Used Leake Detector for sale (971)

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Itsdpfx Aozqbmdsgpok Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, functionality: limited functionality, power: 87 kW (118.29 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 16,000 kg, Year of construction: 2007, operating hours: 11,500 h, Equipment: cabin, We are offering a New Holland MH CITY mobile excavator/loader with a split boom for sale. Registration number: 300/25. Defects: Oil leakage on the driveshaft, leaking swivel bearing, the electrical system is not fully functional, and the hydraulic quick coupler cannot be opened. Otherwise, the machine is roadworthy, and the engine and hydraulics are in good working order. Technical data: Engine: CNH 87 kW Operating hours: 11,xxx Year of manufacture: 2007 Weight: 16 t Equipment: Suspended seat, crane hook, hydraulic connections on the boom, manual engine speed control, radio, lighting, dozer blade. Accessories: Hydraulic quick coupler Digging bucket, 97 cm wide, 0.8 m³ volume Transport dimensions: Length: 7.6 m Width: 2 m Height: 3 m Itedeztvgdspfx Agpok Weight: 16 t Loading and transport to the destination are possible by arrangement. The stated price is exclusive of VAT.

Condition: used, functionality: fully functional, empty load weight: 1,780 kg, Year of construction: 1996, operating hours: 2,168 h, We are offering a Gehl wheel loader, model SL3825sx, for sale. Condition: Fluid leak Itodpfxezvahde Agpek Registration number: 320/26 Technical specifications: Engine: Kubota diesel, 21 kW Year of manufacture: 1996 Operating hours: 2168 Weight: 1.738 t Load capacity: 0.45 t Accessories: 1x front bucket 1x pallet fork Transport dimensions: Length without bucket: 2.7 m Width: 1.45 m Height: 1.7 m Weight: 1.739 t The price does not include VAT. Loading and cost-effective transport to the destination can be arranged.

Condition: used, functionality: limited functionality, Year of construction: 2017, operating hours: 8,041 h, load capacity: 25,000 kg, fuel type: electric, drive type: Elektro, Tractor Condition: Limited operational readiness Technical condition: poor Iodpfx Ajxlwtcjgpetk Battery voltage: 80V Description: oil leak from the steering gear

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Iedpfx Agex Ari Hjpstk Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour Itodpjw R T Diefx Agpjk The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Iodpfezt R D Rox Agpjtk Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) Ijdjztm Hbopfx Agpetk • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: Itjdeztm Dmopfx Agpok • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Year of construction: 2013, condition: good (used), For Sale: Well-maintained in-line system for use behind a Multivac packaging machine. This in-line system ensures a transition from 4 tracks to 1 track and subsequently passes through a metal detector with an ejector. Brand: Automation Systems BV Type: Automation Systems BV in-line robot with a Mettler Toledo metal detector with ejector Robot type: BCE001 Year of manufacture: 2013, voltage: 400 V, 16 A Isdpfxezt Ib Ts Agpotk It is possible to inspect this machine on-site. - Transport can be arranged. - Export documents will be provided if necessary. - Proper loading is included. If you have any questions or comments, please do not hesitate to contact us.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement. Itsdpfsw Sfg Ejx Agpek

Condition: excellent (used), Vötsch VC³ 4018 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine type: Climate testing chamber / Temperature testing chamber Design: Air-cooled Test chamber volume: approx. 190 liters For sale is a used climate testing chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical data: Temperature range: -42 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation, temperature operation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Itsdpfjzc Ht Isx Agpsk Temperature deviation (time) in climate operation: ± 0.1 to ± 0.3 K Temperature homogeneity (spatial) in climate operation: ± 0.5 to ± 1 K Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation, climate operation: approx. 400 W Test chamber dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Cabinet dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant quantity: 2.50 kg Max. condensation pressure: 22.5 bar g Max. evaporating pressure: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Test chamber lighting: Halogen, 2 x 24 V / 50 W Equipment Touch panel operation Viewing window in the door Stainless steel test chamber Test chamber lighting Side openings Shelves / Internal equipment as shown in the pictures Documentation / Operating manual Additional accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures Inspection possible by appointment Safety note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown in the pictures. Subject to change and errors in technical data as well as prior sale.

Condition: excellent (used), Vötsch VT³ 7012 S2 Temperature Shock Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Machine Type: Temperature Shock Chamber Test Chamber Volume: 125 liters Offered is a used Vötsch VT³ 7012 S2 temperature shock chamber for rapid temperature changes and environmental simulation tests. The system is suitable, among other things, for electronics, component, material, and assembly testing, quality assurance, research and development, as well as aging and stress tests. Technical Data: Ijdpfx Aeztwk Regpetk Temperature Range, Hot Zone: +50 °C to +220 °C Temperature Range, Cold Zone: -80 °C to +70 °C Test Chamber Volume: 125 liters Max. Load: 50 kg Cooling: Water-cooled Refrigerant 1: R404A Refrigerant Quantity: 1.70 kg Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Refrigerant 2: R23 Refrigerant Quantity: 1.27 kg Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Standby Pressure: 14 bar g Power Connection: 3/N/PE AC 400 V +10 % / 50 Hz Rated Power: 10 kW Rated Current: 25 A Dimensions: Test Chamber Dimensions (W × D × H): 470 × 650 × 410 mm External Dimensions (W × D × H): 970 × 2350 × 2450 mm Equipment: Programmable Touch Panel Control Two Temperature Zones Water-Cooled Refrigeration System Observation Window Test Chamber Lighting Temperature Display Status Display Test Item Holder / Transfer Basket Test Item Feed-Through Accessories as Shown in Pictures Shipping Information: External Dimensions: 970 × 2350 × 2450 mm (W × D × H) Weight: 1000 kg Shipping by freight forwarder possible. Condition: Used Optical Condition as Shown in Pictures Nameplate Present Scope of Delivery: 1 × Vötsch VT³ 7012 S2 Temperature Shock Chamber Programmable Touch Panel Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The device is available. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch VC³ 4018 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine type: Climate testing chamber / Temperature testing chamber Design: Air-cooled Test chamber volume: approx. 190 liters For sale is a used climate testing chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical data: Temperature range: -42 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation, temperature operation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range temperature: +10 °C to +95 °C Itodjztu Nqopfx Agpek Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation (time) in climate operation: ± 0.1 to ± 0.3 K Temperature homogeneity (spatial) in climate operation: ± 0.5 to ± 1 K Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation, climate operation: approx. 400 W Test chamber dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Cabinet dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant quantity: 2.50 kg Max. condensation pressure: 22.5 bar g Max. evaporating pressure: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Test chamber lighting: Halogen, 2 x 24 V / 50 W Equipment Touch panel operation Viewing window in the door Stainless steel test chamber Test chamber lighting Side openings Shelves / Internal equipment as shown in the pictures Documentation / Operating manual Additional accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures Inspection possible by appointment Safety note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown in the pictures. Subject to change and errors in technical data as well as prior sale.

Condition: new, functionality: fully functional, Year of construction: 2026, Designed for high-capacity mining and quarrying operations, this stationary crushing and screening plant has a production capacity of 600–750 TPH. Equipped with a three-stage crushing system (Primary Impact Crusher + Secondary Impact Crusher + Vertical Shaft Impact Crusher) and multi-deck screening units, it delivers high efficiency while producing high-quality, cubical aggregates. According to the detailed engineering design, the plant consists of the following equipment: Main Equipment Feeding Group TB-60 Vibrating Feed Hopper Isdpszqadusfx Agpetk 60 m³ capacity 2 × 11 kW motors 1400 × 2500 mm Wobbler Feeder 22 kW motor Automatic lubrication system 1000 × 5000 mm Wobbler Under Conveyor 5.5 kW motor Reversible operation PDK-1415 Primary Impact Crusher 355 kW main motor 3 kW auxiliary motor Designed for the primary crushing of soft and medium-hard stone TE-1848 Vibrating Screen Screen size: 1800 × 4800 mm 2-deck configuration 18.5 kW motor DMK-03 Secondary Impact Crusher Rotor size: Ø1120 × 1500 mm 315 kW main motor 3 kW auxiliary motor TE-2470 Vibrating Screen Screen size: 2400 × 7000 mm 4-deck configuration 2 × 30 kW motors VSI-1000 Vertical Shaft Impact Crusher Designed with 2 × 315 kW motors Produces high-quality cubical aggregates and premium manufactured sand TE-1650 Vibrating Screen Screen size: 1600 × 5000 mm 2-deck configuration 18.5 kW motor Conveyor Belt System Multiple belt conveyors throughout the plant with widths ranging from *650 mm to 1200 mm* and lengths from *5 m to 30 m* High-speed conveyors (126 dld) for efficient material flow Metal detectors and magnetic separators on selected conveyor lines for foreign material removal Belt-pulley drive systems with heavy-duty drum construction Control Cabin & Electrical System Central control cabin for complete plant operation Individual electrical panels with dedicated circuit breakers for each piece of equipment Total installed power: approximately 2,109.4 kW Why Choose This Plant? Continuous production capacity of 600–750 TPH Three-stage crushing system (PDK + DMK + VSI) for producing high-quality, cubical aggregates in the desired gradation Accurate product sizing with multi-deck vibrating screens (TE-1848, TE-2470, and TE-1650) Safe and clean production with conveyor lines equipped with metal detectors and magnetic separators Turnkey installation based on a detailed engineering design Customizable capacity and equipment configuration to meet specific customer requirements For more detailed technical information, pricing, and installation planning, please feel free to contact us.

Condition: excellent (used), Year of construction: 2004, operating hours: 76 h, machine/vehicle number: HF112305, Size 47 x 66 cm, Console DTC (Sakurai Delivery Top Console) with Touch Screen, Full Remote Control Operation, SIS (Sakurai InterActive System) for make-ready, Plate Running Register system, SAS (Sakurai Auto Set) for paper size and thickness, SPC (Semi-automatic Plate Change), Cocking Register, Automatic Washers: Blanket Cylinders & Inking Rollers, Olivermatic Dampening, Baldwin Refrigeration System & Bal Control, Feeder with Suction-belt feed table, Electronic Double Sheet & Side Lay Detector, Chromed Impression Cylinders, Perfector 4/0 - 2/2 (Fully automatic), Semi-High Pile delivery, Powder Spray. Itodpszubgrofx Agpsk

Condition: new, functionality: fully functional, Available: Heating unit for FINPRESSE 130-1-12 press plates – 18 kW, temperature up to 130°C. The machine is brand new and offered to order. Before placing an order, we confirm the current delivery time and the exact configuration of the unit. The main advantage of the unit is its independent heating and forced oil circulation system, which enables precise heating of the press's work surfaces. The 18 kW heating unit, LOWARA circulating pump, and digital temperature control ensure stable conditions during the gluing, veneering, laminating, and pressing of wood and panel components. Ijdpoztl R Sefx Agpstk Specifications: • Manufacturer: FINPRESSE s.a.s. • Model: 130-1-12 • Type of equipment: Mobile heating and circulation unit for press plates • Heating medium: diathermic oil / thermal oil • Power of the heating unit: 18 kW • Maximum operating temperature in configuration with LOWARA CEA80/5/D-V pump: 110°C • Digital temperature regulation and control • Power supply: 400 V • Power system: three-phase, 3F + PE • Manufacturer of circulating pump: LOWARA • Pump model: CEA80/5/D-V • Pump design: version with FKM elastomers • Pump motor rated power: 0.75 kW • Pump capacity: 30–100 l/min, i.e. approximately 1.8–6.0 m³/h • Suitable for presses with shelf lengths up to 3.0 m • Pump motor speed: approximately 2875 rpm • Pump motor protection rating: IP55 • Independent control of the circulating pump and heating unit • Pump start-up indicator • Heating start-up indicator • Indicator light for reaching the set temperature • Fault indicator for the heating unit • Main power disconnect switch • Temperature sensor for the medium • Expansion tank located above the heating system • Separate supply and return manifolds • Multi-point connections enabling connection of press plate circuits • Tray for collecting any oil leaks • Drain connection • Mobile construction on transport wheels with locking capability • Weight: approximately 200 kg • Overall dimensions: approximately 140 × 45 × 240 cm (L × W × H) • Technical and operating documentation in Italian • Complies with CE requirements Applications: • Heating of work surfaces of hydraulic platen presses • Maintaining the set temperature during pressing and gluing of components • Veneering and laminating of furniture panels, MDF, plywood, and wood • Applying HPL laminates, natural veneers, and other surface materials • Pressing of furniture fronts, doors, and composite components • Stabilizing the temperature during bonding and curing of adhesives Additional information: • The equipment is offered to order • Current delivery time is confirmed before placing an order • The pictures show the offered model of the equipment in an example configuration • Maximum operating temperature depends on the pump used, seals, and type of thermal oil • Configurations designed to operate at temperatures up to 130°C • The machine is covered by a warranty under the conditions specified by the manufacturer • The price stated in the auction applies to export sales/WDT with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport with the MDD fleet or through external carriers • We help in obtaining a lease or leasing loan • Delivery costs depend on the destination and the method of transporting the equipment

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers Iedpezhub Asfx Agpetk - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Important Pricing Information: We offer flexible terms to suit your needs. The standard price is €700,000. Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Furnace chamber made entirely of stainless steel, double-walled for water cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and servicing. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Iedpfozkwp Isx Agpetk Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required

Condition: used, mileage: 2,66,109 km, power: 190 kW (258.33 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2019, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, * German vehicle from first owner * MOT expired, steering gear leaking * Tow bar, 3,500 kg towing capacity * V6 engine, 2,987 cc * All-wheel drive * Reversing camera * I am happy to send you a video via WhatsApp * WhatsApp: * Polish contact, ????? ?????: * Sale on behalf of customer, no warranty, all information subject to change, sale subject to prior sale Itsdpfx Agjzu Ugljpjk Additional equipment: Driver/passenger airbag, drive type: all-wheel drive, audio system Audio 20 (with touchpad), rear bumper step, electrically adjustable and heated exterior mirrors (both sides), 'Progressive' design and equipment line, trailer coupling wiring kit, driver assistance system: Agility Select / Dynamic Select (driving mode switch), driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: downhill speed regulation (DSR), driver assistance system: hill start assist, driver assistance system: traffic sign recognition, vehicle setup (online services / apps), electric windows front and rear, windscreen with upper band filter, heated rear window, auto-dimming interior mirror, Isofix child seat anchor points on rear seat, body/construction: flatbed, double cab, automatic climate control (Thermotronic), driver's knee airbag, comfort suspension (Agility Control), communication module (LTE) prepared for Mercedes me connect, head airbag system (windowbag), multifunction steering wheel, alloy wheels, Mercedes-Benz emergency call system, metallic paint, engine 3.0 L - 190 kW CDI CAT, Garmin MAP Pilot navigation module, wheelbase 3,150 mm, tyre pressure monitoring system, spare wheel in driving specification, reversing camera, low emissions according to Euro 6 standard, heated windscreen washer system, load anchoring rail system, front side airbags (sidebags), front passenger seat height-adjustable/removable, seat upholstery: fabric, heated front seats, sound system, start/stop system, 12V socket, bumpers in vehicle colour, style package, carpet in passenger compartment, exterior door handles chrome, underrun protection (black), navigation system preparation (Garmin MAP Pilot), winter package, heat-insulating glazing, additional heater Interior mirror automatically dimming, rain sensor, heated front seats

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact granulators of the GSC series are fully sound-insulated granulators and therefore operate with particularly low noise levels. The integrated soundproofing, thanks to its sophisticated design, ensures optimal accessibility to the granulator itself as well as for knife and screen changes. The noise reduction is based on the use of state-of-the-art soundproofing materials. The housings, manufactured from a robust steel/welded construction, combined with the V-cut rotors (except for the GSC 300/300), ensure a long service life and offer universal applicability. The tangential housing geometry allows the rotor to reliably feed and granulate even bulky input materials. All machines of the GSC series consistently deliver high-quality regrind, regardless of whether the input material consists of injection or blow molding waste, profiles, sheets, or films. Itsdpsyr I E Djfx Agpek The GSC series models are cost-effective, highly reliable, easy to clean, and built for long service life. Integrated sound insulation: The integrated sound insulation guarantees a comfortable working environment with low noise emissions. The optimized design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation allows the granulators to remain compact and mobile. The machines can be transported to any desired work site using a pallet truck or forklift. ZERMA offers a wide range of options such as extraction systems, conveyor belts, metal detectors, and fine material separators.

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are exceptionally robust machines designed for the most demanding applications and tailored to the diverse requirements of modern recycling operations. Ijdsyr Thdopfx Agpotk The housings, constructed from heavy-duty steel and welded for maximum strength, withstand even extreme loads. All assemblies related to bearing support, knife mountings, and the rotor shaft are significantly oversized, resulting in outstanding durability. With simple reconfiguration, the machines can effortlessly shred both massive lumps, thick-walled pipes, and also hollow bodies or films. Depending on specific requirements (including for temperature-sensitive materials), various rotor designs are available, all featuring the advanced and superior V-cut technology. All GSH series machines consistently deliver high-quality regrind – whether processing bottle crates, profiles, sheets, films, start-up lumps, or pipes. They are economical, exceedingly reliable, easy to clean, and built for long service life. When combined with ZERMA’s extensive range of options and accessories—such as extraction systems, conveyor belts, metal detectors, fine particle separators, roll-feed devices, etc.—as well as spare parts, the result is a custom-optimized size reduction solution. The advantages include significantly reduced costs, time, and personnel requirements. Thoughtful machine housing design The housing is centrally divided at an angle, and the upper section with feed hopper can be opened hydraulically, providing unrestricted access to the rotor for knife changes and cleaning. The screen insert is also held in place by a hydraulically swiveling screen cradle, ensuring optimal accessibility for quick removal and installation. The screens are reversible. Rugged external bearing arrangement Another well-conceived design feature is the external bearing arrangement. Heavy-duty rolling bearings in steel bearing housings guarantee long service life and are ideal for even the toughest demands. The external bearings prevent grease from entering the cutting chamber, as well as preventing regrind or fine particles from getting into the bearings. This offers a distinct advantage, particularly during wet operation. Flywheel To absorb shock loads during granulation, an optional flywheel is available. For this purpose, the rotors are supplied as standard with a second shaft end. High operational safety All granulators conform to EU machinery directives and carry the CE mark. Accident prevention is ensured, for example, by run-down safety devices with limit switches, as well as hydraulically unlockable non-return valves.

Condition: new, machine/vehicle number: Baureihe GSP, When shredding long pipes and profiles, conventional granulators face significant challenges. In most cases, pits or platforms are required to feed the long and bulky parts. Itsdpfx Aoyr Thkegpjk This is why ZERMA developed the GSP series. Thanks to the nearly horizontal feed hopper, long pieces can be easily fed, and the risk of blockage is eliminated as the machine meters the material automatically. When the grinding chamber is overfilled, no further material is accepted until the machine can operate again without overloading the motor. ZERMA also offers a wide range of options such as extraction systems, conveyor belts, metal detectors, fine material separators, and more.

Condition: used, Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning medium via a spray process. The machine operates as a top-loading unit with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance departments and industry. The Iso version features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced. Technical data: - Basket diameter: 1,100 mm - Usable height: 500 mm - Load capacity: max. 350 kg - Tank capacity: 250 l Ijdpfx Ajzry Dwsgpetk - Power: 15.4 kW - Operating temperature: max. 75 °C

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 3 kg, first registration: 04/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED ROLL-OFF CONTAINER FOR BULKY WASTE WITH HYDRAULIC LID, PASSENGER SIDE OPENING AND DRIVER SIDE HINGES, REAR OPENING WITH SINGLE DOOR AND LEAK-PROOF TAILGATE REF: 26-U-49 TYPE: bulky waste NEW: no LID: yes OPENING: rear with single door OVERALL DIMENSIONS Ijdpfsy Dwavex Agpstk TOTAL EXTERNAL LENGTH: 6.90 m EXTERNAL BODY WIDTH: 2.50 m INTERNAL / EXTERNAL FRONT SIDE HEIGHT: 1.80 m / 2.20 m INTERNAL / EXTERNAL REAR SIDE HEIGHT: 1.80 m / 2.20 m INTERNAL / EXTERNAL LATERAL SIDE HEIGHT: 1.80 m / 2.20 m VOLUME: 28 m³ WEIGHT: 3,230 kg FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOR: black Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales department for up-to-date pricing and terms. For further information: Loris: +39 3484773001 URL: #therolloffspecialists AURORA ROLL-OFF SYSTEMS Operates in the purchase and sale of industrial and commercial vehicles, mainly specializing in the waste management sector. Specialized in trucks, trailers, and roll-off equipment. With an inventory ready for immediate delivery of over 50 trucks and more than 150 bodies and containers, with or without roll-off cranes. Errors and omissions excepted. Given the high number of listings and details, Aurora invites you to confirm the information provided with our sales staff.