Used Lever Shear for sale (2,922)

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Iasdowcqmaopfx Ad Nsw Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Iodpfjxgbwzex Ad Nsaw Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: new, Year of construction: 2026, TBS – Manual Sheet Metal Shears Manual sheet metal shear Suitable for cutting construction steel, aluminum, copper, zinc, and plastic Isdpfscnxc Rex Ad Noaw High-quality steel cutting blades with a hardness of HRC55-60 Equipped with two operating handles Features a front support surface with a scale and an adjustable rear stop 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Item No. 3746020 Technical data Working width max. 2000 mm Sheet metal thickness max. - material tensile strength 400N/mm² 1.25 mm Rear stop range 0-300 mm Weight 511 kg Dimensions in mm 2450 x 1100 x 1050 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 69 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: CybTouch 8, working width: 4,100 mm, cutting angle (min.): 2 °, cutting angle (max.): 2 °, stroke rate (min.): 10 1/min, sheet thickness (max.): 10 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), overall weight: 13,000 kg, total length: 5,000 mm, total width: 2,900 mm, total height: 2,000 mm, number of support arms: 4, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Baykal Guillotine Model MGH 4100x10mm Machine Description: The machine is built with a modern design and a swing beam construction with a fixed cutting angle, providing high safety, strength, and efficiency in operation. This swing beam design offers several advantages over linear motion shears, such as: Fast blade gap adjustment Iajdpfx Adozkrq He New High-quality, clean, distortion-free vertical cuts Extended blade life due to minimized friction between upper blade and material Adjustable cutting length Technical Data: Parameter Value Cutting capacity – steel (450 N/mm²) 10 mm Cutting capacity – stainless steel (700 N/mm²) 6 mm Cutting length (nominal) 4060 mm Cutting angle 2.0° Main motor power 22 kW Number of hydraulic cylinders 23 Strokes per minute 10 Hydraulic tank capacity 170 liters Back gauge stroke 1000 mm Back gauge motor power 0.37 kW Machine weight 13,000 kg Machine dimensions (L×W×H) 4820×3700×2200 mm Standard Equipment: Heavy-duty welded frame for excellent dynamic stability during cutting Swing beam supported on roller bearings Hardened, alloy steel blades with 4 cutting edges (both upper and lower blades)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Technical data Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm Iodpfx Adozi Ezvj Njaw - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. Iaodpfx Adoy Uquhe Now The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s weight 36.000 kg dimensions 4700 x 3535 x 2980 mm Isdpfozkvx Isx Ad Noaw

Condition: good (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 12 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,100 mm, tool weight: 31,500 g, working length: 3,000 mm, VOLZ EURO-CUT 12 x 3050 sheet metal shear - Rated performance, sheet metal thickness, steel: 450 N/mm² - Sheet metal thickness: 12 mm Iasdpfozkhywsx Ad Njw - Max. speed: 88 mm/s feed rate Please note: the item must be picked up on a date to be determined between September 15 and September 17, 2026. FCA D-76474 Au am Rhein – loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min Iodpfx Adozkvx Us Nsaw back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: good (used), Demolition shears, demolition pliers, hydraulic demolition shears -Demolition shears: Hydraulic demolition shears, without hydraulic power unit -Opening width: 290 mm -Transport dimensions: 950/800 (H140 mm Iaedpfxozkkc Is Ad Njw -Weight: 94 kg

Condition: good (used), functionality: fully functional, Year of construction: 1978, Used conventional press brake by Darley Type AP 150 3100 Capacity: 3100 x 150 tons Iodpfx Adozk Hl Eo Njaw Simple operation The front beam partially sinks into the ground Includes tooling

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Iedpozk Akdsfx Ad Noaw Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 4 mm, table height: 740 mm, input voltage: 400 V, type of input current: three-phase, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 4×2500 + LASER 4 × 2500 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 4 mm Maximum cutting length: 2500 mm Blade rake angle: 1° 30′ Number of strokes per minute: 20 Back gauge travel: 600 mm (standard) Distance between side frames: 2650 mm Blade length: 2550 mm Table height: 740 mm Motor power: 5.5 kW Weight: 3800 kg Machine dimensions (L × W × H): 3130 × 2030 × 1600 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line (laser guide) Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English language) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. Iajdpfxeyt E Ais Ad New If you are interested in other machines, we encourage you to visit our website.

Condition: good (used), punching pressure 60.0 t punching cross-cut in cmm 31 in 15 mm square edge steel 40.0 mm L-beam 160 x 80 mm flat steel 400 x 16 mm throat 400 mm round bar steel 40.0 mm total power requirement 5.5 kW weight of the machine ca. 1.950 kg dimensions of the machine ca. 1700 x 1050 x 1980 mm good / well-maintained condition (!!) Features: - Stop / support table at the punching station - Support table at the notching station Iajdpfxozkbnno Ad New - Flat steel blade, 375 mm long, with four cutting edges, - also for cutting angle iron at 45° - Material support table with stop bar on the flat steel shears - Section steel blade for cutting 90° angle steel as well as round and square steel - Scraper, swiveling - Square notching device with stop table - 2 foot switches and electrical controls - Connector for external engagement - Integrated hydraulic power unit - Three-phase motor, 400 volts, 50 Hz - Various insert tools such as punches and dies

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Iasdpfozh Dtzjx Ad Now Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: used, Year of construction: 1986, functionality: fully functional, Hydraulic CNC plate shear Fischer DHS 10 / 3000 Maximum cutting length / sheet width: 3,000 mm Maximum sheet thickness, normal steel: 10 mm Maximum sheet thickness, stainless steel / V2A: approx. 6 mm Iedpfx Adszl Twqs Nsaw Control: CNC-controlled back gauge Machine weight: approx. 7.5 to 9.0 tons Installation dimensions L x W x H: approx. 3.80 m x 2.20 m x 2.00 m

Condition: new, Hydraulic plate shear Fintek Type/Model: TS 2080 x 6.5 Condition: New Exclusive: Trade fair machine EURO-Blech Hannover 2026 Compact hydraulic plate shear, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the positioning and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving the hands free to align the workpiece. Technical data Cutting length: 2080 mm Sheet thickness: 6.5 mm Strokes/min: 24 - 36 Number of clamps: 12 Clamp pressure: 5.6 t Front support arms: 1000 mm Rear stop: 600 mm Cutting angle: 1/2 - 2° Motor power: 11 kW - High-quality, high-alloy shear blades with a high chromium content, suitable for stainless steel - Upper blade 2-edged, lower blade 4-edged - Hydraulic cutting angle adjustment ensures a clean, low-distortion and precise cut at any sheet thickness Isdjzh Uuispfx Ad Neaw - Manual cutting gap adjustment (models from 4.5 mm and larger) - Excellent visibility of cutting lines via LED with shadow projection - High number of strokes per minute ensures fast operation - Generous support arms with adjustable stop - Side stop with double scale (metric/imperial) - Feed work table with ball rollers for effortless movement of the sheet - Continuous front guard - Hydraulic, independent clamps ensure perfect clamping of the sheet at all times, regardless of the degree of wear of the clamps, by applying the same pressure (no slippage or dragging of the sheet during cutting) - Manual rear stop 600 mm - Overload-protected hydraulic system - Mobile control panel with safety foot switch and emergency stop button - High performance and reliability - Various options available, e.g. small parts diverter, NC-controlled rear stop with intuitive control via touch screen, angle stop, sheet lifting device, etc. - Current CE conformity Options: - Pneumatic sheet lifting device with: - Selector switch for sheet return on the operator side or the rear of the machine - Integrated rollers for even and smooth removal of the cut material - Increased motor power for more strokes/min - Rear stop with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC rear stop 800 mm controlled via ball screw using M15S or FATEK control Inquiry item! Shipping costs in individual offer.

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Iaodpfxjzi Rl Tj Ad Nsw Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Iajdpsxyq Icsfx Ad New

Condition: new, Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving your hands free to align the workpiece. Technical data: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Downholder pressure: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy shear blades with a high chrome content - Upper blade with 2 cutting edges, lower blade with 4 cutting edges Isdpfx Aotvnczjd Nsaw - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Lateral stop with double scale - Feed worktable with ball rollers - Full-length front intervention guard - Hydraulic, independent hold-down device - Manual back gauge 600 mm - Overload-protected hydraulic system - Safety foot switch Options: - Hydraulic sheet holding device - Increased motor power for more strokes / min - Back gauge with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC back gauge 800 mm with M15S control unit - CE conformity

Condition: used, functionality: fully functional, Year of construction: 2003, Hydraulic plate shear Manufacturer: GASPARINI, Type: CO 3006 Year of manufacture: 2003 Technical data Manufacturer: GASPARINI Type: CO 3006 Year of manufacture: 2003 Sheet width: 3050 mm Stand distance: 3200 mm Overhang: 510 mm Iedpfx Aszh Id Rod Noaw Sheet thickness: 6 / 8 mm ST / VA 4 mm Rear back gauge: 750 mm Cutting angle: 0.5 - 2.5° Power: 7.5 kW Machine weight: approx. 9 t Dimensions: approx. L 3.65 x W 2.2 (plus support arms) x H 1.9 m Equipment • Controlled rear back gauge 1000 mm, can be swiveled upwards • Control system DELEM DAC150 • Ball rollers in the support table • Foldable finger guard • Front angle back gauge + support arm • Central cutting clearance adjustment • Automatic cutting angle adjustment • Pneumatic hold-down device • Cutting edge lighting • Rear guard with side protection grilles • Spare blades All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Iaedpfx Adozi Uq Hs Nsw Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: used, Mobea hand-operated profile and sheet metal shear Type/Model: Mubea 5SN/10R Condition: Used Technical data Sheet metal thickness max.: 10 mm Flat material: 80 x 13 mm Round material: up to 22 mm diameter Square material: 22 x 22 mm Weight: approx. 106 kg (including lever) Iaodpfxszhuv Te Ad Njw Machine dimensions: approx. 1400 x 350 x 900 mm (including base frame)

Condition: used, functionality: fully functional, Year of construction: 2009, control type: PLC-controlled, Hydraulic plate shear Manufacturer: DURMA, Type: SB 3013 NT Year of manufacture: 2009 Iedpfxozhwfws Ad Njaw Technical data Manufacturer: DURMA Type: SB 3013 NT Year of manufacture: 2009 Cutting length: 3100 mm Sheet thickness: 13 mm Stroke: 130 mm Stroke rate: max. 13/min. Dimensions: approx. L 4.25 x W 2.40 x H 2.40 m Weight: approx. 12 t Equipment • Controlled back gauge up to 1000 mm, can be pivoted out of the way • Angle gauge • Safety light curtain for the rear of the machine • Central cutting gap adjustment • Foldable finger guard 1000 mm • Siemens PLC control • Ball rollers in the support table All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1993, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t Ijdpszly Hxofx Ad Neaw