Used Leake Detector for sale (1,016)

Condition: used, Year of construction: 2013, Year: 2013 Condition: very good Counter status: about 5.6 million Technical specification: - Laminating speed: 25 m/min - Minimum sheet size: 200 × 200 mm - Maximum sheet size: 560 × 800 mm - Paper weight range: 115–600 g/m² - Max. feeder pile height: 520 mm - Film thickness: 24–50 μm - Film types: OPP, PET, Nylon - Heating time (laminating roller): approx. 4 min - Sheet overlap accuracy: ±1 mm - Machine dimensions (incl. table): 263 × 100 × 147 cm - Air supply: min. 6 bar - Max. air consumption: 95 l/min - Max. pressing force: 15 kN - Power consumption: 7 kW Hfedpey Iwirefx Akrjn - Machine weight: 650 k Configuration: - Suction feeder head - Vacuum pump - Automatic sheet overlap control - Double sheet / misfeed detection - Automatic sheet separation via built-in perforator - Anti-curl device (roller + bar) - Sheet separation detector - Separation roller with adjustable speed - Electronically controlled tearing section - Fixed delivery table

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Hfodpfx Ajzf Eh Uokron Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C Hfedpfezhub Asx Akren - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Suitable for systems according to DIN 30722-1 / 2 Hjdpfx Aozhwccjkrsfn Tested and approved according to DGUV Rule 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Condition: excellent (used), functionality: fully functional, first registration: 10/2025, fuel type: diesel, color: orange, fuel: diesel, operating hours: 255 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C55SC DEMO UNIT with the following features: Work Package 1 Front linkage, 3D, double-acting incl. safety hook CAT II / CAT I Top link slider and top link with passive tilt adjustment and vibration damping (accumulator) for front-mounted implements Active hydraulic tilt adjustment for tilt adjustment Electro-hydraulic implement relief Rest bracket required for drawbar, rear linkage Electro-hydraulic implement relief Rest bracket PTO shaft, mechanical, front 1000 rpm Hodpszd Dzdjfx Akrofn Flow control valve 1 Flow control valve, circuit 1, adjustable from 0-35 l/min Implement adjustment pump variable, line set to the front and rear return and leak oil line to the front and rear Hydraulic kit 2 - 1 multi-function joystick (large joystick) incl. direction switch and speed control - 3 double-acting control valves, 2 with floating position - 6 front quick couplings - 2 rear quick couplings, looped, connected to the front quick couplings via a T-piece Tire 31x13.5-15 Wide-track fender kit Comfort Package Air conditioning, driver's seat with air suspension incl. seat heating, left armrest WORK LIGHTS, FRONT Cabin, center-mounted Overall height reduced by 40 mm Hydraulic tilting device 7-pin socket, front for implement lighting Reinforced wheel load equalization Manual central lubrication system Hydraulic tilting device for superstructure frame, incl. control valve Heated exterior mirrors with bracket + switch Hydraulic oil level warning system Work lights, rear Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: used, Year of construction: 1957, power: 9 kW (12.24 HP), fuel type: diesel, maximum speed: 19 km/h, first registration: 07/1957, overall weight: 1,450 kg, total length: 2,730 mm, total width: 1,480 mm, total height: 1,660 mm, Bodywork has been restored, tires are in like-new condition, starting is problematic, performs worse when warm than when cold, oil leaks from the exhaust, starter is faulty, further information available by phone, German registration Vehicle is preferably sold to commercial businesses or for export, private sale possible with reservations Sale without warranty The above information is non-binding; errors/changes and prior sale are subject to change! Hsdpfszhm Tkex Akrefn

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 1,800 h, load capacity: 200 kg, lifting height: 14,700 mm, mileage: 30,000 km, TRUCK MOUNTED PLATFORM Multitel ALU 145 Year 2020 Installed on Mitsubishi Fuso Working height 14,7 m Horizontal outreach 7,7 m Basket capacity 200 kg Hours 1.800 Hjdpfxsyudutj Akrefn km 30.000 All working No oil leaks

Condition: used, This listing is for the Barkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals Hfjdpjyufrgjfx Akrjn The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Condition: excellent (used), Year of construction: 2007, Wood Cheaper for sale ! Manufacturer - BRUKS KLOCKNER Model - BK -DH 700X100 L Power - 2x500 kw el. motors Entry - 700x100 mm Number of knives - 6 Weight - 46 tons Equipment consits : - Input transporter 10 m - Metal detector Hedpfeyzfigex Akrjfn - Cheaper - Output transporter - El. Cabinet - Comand pult

Condition: good (used), Agilent HPLC system - including PC & software The list price includes the following 1100 series modules: - tray - degasser - pump - autosampler - column oven Hodpfx Aevk U Ncokrefn - VWD detector We can built almost any kind of HPLC setup according to your need. For the exact pricing please inquire. Available modules: Brand Series Model Type Quantity Agilent 1100 G1310A ISO pump 1 Agilent 1100 G1311A Quat pump 4 Agilent 1100 G1313A ALS 1 Agilent 1100 G1314A VWD 7 Agilent 1100 G1315A DAD 1 Agilent 1100 G1315B DAD 4 Agilent 1100 G1316A Column Oven 1 Agilent 1100 G1318A Column Oven 6 Agilent 1100 G1329A ALS 1 Agilent 1100 G1330A ALS Therm 1 Agilent 1100 G1330B ALS Therm 1 Agilent 1100 G1361A Prep pump 2 Agilent 1100 G1367A Well plate auto sampler 4 Agilent 1100 G1376A CAP pump 1 Agilent 1100 G1379A Degasser 4 Agilent 1100 G1379B Degasser 4 Agilent 1100 G2260A Prep ALS 1 Agilent 1200 G1315D DAD 1 Agilent 1200 G1330B FC/ ALS Therm 1 Agilent 1200 G1364C Analytical FC 1 Agilent 1200 G1367B Well plate ALS 1 Agilent 1260 G1314F VWD 1 Agilent 1290 G1330B Thermostat 2 Any questions please feel free to ask. Please check out our other listings as well.

Condition: used, mileage: 2,89,000 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C front axle 7.5 t, A1Z front axle in offset design, A2E rear axle with 440 crown wheel, hypoid, 13.0 t, B1B electronic braking system with ABS and ASR, B1F heating, electronic air supply unit, B2A disc brakes on front and rear axle, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5J brake and electrical connections, low, C0G rear frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D access behind cab, left, C5P frame bolted, C6G steering Servotwin, C6I servo pump, regulated, C6Q stabilizer front axle, C7F front underrun protection (ECE), aluminium, C7T integral rear, C8C rear axle fenders, 2500 mm vehicle width, C8H 3-piece fenders with EG splash guard, C8I splash guard (EG) front, C8Y underbody cladding, aerodynamic, D0A leather steering wheel, D0S compressed air connection in cab, D0U smoke detector in cab, D1C driver suspension seat, comfort, D1N co-driver functional seat, D2N seatback release, driver's seat, D3A comfort bed, upper, wide, adjustable, D3B comfort bed, lower, D3M PremiumComfort mattress, lower, D3N PremiumComfort mattress, upper, D3Q seat cover, velour, driver's seat, D3T seat cover, velour, co-driver and middle seat, D4S sun blind, one-piece, electric, windscreen, D4T curtain, across bed(s), D4Z sun blind, side, driver and co-driver side, D5Z carpet on engine tunnel, D6C electric stationary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater. You can reach us by phone Monday to Friday until 20:00 and Saturday until 16:00! More details: Leasing/financing and trade-in possible! Errors and prior sale excepted! All details without guarantee ... more on our homepage Hodpfx Aksu Nnf Serofn

Condition: used, mileage: 26,000 km, power: 85 kW (115.57 HP), first registration: 09/2015, fuel type: diesel, overall weight: 3,499 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Food truck / mobile sales unit, Iveco Daily HiMatic, 26,000 km Net selling price: €24,900 Base vehicle: IVECO DAILY HiMatic Registered: 09/2015 Mileage: 26,000 km MOT/Inspection: NEW Emission class: EURO 5 Transmission: Automatic (8-speed) Wheels: Grey powder-coated Floor: PVC Further equipment and detailed specifications can be found below! The vehicle was converted by a renowned workshop that has specialized in food truck conversions for over 10 years. Come and see the quality of the conversion for yourself! You are welcome to visit us in person during our opening hours for a no-obligation viewing. For questions: Christian Hirsch Please try again later as we are often in a customer meeting. You can find more food trucks here: ----More offers can be found here. Please do not send emails / no emails, as we can only process them sporadically due to time constraints. Thank you for your understanding!---- - Transmission: Automatic - Hi-Matic (8-speed) - ECO mode - Air suspension - Camera / parking assistance - On-board computer - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Electric windows - LED interior lighting with motion detector - Folding shelves - Sliding door from driver's cab to loading area - Box interior: Width: 206cm, Height: 210cm, Length: 435cm - Driver's seat: Height adjustable - Passenger seat: Folding Special equipment: - Long exterior mirrors, for vehicle width 2350 mm - Deletion of passenger double seat - Vehicle key with remote control - Generator 180 A - Front mud flaps - Central locking with preparation for door in superstructure - Airbag, driver's side - Trailer socket preparation - Anti-slip regulation (ASR) - Version: S-series - Exterior mirrors, electrically adjustable and heated - Brake assistant - Electronic brake force distribution - Rear axle suspension: Parabolic / Air - Front axle suspension: Transverse leaf spring - Windscreen and side windows tinted - Transmission: Automatic - Hi-Matic (8-speed) - Body/Superstructure: Box, Krone - Instrument cluster with pixel matrix display - Fuel tank: 70 liters - Headlamp level adjustment - Engine 2.3 L - 85 kW - Diesel - Radio preparation with speakers - Wheelbase 3750 mm - Seats in the cab: Passenger double seat with headrests - Maintenance indicator - Permissible total weight 3.50 t For questions: Christian Hirsch: ---- More offers can be found here. The equipment was determined with the help of a VIN query; technical errors may occur. Hedswicigepfx Akrefn Information provided on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Errors and prior sale are reserved.

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 85 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hfjdpov Nnbpofx Akron

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-350)xW(70-270)mm, (double film pulling possible for longer bags); suitable film width: 160-560mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hodpjv Nnbvjfx Akrefn

Condition: used, mileage: 62,000 km, power: 78 kW (106.05 HP), first registration: 12/2013, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: automatic, emission class: euro4, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35S11 , Size: 2 - Maxi , VAT showable. at least 20x in stock ----Please no eMails / no eMails can only be processed sporadically due to time constraints!!! Thank you for your understanding. ---- Opening hours and further information : Viewing and purchase possible without appointment: MO - DO: 9.00 to 16.00 FR: 9.00 - 13.00 SAT: 9.00 - 12.00 Address: Tabakried 11 84076 Pfeffenhausen D- Germany For questions: Christian Hirsch Please, try more often as we are often in a customer conversation. ----Checkbook maintained / Workshop maintained: yes Emission class: EURO 4 Environmental sticker: green Previous owner: 1 VAT deductible: yes Emission class: Euro 4 = green sticker -with / without air suspension in stock -LED reversing camera -Interior lighting with motion detector -Load compartment length 4.35m -Load compartment width 2.05m -Load compartment height 2.07m Folding passenger seat Interior equipment: Cup holder, power steering Exterior equipment: Sliding door, Electric side mirrors & heated, Central locking incl. remote control, Power windows - front Technology: Outside air temperature On-board computer Safety & Environment: Driver airbag,El. immobilizer ABS ESP Traction control Particle filter Hfjdpfx Aowuq Eaokron For questions: Christian Hirsch For questions: Christian Hirsch Please try more often as we are often in a customer meeting. Further offers under / Further offers under / Equipment was determined with the help of a VIN query, errors may occur for technical reasons may occur Opening hours and further information : Viewing & purchase possible without appointment: MO - DO: 9.00 to 16.00 FR: 9.00 - 13.00 SAT: 9.00 - 12.00 Address: Tabakried 11 84076 Pfeffenhausen D- Germany ---- The information provided on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale reserved Sale only to traders or export

Condition: used, mileage: 1,12,000 km, power: 70 kW (95.17 HP), first registration: 01/2013, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Mercedes Benz Sprinter MAXI – Box Body (SAXAS) Net sales price: €8,400 Euro 5 Please no emails, as these can only be answered sporadically due to time constraints! Thank you for your understanding! Opening hours and further information: Viewing / purchase without prior appointment possible: Viewing / purchase without prior appointment possible: No appointment necessary!!!! MO - THU: 09:00 – 16:00 FRI: 09:00 – 13:00 SAT: 09:00 – 12:00 Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, please contact Christian Hirsch or our friendly staff. TÜV (roadworthiness inspection): Will be renewed upon request with purchase – Full service history – 1 owner – LED interior lighting – Motion detector in cargo area – Sliding door between cab and box body – Reversing camera (see photos) – Various ventilation points – Foldable shelving – Electrically locked doors – Rear step Load compartment length: 4.40 m Load compartment height: 2.00 m Load compartment width: 2.00 m Special features: – Hill start assist – 220 A generator – Steering wheel (mechanically adjustable steering column) – Radio preparation – Front mud flaps – Rear stabilizer bar – Reinforced front stabilizer bar – AGM battery 95 Ah Further equipment: – Adaptive brake light – Driver’s airbag – Washer fluid level indicator – Electrically adjustable and heated exterior mirrors (both), mirrors with integrated indicators – Battery 74 Ah – Brake assist – Braking system with ABS + ASR – Roof lining in cab – Lockable glove box – Body / superstructure: box body – Fuel tank: main tank 75 L – Headlight range adjustment – Truck registration – Engine 2.1 L – 70 kW CDI – Wheelbase 4,325 mm – Smoker’s package – Tire repair kit with compressor – Low emissions according to Euro 5 – Seat covers / upholstery: Lima fabric – Maintenance interval display Assyst – Heat-insulating glazing – Permissible total weight: 3.5 t For questions: Christian Hirsch Please try several times as we are often in customer meetings. If you have any questions, Christian Hirsch or our friendly staff is at your disposal. For further offers: Equipment information was determined using a VIN inquiry; technical errors may occur. Hedpewm U Ipjfx Akrsfn Details provided online are non-binding descriptions and do not represent guaranteed features. The seller is not liable for typographical or data transmission errors / changes / input errors. Subject to errors and prior sale.

Condition: new, Year of construction: 2025, Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 10 cycles/minute; bag width: 250-450mm; bag length: 250-500mm; compressed air: 0.2m³/min, 6.5bar; power: 220V, 1 phase; dimensions of the machine: L1150xW950xH1570mm. Hfodpfxev Nllrj Akrjn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Horizontal packaging machine, DUPLEX MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Duplex version with higher cycle rate. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 25 cycles/minute; bag width: 100-300mm; bag length: 100-350mm; compressed air: 0.4m³/min, 6.5bar; power: 220V, 2kW, 1 phase. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hfjdpjv Nllxsfx Akren

Year of construction: 2025, condition: new, X-ray inspection system for middle-sized bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system L900xW920xH1825 mm; weight: 350 kg. Hjdpfx Aev Nm Inokrjfn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, X-ray inspection system for middle-sized bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 7 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L900xW920xH1825 mm; weight: 350 kg. Hsdpfxjv Nm Ius Akrofn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, X-ray inspection system designed for large trays, boxes, large bags. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 600 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 150 kVp, 7.5 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; X-ray beam: horizontal scan; conveyor belt height: 750 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 60 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L1800xW1300xH1900 mm; weight: 580 kg. Hfsdpfx Asv Nm Izekren Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, X-ray inspection system specially designed for glass bottles. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 85 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 150 kVp, 7.5 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 1100 ± 30 mm; conveyor speed (dependent on product dimensions): 10 –100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: : L3500xW1300xH1795 mm; weight: 700 kg. Hjdpov Nm Nfefx Akrsfn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, This listing is for an Astoria-Pacific 311 Chemistry Analyser The unit is in full working condition and is ready for immediate use This combination is for 1. Astoria-Pacific 311 AutoSampler 2. Model 302D Micropump - Computer controlled 3. Model 303 Flow System 4 Model 305D Digital Detector Overview of the Astoria-Pacific 311 Sampler The 311 XYZ Sampler is a core component of Astoria‑Pacific's modular segmented flow analysis systems, such as the Astoria and Astoria2 analysers: Hfsdjxhftiepfx Akrsn Functionality It acts as a random-access sample introduction system in an XYZ grid format, enabling automated handling of samples in liquid analysis workflows Integration & Automation It is typically integrated with detectors, peristaltic pumps, and cartridge bases to form a complete automated analyzer capable of walk‑away operation and high throughput, with assay results available within 15–20 minutes upon sample loading Throughput & Sensitivity When paired with the Astoria Analyzer, systems using the 311 sampler can process between 90 to 120 samples per hour, delivering part-per-billion detection capabilities along with efficient reagent usage (up to 10× lower compared to traditional SFA systems) System Flexibility The 311 sampler offers flexibility and ease of use, allowing automatic insertion of check calibrants and compatibility across different system configurations (e.g., Astoria2, SFA3000) Support Modules For optimal performance, it can be paired with auxiliary modules such as the 322 Auxiliary Pump, which serves as a dedicated wash pump for the sampler4115 302D 303 305D Autosampler +

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH CS-500, a bolted-type cement silo with a capacity of 500 tons, is specially designed for large-scale concrete plants, cement terminals, and cement factories with high cement consumption. It is also widely used for the safe storage of limestone powder and similar materials. Thanks to its modular design, the CS-500 model is easy to transport and can be quickly assembled on site. The silo offers long-term use with its high-strength steel body, sturdy foot structure, and precision manufacturing technology. Laser cutting and drilling methods are used in its production to ensure perfect fit and leak-proofness. All static and mechanical calculations for the CS-500 are performed using ANSYS Workbench CAE software, ensuring safe storage without any deformation under a 500-ton cement load. The silo is supplied complete with all equipment, including a maintenance platform, filling pipe, internal and external manholes, pressure relief valve, air filter, and butterfly valve. One coat of anticorrosive and two coats of epoxy paint applied to the silo provide maximum protection against external factors. It can also be equipped with a cement screw conveyor and manual discharge systems upon request. CS-500 - 500 Ton Cement Silo Technical Specifications Hfedpsxpi Nqefx Akrsn Silo Capacity: 500 tons, 385 m³ (cement density 1.3 tons/m³) Silo Height: 19,945 mm Silo Diameter: Ø 6,180 mm Number of Silo Legs: 6 Silo Outlet Diameter: Ø 300 mm Number of Components: 250 Silo Weight: 28,000 kg Silo Leg Material: Ø273 x 12 mm Steel Pipe Silo Leg Supports: NPL 80 mm Metal Sheet Silo Leg Plates: 20 mm Conical Part Support Material: 200 mm Steel C Channel Conical Part Material: ST-37, 8 mm Metal Sheet Silo Body Material: ST-37, 8 - 6 - 5 mm Metal Sheet Silo Top Cover Material: ST-37, 6 mm Metal Sheet Filling Pipe: 4" Steel Pipe (up to the silo foot) Internal Manhole: Available External Manhole: Available Railing on Silo Roof: Available Maintenance Platform: Available Structural Analysis: Production process is carried out according to approved projects. Why Choose the CS-500 - 500-Ton Cement Silo? CONSTMACH CS-500 stands out not only for its high storage capacity but also for its durability, safety, and ease of installation. Manufactured based on engineering calculations, these silos operate smoothly for many years with minimal maintenance requirements. CONSTMACH offers reliable and economical solutions to its customers with equipment manufactured to high quality standards. Therefore, the CS-500 cement silo is one of the most sensible choices in terms of both performance and investment efficiency. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Hjdpfx Akjw U A Skerefn Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt