45 X 35 CM 1 SHELF, 35 X 120 CM 6 X SCREW BOXES BROOM AND SHOVEL HOLDER----ROOF RACK BY SORTIMO TOPSYSTEM----FIRE EXTINGUISHER----* BLUETOOTH HANDS-FREE SYSTEM * USB * AUX * SD CARD * CENTRAL LOCKING WITH 2 REMOTE KEYS * ELECTRIC EXTERIOR MIRRORS+HEATED * ELECTRIC WINDOW LIFTERS * LUMBAR SUPPORT * SLIDING DOOR RIGHT, GLAZED * REAR DOORS, GLAZED * PARTITION WALL, GLAZED * HEATED REAR WINDOW * LED CAB/CARGO AREA LIGHTING * STORAGE COMPARTMENT IN THE CAB ----Special equipment: * Audio system Composition Audio (monochrome display, SD card interface, AUX-IN) * Exterior mirrors * Design: Commercial vehicle * Connectivity package * Rear parking assistance * Remote control (2) * Rear tailgate with glazing * Heated rear window * High cargo area partition with window * Tire pressure monitoring indicator * Heated windshield washer nozzles * Fixed side window in the cargo/passenger compartment, front right * Seat cover / Upholstery: Robust seat covers * Underrun protection for drive unit (engine and transmission) Additional equipment: * 3rd brake light * Airbag passenger side * Airbag driver side * Anti-Slip Regulation (ASR) * Equipment package: BlueMotion Technology * Exterior mirror, left, aspherical * Exterior mirror, electrically adjustable and heated * Exterior mirror, right, convex * BlueMotion Technology * Brake assistant * Roof rack preparation * Electronic differential lock * Hill-start assistant * Multi-collision brake * Driver fatigue detection * Windshield, laminated glass, tinted * Body/structure: Box van * Lumbar support, front left seat * Steering wheel (3 spokes) * Steering column (steering wheel) mechanically adjustable * Commercial vehicle registration * Engine 2.0 liter - 90 kW TDI * Engine drag torque control (MSR) * Multifunction display Plus * Non-smoker package * Payload standard * Wheelbase 3006 mm * Tire repair kit (Tire Mobility Set) * Low emission according to exhaust standard Euro 6d-TEMP * Sliding door, right * Drawer/storage compartment under front seats * SCR system (AdBlue technology) * Side airbags in front with head airbag unit * Seat belts in front with height-adjustable belt tensioners * Steel rims 6x15 * Start/Stop system * Trendline * Door handles outside in vehicle color * First aid kit and warning triangle ----++ Exclusive promotion at Autohaus Mat GmbH: Up to €1,000 trade-in bonus? Your advantage for changing vehicles! (only valid for commercial ve

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) Nwsdpfx Aevpalasiren ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, mileage: 1 km, power: 12 kW (16.32 HP), first registration: 01/2004, fuel type: gasoline, color: red, driver cabin: other, gearing type: other, Vehicle location: Bovenden, superstructure: lawn tractor 2 cylinder engine, cutting width: 1020mm, incl. accessories : snow blade, 2x mowing rotors, snow chains, 1x grass catcher, 1x salt spreader, 1x lawn aerator ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nedpfxjvhg N No Airewn - .

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS Nwjdpfx Aioyhrnuoron DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 810 mm, number of axes: 8, This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a twin-spindle design with a maximum Z-axis travel of 810 mm and X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, suitable for complex multi-process turning and milling operations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill centre we have for sale. Contact us for further details. • Control/NC • Control unit: MORI SEIKI MSX-701 • NC system: FANUC FS-31iA (MAPPS 3); MAPPS version: 3 • Software/features: Load monitor; Tool life management; Number of stored programs: 250; User memory: 50 MB; Tool offset pairs: 99; Custom macro variables: 600 • Languages: NC and MAPPS screens in Italian • Electricals/destination • Voltage: 380–480 V; Frequency: 50 Hz; Destination: Europe • Machine configuration • Bed length: 800 mm • C-axis on both spindles • 2 turrets with X-Y-Z axes • Both turrets originally equipped with live tooling • Lower turret live tooling currently NOT working (turning functions OK) • Suitable for complex multi-process turning and milling • Spindles • Main spindle (Spindle 1) • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Sub spindle (Spindle 2) • Power: 25/22 kW; Speed: 5,000 rpm • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Axis travels • B: 810 mm • Max. distance between spindle noses: 1,130 mm • Turrets • Turret 1: Axes X-Y-Z; 16 stations; Milling function included; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Turret 2: Axes X-Y-Z; 16 stations; Milling function present but NOT working; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Backward tool max lengths: 155 mm (upper turret), 100 mm (lower turret) • Tool presetting • Spindle 1 in-machine tool presetter: Manual (detachable) Nedpfezbkh Tox Airswn • Spindle 2 in-machine tool presetter: Manual (detachable) • Coolant/chip (machine-integrated) • High-pressure coolant system: 635 W / 1040 W • Coolant type: Water-soluble • Through-spindle air blow: Included • Chip disposal direction: Right • Interfaces • Bar feeder interface: Included (Multiple-bar feeder specification; LNS) • Robot interface: Included • Languages/documentation • Manuals: Italian • Documentation: Installation, Operation, Maintenance manuals; Declaration of Conformity; CE Certificate • Important note • Lower turret motorized tooling function faulty on both machines. T2 turret currently usable only for turning operations. Additional equipment • Automation/handling • RR Robotica loading portal (included) • Loading pallets (included) • Work loader (Spindle 2 side) • Workpiece ejector • Work unloading conveyor • Part receiver • Custom upper door hatch for portal loading/unloading (non-original) • Chip/coolant peripherals • Drag-type chip conveyor • Coolant tank with washing pumps • Additional non-original 20 bar high-pressure pump • Workholding and tooling • Main spindle and sub spindle chucks included (KITAGAWA 8" hollow) • Fixed tool holders: 8 total (4 upper + 4 lower) • Driven tool holders: 2 axial, 2 radial • Electrical/other • External machine transformer • Signal light tower: 3-tier (red / milky white / green)

Year of construction: 2006, condition: good (used), machine/vehicle number: WIZ, Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails External dimensions of steel construction (space required) 13.2 x 5.5m Height of steel construction 4.85 m, UK steel construction 4.65 m UK runway crane 4.4m, UK bridge 4m, hook height 3.8m Support spacing 4 + 4 + 4.9m The system is delivered complete: KBK rails, rail connectors Undercarriages, end plates, drag cables, holders/hangers, etc + complete steel construction (HEA180) incl. Demag DC 500KG chain hoist Crane is dismantled and available immediately Item location is 75053 Gondelsheim Good condition, see pictures (contaminated by oil mist - can be easily cleaned) Dispatch by forwarding agent or pick-up only by appointment Nsdpfx Ajiwdaqeirjwn Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Description Control system: Fanuc 21i-T Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Tool holder: VDI 40 Workpiece feed: Workpiece circulation belt with drag frame. Nwedpfjtq Tnuox Airon Chip conveyor: Hinged belt conveyor.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Nedpfx Aeruakgsirjwn Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Year of construction: 2014, condition: like new (used), machine/vehicle number: 20020235 UG, DEMAG ALU crane canopy Crane runway dimensions approx. 6x4m Payload / lifting capacity 250 KG - 0,25to Technical data of the system: Crane runway made of Demag aluminum rails 180mm with internal power supply System is supplied complete: Rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. incl. Demag DCS PRO2-250 NL 250KG chain hoist - lifting speed 0-16m / min !!! Demag DCS chain hoist 250KG (NEW PRICE 4700 Euro !) Can also be exchanged for a standard model DK2-250 to reduce costs - please inquire ! NEW CONDITION - installed in clean room ! Crane is disassembled and immediately available Mint condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Nodpoty S A Nsfx Airown Demag KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TH2000MessraumRES, DEMAG KBK Crane System Overhead Crane Runway 9.3 x 5.3 m (Bridge travelling path approx. 5 m) The crane is also available in various other dimensions, multiple units in stock with elevated carriages. Load capacity / Lifting capacity: 500 KG Technical data of the system: Crane runway made from Demag KBK2 profiles with elevated carriage – crane girder is located between both running rails for maximum lifting height with internal power supply !! System is delivered complete: KBK profiles, profile connectors, carriages, end plates, drag chain (internal conductor rail system optional!) brackets/suspension elements etc. including Demag DK chain hoist, capacity 500 KG Crane is dismantled and immediately available Various cranes in stock Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarding or collection by prior arrangement only Demag KBK1, KBK2 and KBK3 profiles in stock! Other KBK systems with different capacities also available. Load capacities from 125 KG to 1600 KG Njdpsv Iai Nefx Airswn Please request your required crane runway with load capacity and dimensions without obligation.

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Nwedpfxjrhzh Sj Airsn Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 250 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DVK System Master 1 RE was manufactured in 2020. It features a robust working area with X-axis travel of 250 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine is equipped with a powerful 25 kW spindle and an automatic tool changer with a capacity of 32 tools. If you are looking to get high-quality machining capabilities, consider the DVK System Master 1 RE horizontal machining centre we have for sale. Contact us for further details. • CNC control: FANUC CNC with 10.4" colour operator panel, PLC, Ethernet connectivity, dedicated machine software • CE certified • Working area: • Birotational clamping vise axes: A-axis 360° continuous, B-axis 360° continuous • Spindle: • Type: OMLAT electrospindle • Torque: 80 Nm • Tool interface: HSK-A63 • Tool magazine/ATC: • Automatic tool changer • Max tool diameter: 70 mm (150 mm with adjacent pockets free) • Random tool selection • Clamping system: • Self-centering birotational hydraulic vise • Jaw stroke: 50 mm • Clamping force: 5,000–30,000 N • Cooling & lubrication and services: • Liquid-cooled spindle • Centralized automatic grease lubrication • Pneumatic system • Hydraulic system Njdpfx Ajzp Hndeirjwn • Air-water heat exchanger • Machine pressurization system • Machine data: • Installed power: 55 kW • Supply voltage: 400 V / 50 Hz Additional equipment • Robot automation: • FANUC M20iA/20M anthropomorphic robot, 6 axes, 20 kg payload • Schunk PGN125 two-jaw gripper • Pallet system: • Two vertical pallet magazines • Pallet size: 480 × 300 mm • 54 pallet positions per magazine (standard) • Chip/coolant and extraction: • Internal coolant through spindle • 60 µm cartridge filter • MAHLE self-cleaning 60 µm filter • Rain-type work area washing system • Chip conveyor with drag chain and rotofilter • Coolant chiller • Oil mist extraction system • Measurement, monitoring and accuracy: • Marposs 3D radio probe • Laser tool presetter • Thermal compensation on X, Y and Z axes • Optical scales on X, Y and Z axes • Tool life monitoring • Extended work coordinate system (48 additional offsets) • Artificial vision system with 2 cameras • Clamping enhancement: • Pressure-controlled hydraulic clamping • Included auxiliary equipment: • Bonfiglio MROTOS 8555 4 E LRSA industrial parts washer, robot integrated • Automator ADP5090 dot peen marking system with AC500 controller, robot integrated: • Marking area: 50 × 90 mm • Pneumatic marking head • Connectivity: Ethernet / USB / RS232 / RS485 • Touch-screen AC500 controller • Marking speed up to 10 characters/second • Additional Machine Information: • The machine has recently been fully serviced/revised by the manufacturer. • The spindle was also included in the recent manufacturer service. • The machine has always been used for machining aluminium. • The machine is currently not in production due to a change in the type of parts being manufactured.

Condition: ready for operation (used), * Brand: Nordberg-Dragon * Type: 25/60-3.5 * Surface: 6000 mm x 2500 mm – 3,5 decks * Upper deck: screen opening [] 30 mm * Middle deck: screen opening [] 17 mm * Middle deck: screen opening [] 10 mm * Lower deck: screen opening [] 5 mm * Driving: 30 kW E-motor Nodpoywmmfjfx Airswn

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 140 To./h fully mobile asphalt mixing plant - year: Neu - capacity: 140 To./h - cold feeder: 3x 6m³ - dryer drum - drag elevator to load asphalt onto the trucks - dust collector Dry system with Nomex sleeves filters ; filter space 370m² - mixer Body in carbon steel plate structure, with heating cabinet by thermal oil, internal coating system anti-wear, sealing caps and Nsdpoyi Hmbsfx Airewn inspection - control room with fully automatic software and manual mixing desktop - Mobile Tank 60.000L (40.000L bitumen / 20.000L fuel) available for extra price

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, stack height: 100 mm, overall weight: 350 kg, total width: 810 mm, total height: 1,060 mm, total length: 2,540 mm, input voltage: 220 V, input frequency: 50 Hz, PFi Blade B3+ Specifications: Working area: 210 x 297 mm - 400 x 600 mm Grammage: 120 - 400 g/m² (depending on tooling) Cutting thickness: up to 1.3 mm Nwsdpfx Aowlhbajirsn Cutting speed: up to 800 mm/second Cutting tolerance: +/- 0.3 mm Blade material: Tungsten steel Feeder: Stack feeder with 5 combined lifting and dragging suction cups Feeder capacity: 100 mm Control systems: CCD camera Power supply: 220 V, 50 Hz, 20 A, 4 kW Dimensions (L x W x H): 2,540 x 810 x 1,060 mm Weight: 350 kg The machine has been overhauled in our workshop and serviced according to the manufacturer's specifications. The warranty is 6 months. The machine is available from the Renningen warehouse near Stuttgart. Optional shipping within Germany is negotiable. On-site installation and training (within Germany) are negotiable. A maintenance contract is available.

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Nwjdpfx Aieu Nu I Tjrsn Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Nwsdpfx Aijty Swyjren Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only Nwsdpfx Aiety Swteron

Condition: like new (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, machine/vehicle number: EQWCR/SR, arm reach: 1,434 mm, type of input current: AC, overall weight: 12 kg, input voltage: 48 V, Robotic Welding Solutions, Automatic welding solutions. Product Overview: EQ Series High-Performance Collaborative Robots This series features four primary models rebranded for precision and industrial excellence: the EQCR-7, EQCR-12, EQSR-3, and EQSR-4. These 6-axis collaborative robots are engineered to handle various industrial tasks with high repeatability and advanced safety features. Key Specifications & Performance The robots are categorized by their payload capacity and working radius: Payload & Reach: * EQCR-12: The heavy-duty model with a 12kg payload and 1434mm reach.EQCR-7: A balanced model with a 7kg payload and 988mm reach.EQSR-4: A versatile option with a 5kg payload and 919mm reach.EQSR-3: A compact solution with a 3kg payload and 705mm reach. Precision: These models offer exceptional repeatability, with the EQCR-7 achieving $\pm$0.02 mm and the other models at $\pm$0.03 mm. Sensing: Equipped with integrated force/torque sensing (x-y-z) at the tool flange for delicate and precise operations. Movement and Speed Degrees of Freedom: 6 axes. Nsdpfxovl Ewmo Airown Joint Range: Most axes offer a full $\pm$360° rotation, providing maximum flexibility in tight spaces. TCP Speed: Maximum tool-end speeds range from 1.5m/s (EQSR-3) up to 3.2m/s (EQCR-7).Physical & Environmental Ratings Protection Level: The EQCR series boasts an IP67 rating (dust-tight and water-resistant), while the EQSR series is rated at IP54.Cleanroom Standard: All models are compliant with ISO Class 5 cleanroom environments. Operating Conditions: Designed to work in temperatures from 0°C to 50°C with up to 93% relative humidity. Control Cabinet The series is supported by the MCC control cabinet, featuring: Safety Standards: Certified to EN ISO 13849-1 (PL d, Cat. 3) with 21 integrated safety functions. Connectivity: Supports RS232, RS485, Gigabit Ethernet, USB 3.0, HDMI, and EtherCAT. User Interface: Supports "Drag-to-Teach" programming and a graphical user interface for easy deployment.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format Nsdpfx Aox D Nl Isirown • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English