Used Lead Cartridge for sale (2,024)

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Kfjdpfet Ipi Isx Aanja Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Kfsdpfx Aaovgmbvenoa Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: good (used), Year of construction: 2008, Lead and feed screw lathe OPTIMUM D560x1500 - CE certification - Year of manufacture: 2008 - 3-axis digital readout - Center height: 280 mm - Swing over bed: 560 mm - Swing over cross slide: 355 mm Kjdpfox I Ni Dex Aanofa - Swing in the gap: 790 mm - Distance between centers: 1500 mm - Spindle bore: 55 mm - Speed range / gearbox: 25 - 1600 rpm - Feed rates / longitudinal: 0.059 - 1.646 mm/rev - Feed rates / cross: 0.02 - 0.537 mm/rev - Tailstock MT5 / quill travel: 180 mm - 3-jaw chuck: 300 mm + reversible jaws - Quick-change toolholder with inserts - Coolant system - Drive power: 7.5 kW - Documentation Dimensions (LxWxH): 3 x 1.4 x 1.7 meters / Weight: 2300 kg Subject to errors and input mistakes.

Condition: good (used), WEILER COMMODOR B Lathe Year: 1987 with HEIDENHAIN 3-Axis Digital Readout Center Height: 190 mm Distance Between Centers: 950 mm Swing Over Cross Slide: 190 mm Spindle Bore: 56 mm Spindle Speeds: 25–2,000 rpm Number of Speed Steps: 18 Motor Power: 2/4 kW Longitudinal Feeds: 0.022–0.8 mm/rev Transverse Feeds: 0.011–0.4 mm/rev Number of Feed Rates: 200 Metric Thread Pitches: 0.3–10 mm Weight: approx. 1,500 kg Dimensions: 2,350 x 1,000 x 1,450 mm Ksdpfsxz Rc Nsx Aansfa Technical data without obligation! This machine is ideal for users requiring a large spindle bore. Accessories / Equipment: - 3-axis digital readout HEIDENHAIN - Independently adjustable faceplate - Electrically interlocked chuck guard - Multifix tool post, size “B” - Machine lamp - Coolant system - Rear chip guard panel - 2 emergency stop buttons - Bed stop - Fixed steady rest (as new) - Travelling steady rest (as new) - 3-jaw chuck Röhm - Live center - Fixed center - Carrier plate - Clamping plate Available from March 2026 from vocational training center "Due to its quality and price, the machine is not suitable for private individuals." Condition: Good to very good

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Weiler Praktikant GSD Precision Lead and Feed Screw Lathe with 3-Axis Heidenhain ND 780 Digital Readout, As-New Condition, Year of Manufacture: 2017 Technical Data: - Year of manufacture: 2017, Machine No. MK10 - Center height: 160 mm - Swing over bed: 320 mm - Swing over cross slide: 190 mm - Distance between centers: 650 mm - Spindle speeds: 16 steps, from 48 to 2500 rpm - Spindle bore: 43 mm - Short taper spindle nose: DIN 55027 size 5 with bayonet lock - Tailstock: Morse Taper 3 - Longitudinal feeds: from 0.02 to 0.63 mm/rev - Cross feeds: from 0.006 to 0.2 mm/rev - Thread cutting: metric, inch, module, and diametral pitch threads possible Kfsdpex Aiycofx Aanja - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 1,050 kg - Spindle brake - Dimensions: approx. 1.72 m length, 1.7 m height, 0.89 m depth Accessories and Features: - Heidenhain ND780 digital readout - New collet chuck set, NEW collets from 3 to 26 mm - Schunk 160 mm 3-jaw chuck with 1 set of reversible jaws (wedge bar system) - Multifix size A with 3 tool holders - 1 bed stop - Splash guard - Coolant system - Machine lamp - Operating manual, spare parts diagram Safety Features: - Lockable main switch - Emergency-stop push button - Electrically monitored chuck guard - Automatic disengagement of the respective handwheel when feed is engaged About the Machine: Offered is a Weiler Praktikant GSD Precision Lead and Feed Screw Lathe with a 3-axis digital readout ND780. Year of manufacture: 2017, in as-new condition with original paint finish. The machine is, of course, fully functional and is supplied with a new set of collets. Previously used in a government facility and only rarely operated. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Condition: used, Year of construction: 2013, Lathe, used Manufacturer: WEILER Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over support: 245 mm Ksdpfxjx I S I Ns Aanofa Center distance: 1,500 mm Speed range: 20 - 2,000 rpm (2 ranges, infinitely variable) Spindle bore: 52 mm Equipment: - Infinitely variable speed control - HEIDENHAIN 3-axis digital readout - Multifix toolpost + 10 tool holders - 3-jaw chuck RÖHM DURO - 4-jaw chuck RÖHM - Collet chuck Fahrion + approx. 33 collets - Fixed and travelling steady rests - Various live/dead centers + drill chuck (see photos) - Coolant system - Documentation The machine was used in-house by a manufacturer of automation technology for their own products. The machine has been tested for basic functions; everything worked except for the spindle brake.

Condition: good (used), Year of construction: 1970, LZ-Lathe Fabr.SCHAERER Type:UD500 Year 1970 overhauled 1991 With Forkadt chuck 315mm tool holder Multifix size C. Center height : 250 mm Center width : 1500 mm spindle bore: 65 mm Spindle speed : 18 - 900 rpm. Machine in good condition . Ksdeu Rdurjpfx Aansfa

Condition: excellent (used), Year of construction: 1995, Digital display Turning diameter 120 mm Kfodpswhrg Sjfx Aanea Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Condition: good (used), Year of construction: 1970, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 68 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, power: 11 kW (14.96 HP), Tailstock holder MK5 Chuck Steel holder Kodpfor Ikq Tox Aanefa Weight 3500kg Loading and delivery is no problem

Condition: good (used), Year of construction: 1980, Center height: 130 mm Swing over bed: 260 mm Swing over cross slide: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 Size 5 Drehdurchmesser über Support: 140 mm (repeated, omitted for English) Spindle speed range: 35.5 - 3150 rpm Feed range, longitudinal: 0.04 – 0.4 mm/rev Feed range, cross: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 - 36 pitch Tailstock taper: MT 4 Kfodsxz Rfkepfx Aansa Drive power: 3 kW Dimensions (L x W x H): 2140 x 850 x 1400 mm Weight: 1100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change toolpost system “Multifix” Size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake linings and gearbox newly mounted Delivery time: approx. 2-3 weeks Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: refurbished (used), functionality: fully functional, overall weight: 939 kg, total height: 785 mm, total length: 1,025 mm, total width: 355 mm, battery capacity: 620 Ah, battery voltage: 48 V, remaining battery capacity: 89 %, battery manufacturer: AIM, battery model: 48V 4PzS620, Forklift battery 48V 4PzS620 Battery 89% TESTED Year of manufacture: unknown Dimensions (LxWxH): 1225mm x 355mm x 785mm Weight: 939kg Ksdpfox Hi Rlox Aanofa Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 552/620 Ah battery Remaining capacity: 89% With Aquamatik filling system (BFS) Supplied with pole screws but WITHOUT end cable

Condition: used, Year of construction: 1991, Compact separator with cartridge filter Manufacturer: Keller Lufttechnik Model: Uni-Star FV Year of manufacture: 1991 Kfedpfx Ajwkwknjansa For dust extraction Motor power: 3.3 kW 161225ä

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. Kfodpfjvkuausx Aanja For further information see data sheets.

Condition: excellent (used), Year of construction: 2006, Centre height: 160 mm Centre distance: 650 mm Spindle speed: 2,500 min-1 Kfedpjw Sn Irofx Aanoa Multifix Tailstock Accessories

Condition: good (used), Scope as per image. Infinitely variable speed up to 3,000 rpm. Kfjdpjx Hfffefx Aanja

Condition: excellent (used), Weiler Ergodor lathe Max. Turning diameter over bed: approx. 320 mm Max. Turning diameter over support: approx. 160 mm Max. Turning length: approx. 470 mm Bar passage: approx. 36 mm Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Kfjdpfx Aajq Ixxysnja Suitable for threads: - metric 0.20 - 12 mm Inch 80 - 2 Gg/ Diametral - Pitch thread 160 - 5.5 Dp Module 0.1 - 4

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm Kjdpfx Asupbf Deanjfa throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: ready for operation (used), GDW Romi T180 Lead and Feed Screw Lathe Centre height: 180 mm Swing over bed: 325 mm Swing over cross slide: 210 mm Spindle speed: from 50 to 2500 rpm Distance between centres: 1000 mm Spindle bore: 40 mm Tailstock: MT3 Cross feeds from 0.021 to 0.367 mm/rev Number of longitudinal feeds: 20, from 0.043 to 0.744 mm/rev Spindle brake Weight: approx. 1100 kg Space requirement: 2200 mm x 920 mm x 1400 mm (L x W x H) You are welcome to arrange a viewing appointment. Kfedpfjxfhukex Aanea We will be happy to organise affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. This requires a valid VAT identification number. Subject to prior sale. Visit our shop and view our other offers. Specified brand names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are subject to change.

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Kedpfju Rd H Isx Aanefa Center height : 250 mm Center width : 1500 mm spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: good (used), Year of construction: 1996, Weiler lathe Type Condor B Center height 165 mm Center width 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle head DIN 55027 size 5 Spindle bore 40 mm Inner taper main spindle MK 5 Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Weight 1040 kg 3 jaw lathe chuck Kodpfxjvbwd Rs Aanofa 4 jaw lathe chuck Multifix B Rotating center punch

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Kfjdpfxohgnd Aj Aanoa Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Swing over bed: 400 mm Swing over cross slide: 246 mm Distance between centres: 1270 mm Centre height: 195 mm Max. turning diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Kodpfx Aajxfrgdenefa Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Kjdpfx Aaow S Itujnefa Centre height: 240 mm Centre distance: 1250 mm Spindle bore: 55 mm Spindle speeds: 19–2000 rpm, motor output 5.5 kW Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition.

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm In good condition. Kjdpfxswah Rqo Aanjfa See data sheets for details.

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Kfedpfx Asxziuweanoa Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.